WELCOME MAINT OF OFFRS MD ACCN AT VIKRAM VIHAR AND OTHER ALLIED WORKS UNDER AGE B/R-I AND AGE E/M OF GE (SOUTH) DELHI CANTT-10

M&L for rendering 10 mm thick with ready mix plaster on stone masonary surface/ other than fair faces surfaces finished even and smooth without using extra cement including taking down existing cement plaster complete all as specified & as directed. Note: Rate for scaffolding arrangement to carry out the work upto 4 storey building deemed to be included in the quoted rate.

M&L for rendering 5 mm thick with ready mix plaster on stone masonary surface/ other than fair faces surfaces finished even and smooth without using extra cement including taking down existing cement plaster complete all as specified & as directed. Note: Rate for scaffolding arrangement to carry out the work upto 4 storey building deemed to be included in the quoted rate.

M&L for preparation of newly plastered surfaces of wall/ceiling sufraces and applying 1mm thick (average thickness) waterproof cement based putty and thereafter apply two coats of oil bound distemper on wall/ceiling surfaces over a coat of primer and using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by pain manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and as directed.

M&L for complete removal of existing treatment (OBD/oil paint/white wash etc) by scrapping with mechanical wall sander on wall/ceiling (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint.removal of nails etc & filling cracks/hole & windows/doors jambs repair in good shape by skilled labourand M&L for two coats of oil bound distemper over and including waterproof putty @ 1 Kg (undiluted) per sqm of average thickeness 1 mm over and including primer the plastered/old painted wall/ceiling after scrapping to prepare the surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step - 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step - 2) Applying the first coat the prepared mixer with the help of fully autometic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a miximum pressure 3300 PSI Step - 3) Allow 6-8 hrs time to dry the putty surface.

M&L for preparation of old plastered surfaces of wall (plastered or unplastered) thereafter filling of holes and cracks with wall care putty to obtain an even and smooth wall surface and applying one coat of white wash alongwith including scaffolding arrangement, trestles, ladders complete all as specified and as directed.

M&L for preparation of old plastered surfaces of ceiling thereafter filling of holes and cracks with wall care putty to obtain an even and smooth wall surface and applying one coat of white wash alongwith including scaffolding arrangement, trestles, ladders complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel & steel based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for complete removal of existing treatment (OBD/oil paint/white wash etc) by scrapping with mechanical wall sander on wall/ceiling (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint.removal of nails etc & filling cracks/hole & windows/doors jambs repair in good shape by skilled labourand M&L for two coats of exterior Apex Suprema Emulsion or equivalent as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6sqm/ltr including waterproof putty @ 2 Kg (undiluted) per sqm of average thickeness 2 mm over and including primer the plastered/old painted wall/ceiling after scrapping to prepare the surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step - 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step - 2) Applying the first coat the prepared mixer with the help of fully autometic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a miximum pressure 3300 PSI Step - 3) Allow 6-8 hrs time to dry the putty surface.

S & F in repair for 18 mm thick wood plastic composites (WPC) board for kitchen cabinets, partitions, cupboards and similar work 100% solid with density not less than 650 Kg per cubic meter , both side white finished laminated for inner surfaces and one side decorative finished surface on exposed/external surface , fixed with screws fitted under or above the kitchen cooking platform and/or other platform, in Cupboards or below counter top washbasins including all necessary fittings and fixtures and steel soft closing heavy type telescopic drawers channel etc wherever required and dismantling existing boarding complete all as specified and directed. Note : (a) Pattern & design of WPC board to be decided by GE.