PETTY REPAIRS AND DAY TO DAY COMPLAINS OF OTM ACCN EXCEPT MH, AMC UNIT AND SS VIHAR MD ACCN UNDER AGE B/R-I OF GE (EAST) JALANDHAR CANTT

Amount

Demolition of cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specially provided for sunken floor complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.

Material and labour brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:6) complete all as specified and directed.

All as per Srl item No. 4.00 here-in-before but except brick

Material and labour for brick work with old size sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removing surplus spoil out of defence land where directed complete all as specified.

Dismantling structural steel work including door, gates but excluding framed truss etc complete all as specified.

Material and labour 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in sub floors, sub base etc.; concrete surfaces finished fair and even and prepared to receive floor finish complete all as specified & directed.

Material and labour 40mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring in patches n. exc. 3 Sqm in each patch finished even and smooth (without using extra cement) complete all as specified and directed.

Material and labour 18 to 20mm thick machine cut Kota stone in flooring laid over and including 15mm thick screed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the colour of stone slab including rubbing and polishing complete all as specified and directed.

Material and labour 18 to 20mm thick machine cut Kota stone as in vertical surfaces, risers of steps, skirting, dado and pillars etc laid over and including 10mm thick rendering in cement mortar (1:4) jointed with grey cement slurry mixed with pigment to match the colour of stone slab including rubbing and polishing complete all as specified and directed.

Material and labour Udaipur green stone slab 18 to 20mm thick glazed (table rubbed and polished) fixed as in cooking plate form, floor and the like set in cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match with & including screed bed or bedding layer of mortar 15mm thick in cement mortar (1:4) for laying floor finishes complete all as specified and directed.

Material and labour Granite (of any type) work 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, hand wash places and like including necessary cutting and grooving to walls and making good including 15mm thick in cement mortar (1:6) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite complete all as specified and directed.

Material and labour glazed ceramic coloured tiles of size 450 x 300 x 7mm thick as on vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface laid over and including 10mm thick rendering in cement mortar (1:4) to receive tiles complete all as specified and directed.

Material and labour non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.06 Sqm but not exceeding 0.11 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

Material and labour non skid ceramic coloured tiles 6 to 7mm thick (Square or rectangular) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

Material and labour vitrified ceramic tiles 8 to 10mm thick, dark shade as approved, polished area of each tiles n. exc. 0.36 Sqm (square/ rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour vitrified ceramic tiles 8 to 10mm thick, any shade as approved, polished area of each tiles n.exc. 0.36 Sqm (square/ rectangular) in vertical surfaces such as skirting/ dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including rendering 10mm thick in cement mortar (1:4) complete all as specified and directed.

Material and labour for rendering 15mm thick cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 15mm thick cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour 5mm thick cement plaster on ceiling in cement mortar 1:3 including finishing the surface even & smooth complete all as specified and directed.

Material and labour for preparation of new plastered or un-plastered surfaces of wall and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty complete all as specified and directed.

Material and labour for preparation of new plastered surface of walls and applying three coats of white washing complete all as specified and directed.

Material and labour for preparation of new plastered surface of ceiling and applying three coats of white washing complete all as specified and directed.

Material and labour preparation of newly plastered or unplastered surface of walls including cornices, pillasters etc. and applying two coats of cement base paint complete all as specified and directed.

Material and labour for preparation of old surfaces of walls including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc. on plastered or un-plastered surfaces and applying one coat of white wash complete all as specified.

All as per Srl item No. 27.00 here-in-before but one coat of oil bound distemper

All as per Srl item No. 27.00 here-in-before but ceiling

Material and labour for preparation of old decorated surfaces of walls and applying one coat of cement base paint complete all as specified & directed.

Material and labour 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection, laid in panels including finishing the concrete surface even & smooth without using extra cement complete all as specified & directed.

Material and labour 60mm thick coloured reflective type machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-35 grade, with grey cement and pigment, laid in floor/ path/ hardstandings in any pattern as approved, laid over and including 25mm thick sand cushion and interstices filled with sand using plate vibrator complete all as specified and directed.

Material and labour PCC (1:3:6) type B-2 using 40mm graded crushed stone aggregate as in surface channels and drains without using extra cement etc complete all as specified and directed

Dismantling of brick tiles single layer as in roof covering all as specified and directed.

Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

Wire brushing and cleaning top surface of cement concrete, including flashing and junction of parapets etc complete all as specified and directed

Material and labour for brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.

Material and labour plain cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in foundations, filling and mass concrete, roof padding etc. (average thickness 50mm) complete all as specified and directed.

Material and labour for applying a coat of hot blown paving industrial bitumen 85/25 at the rate of 1.20 kg/ sqm over a coat of primer @ 0.3 litre per sqm over the roof suface including cleaning surfaces complete all as specified and directed.

Material and labour for APP based polymeric membrane minimum weighing 3kg/ sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/ sqm) laid on primed surface by forced application complete all as specified complete all as specified and directed.

Material and labour brick tile terracing with 40mm thick brick tiles laid over and including 15mm thick screed in cement mortar (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement including flush pointing in cement mortar (1:3) as separate operation complete all as specified and directed.

All as per Ser item No 41.00 above but except brick tiles.

Material and labour for flush pointing to brick terracing tiles in cement mortar (1:3) complete all as specified and directed.

Material and labour cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3) complete all as specified and directed.

Material and labour 15mm thick rendering in cement plaster on brick or concrete surfaces in cement mortar (1:3) in two layer of 10mm & 5mm mixed with integral water proofing compound @ 3% by weight of cement in top 5mm thick finishing the surfaces with even and smooth with using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and directed.

Material and labour applying two coats of bitumen blown grade, applied hot in to concrete surfaces @ 1.5 Kg/sqm per coat and laying 50 micron thick black polythene film as in floors complete all as specified and directed.

Material and labour lean concrete (1:7:12) type F-2 using 40mm graded stone aggregate complete all as specified and directed

Material and labour PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in coved fillet at junction of roof & parapet wall and other vertical surfaces 75mm radius and surface painted with a hot paving bitumen grade 30/40 conforming to IS-73 @ 0.70 Kg/Sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr/ Sqm complete all as specified & directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n. exc. 1.5 Sqm each door/ window complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc. 1.5 Sqm but n. exc. 4 sqm each door/ window complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm and n. exc. 2 sqm complete all as specified and directed.

Taking down shutters area exc. 1 sqm but n. exc. 2 sqm and refixing in the same opening after easing and adjusting and making the door closing properly including refixing builder's hardware complete all as specified and directed.

Re-securing or easing and adjusting without taking down shutters of any description, area exc. 1 Sqm and n. exc. 2 sqm each complete all as specified and directed.

Material and labour 35mm thick factory made plain framed, paneled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of veneered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Material and labour for 2nd class hard wood factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.

Supply and fixing in repairs 2nd class hard wood plain fillets; square or rectangular or triangular in section, clean sawn, planed on both sides secured with nails or beads, sectional area exc. 3 sqcm and n. exc. 6 sqcm duly painted with one coat of synthetic enamel paint over a coat of pink wood primer complete all as specified and directed.

Supply and fixing in repair 2nd class hard wood plain fillets. Square or rectangular or triangular in section and bull-nosed, splayed, chamfered or rounded on one edge or face, clean sawn, planed on both sides secured with nails or beads , sectional area exc 13 Sqcm and not exc 25 Sqcm, including two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Supply and fixing factory made 25mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including 25 x 6mm thick 2nd class hard wood lipping on edge complete all as specified and directed.

Material and labour 18/ 19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work in cupboard shutters complete all as specified and directed.

Supply and fixing 6mm thick plywood, grade BWR type BB (No. of ply 5) fixed with screw to timber framework as in shutters, shelves etc. including taking out existing plywood complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fixing continuous (piano) hinges 30mm width of flaps, mild steel, bright finish or electro galvanized with cupboard or drawers complete all as specified and directed

Material and labour stainless steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

Material and labour in repair stainless steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

Supply and fixing Prayag Syment butt hinges 100mm long all as specified and directed.

Supply and fixing in repairs Prayag Syment butt hinges 100mm long all as specified and directed.

Supply and fixing Prayag Syment tower bolt 200mm long all as specified and directed.

Supply and fixing in repairs Prayag Syment tower bolt 200mm long all as specified and directed.

Supply and fixing Prayag Syment bow handle 125mm long all as specified and directed.

Supply and fixing in repairs Prayag Syment bow handle 125mm long all as specified and directed.

Material and labour mild steel sliding door bolts 300mm long stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Material and labour in repair mild steel sliding door bolts 300mm long stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Supply and fixing 100mm size mild steel butt hinges medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply and fixing in repair 100mm size mild steel butt hinges medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply and fixing 75mm size mild steel butt hinges medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply and fixing in repair 75mm size mild steel butt hinges medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply and fixing mild steel barrel tower bolt 200mm long stove enameled black with bright bolt and fixed complete all as specified and directed.

Supply and fixing in repairs mild steel barrel tower bolt 200mm long stove enameled black with bright bolt and fixed complete all as specified and directed.

Supply and fixing mild steel pressed handles, oval type, stove enameled black 125mm size complete all as specified and directed.

Supply and fixing in repair mild steel pressed handles, oval type, stove enameled black 125mm size complete all as specified and directed.

Supply and fixing in repair mild steel handle left or right side for window duly painted with black Japan paint complete all as specified and directed.

Supply and fixing mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate welded to steel frame/ screwed to wooden frame complete all as specified and directed.

Supply and fixing in repairs mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate welded to steel frame/ screwed to wooden frame complete all as specified and directed.

Supply and fixing aluminium anodised, barrel tower bolts of extruded section and fixed, 150mm long all as specified and directed.

Supply and fixing in repairs aluminium anodised, barrel tower bolts of extruded section and fixed, 150mm long all as specified and directed.

Supply and fixing floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 150mm complete all as specified and directed.

Supply and fixing in repairs floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 150mm complete all as specified and directed.

Supply and fixing 100mm size hasp and staple, extruded aluminium alloy, fabricated type anodised including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fixing in repairs 100mm size hasp and staple, extruded aluminium alloy, fabricated type anodised including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fixing extruded aluminium alloy handles, fabricated type, anodised, 100mm size, all as specified and directed.

Supply and fixing in repair extruded aluminium alloy handles, fabricated type, anodised, 100mm size, all as specified and directed.

Supply and fixing in repairs 20mm dia curtain rails mild steel chromium plated with fixing brackets fixed in cup boards complete all as specified and directed.

Material and labour 25mm dia mild steel pipe curtain rod with PVC coating fixed in MS hooks and finials/ brackets on both ends fixed in repairs complete all as specified and directed.

Material and labour mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-410 Gde-E-250 complete including drilled for fixing of steel sheeting or other covering; doors, door frame chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed.

Supply and fixing 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed

Supply and fixing in repair steel window/ ventilator 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed skeleton shutter ERW sec 50mm x 20mm and 1mm thick with two openable leaf consisting two Nos sash bars of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four Nos for each window) including following fittings welded to frame shutter:- (a) Hold fast, 150mm long of 12mm x 3mm made to shape-04 Nos per window. (b) Handle of z section 20mm x 25mm, 100mm long 01 Nos per leaf. (c) MS tower bolt 150mm long- 2 Nos per leaf. (d) z section 20mm x 25mm, 100mm long stopper - 01 No per leaf. (e) MS pintal hinges of size 75mm x 12mm- 2 Nos per leaf. (f) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07. Note: Grill/ flat iron and glass panes/ wire mesh shall be measured and paid separately under respective item of this BOQ.

All as per ser item No. 98.00 but gauged shutters without sash bars.

Supply and fixing mild steel framed work for such as guard bars/ grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door, railings and similar work complete conforming to Fe-290 Gde E 165 including one shop coat of zinc chromate primer complete all as specified & directed.

Material and labour hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and directed.

Material and labour 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc. 0.50 sqm in each pane complete all as specified and directed.

Material and labour 3mm thick figured glass, pin head type and glazing with oil putty in squares n. exc. 0.5 sqm in each pane complete all as specified and directed.

Material and labour for securing glass of any description in existing wooden/ steel frames glazed with putty/ bends including removing loose or decayed putty/ beads, painting/ oiling one coat on rebates, grooves, reputting and painting/ oiling to match existing work (new length of frames reputtied shall be measured) complete all as specified

Material and labour for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Material and labour 15mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.

Material and labour 20mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.

Material and labour refixing old tubing 15mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and directed.

Material and labour refixing old tubing 20mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and directed.

Cleaning of air lock in GI pipe and making the water supply available upto water taps including rectifying defects in water supply lines complete all as specified.

Supply and fixing rotational moulded polye-thylene water storage tanks, 500 litre capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, fixed in repairs complete all as specified & directed.

Supply and fixing rotational moulded polye-thylene water storage tanks, 1000 litre capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, fixed in repairs complete all as specified & directed.

Supply and fixing 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed.

Supply and fixing 15mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed.

Supply and fixing in repairs 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed.

Supply and fixing in repairs 15mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed.

Supply and fixing in repair 15mm bore body bib cock (Foam Flow) with flange, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

Supply and fixing in repair pillar tap, cast copper alloy chromium plated, with capstan heads, 15mm bore dia of pipe screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

Supply and fixing in repair 15mm angle/ stop valves, fancy type chromium plated, screwed down, high pressure with crutch or butterfly handle screwed at two right angles ends for both iron pipe complete all as specified and directed.

Supply and fixing in repair brass chromium plated shower rose of 125mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and directed.

Supply and fixing sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 125mm wide with chromium plated bracket guards and railing 60cm long complete all as specified and directed.

Supply and fixing glass corner shelf (with bracket) (as approved) complete all as specified and directed

Supply and fixing in repairs towel rail 20mm dia, D type, 600mm long between flanges fixed complete all as specified and directed.

Supply and fixing in repairs flush pipe of polyethylene of low or high density or PVC 32mm dia for low level cistern complete all as specified and directed.

Repair to floor trap around internal surface upto water seal with white cement to prevent seepage from floor/ wall/ void/ joints including taking down and providing new CP hinge grating 125 mm dia circular complete all as specified and directed.

Supply and fixing PVC (SWR) multi floor trap with grating including jointing solvent cement 75mm dia of outlet fixed in repairs complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc., including cleaning for refixing or removal to store complete all as specified.

Supply and fixing 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall, laid in trenches or in floors complete all as specified and directed.

Supply and fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

Supply and fixing PVC (SWR) junction single (Single ‘T’) 75mm bore all as specified and directed.

Supply and fixing PVC (SWR) junction single (Single ‘T’) 110mm bore all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 110mm bore all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 75mm bore all as specified and directed.

Supply and fixing PVC (SWR) vent cowl 110mm bore all as specified and directed.

Supply and fixing PVC (SWR) vent cowl 75mm bore all as specified and directed.

Supply and fixing PVC (SWR) ‘P' trap 110mm bore all as specified and directed.

Supply and fixing 75mm bore PVC (SWR) branch piece, single (single ‘Y’) equal or unequal with rubber rings joints fixed to wall complete all as specified and directed.

Supply and fixing 110mm bore PVC (SWR) branch piece, single (single ‘Y’) equal or unequal with rubber rings joints fixed to wall complete all as specified and directed.

Dismantling 75/100mm bore cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified.

Supply and fixing cast iron soil, waste and vent pipes of size 100mm in any length with or without ears, with cement joints, laid in trenches or in floors fixed to wall complete all as specified and directed

Supply and fixing cast iron soil, waste and vent pipes of size 75mm in any length with or without ears, with cement joints, laid in trenches or in floors fixed to wall complete all as specified and directed

Supply and fixing 75mm bore cast iron vent cowls complete all as specified and directed.

Supply and fixing cast iron branch pipes, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches for 100mm bore pipe fitted with oval access doors complete all as specified and directed.

Supply and fixing cast iron branch pipes, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches for 75mm bore pipe fitted with oval access doors complete all as specified and directed.

Supply and fixing cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) for 100mm bore pipe complete all as specified and directed.

Supply and fixing cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) for 75mm bore pipe complete all as specified and directed.

Material and labour cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n.exc 10cm girth in brick walls complete all as specified and directed.

Supply and fixing in repair sink without drainage board made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 550mm x 450mm bowl size 500mm x 400mm x 160mm (minimum) including PVC waste pipe complete all as specified and directed.

Supply and fixing in repair sinks with drainage board made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, including PVC waste pipe complete all as specified and directed.

Supply and fixing in repairs 32mm dia waste coupling of PTMT (half or full threaded), (minimum weight 45 gms) complete all as specified and directed.

Supply and fixing in repairs stainless steel plate rack made of 0.50mm thick of over all size 920mm x 785mm x 255mm and weight not less than 8 kg each of approved quality complete all as specified and directed.

Supply and fixing in repair mild steel angle iron bracket for WHB and kitchen sinks including making good to existing surface (size of angle 35 x 35 x 5mm thick) complete all as specified and directed.

Supply and fixing in repairs new flexible PVC waste pipe of approved quality 32mm bore, 75cm long with one end socketed fixed to waste coupling inlcuidng one PVC reducer 32mm complete all as specified and directed

Supply and fixing PVC connection 15mm bore size with PTMT nuts of length 450mm complete all as specified and directed.

Supply and fixing in repair steel peg stay 250mm long black Japan fixed with screw or welded if required complete all as specified and directed.

Supply and fixing in repair MS peg set of 6 chromium plated 45cm long fixed with MS screws complete all as specified and directed.

Supply and fixing in repair mild steel CP grating 125mm dia circular shaped and fixing with cement mortar (1:3) on Nahani Trap or floor trap complete all as specified and directed.

Supply and fixing in repair mild steel CP grating 125mm dia circular shaped with centre hole and fixing with cement mortar (1:3) on Nahani Trap or floor trap complete all as specified and directed.

Supply and fixing in repair vitreous china squatting pan Orissa pattern size 580 x 440mm white with front or back inlet, integral foot rest (excluding flushing cistern and flush pipe) fixed including provision of lime concrete bedding etc complete all as specified and directed.

Supply and fixing vitreous china white wash down water closet pan (Pedestal Pattern) with trap and fixing bolts (excluding flushing cistern and flush pipe) inlcuding connection to drain (or outgoin pipe) and to flushing pipe, anti-syphonage pipe, etc. and making good to floor/ distrubed surfaces including dismantling the existing unserviceable water closet complete all as specified and directed

Supply and fixing in repair white plastic water closet seat cover for water closet pan (Pedestal Pattern), closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fixing PVC white low level flushing cistern 10 litre capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, PVC short bend etc. fixed on existing brackets fixed in repairs complete all as specified and directed.

Supply and fixing vitreous china wash hand basin, white, flat back 550 x 400mm excluding taps, waste chain and plug and porcelain stopper fixed on existing brackets complete all as specified and directed.

Supply and fixing chromium plated health faucet for EWC with 1 m long CP tube with CP wall hook superior quality complete all as specified and directed.

Supply and fixing PVC cover of water tank capacity 500 litre complete all as specified and directed.

Material and labour dis-connecting existing PVC tank of capacity exc. 250 litre but n. exc. 500 litre, setting aside (or lowering, if required) for repairs, cleaning and hoisting, re-connecting and re-fixing in position including making connections complete all as specified and directed.

Material and labour for grubbing up bushes or trees trunk of girth n. exc. 10cm including cutting of tree/bushes grown in/over walls, digging out roots and making good the disturbed portion of wall with PCC (1:3:6) type C-1 using 20mm graded stone aggregate including matching the same complete all as specified & directed.

Material and labour for grubbing up bushes or trees trunk of girth n. exc. 10cm including cutting of tree/bushes grown in/over roof, digging out roots and making good the disturbed portion of roof tiles n. exc. 1 sqm with tiles including matching the same complete all as specified & directed.

Material and labour petty repair to existing built in steel cup board, locks, hinges including necessary welding and making the lock/ steel cup boards complete serviceable all as per existing pattern as directed including provision of new keys complete all as specified and directed.

Material and labour petty repairs to existing steel window by welding hinges or removing the steel window shutters from the frame and re-fixing after making it serviceable complete all as specified and directed.

Material and labour petty repairs to PVC door shutter by making minor adjustment to hinges etc easing of shutter including taking down of shutter if required complete all as specified and directed.

Material and labour petty repair to leaking high/ low level flushing cistern including adjustment in the internal fittings, repairs to PVC bends pipe etc all as per directed by Engineer-in-Charge.

Material and labour petty repair to leaking PVC/ brass tap/ stop cock of any type/ size with replacement of washer/ jumper valve etc. complete all as specified and directed.

Material and labour welding in repairs not exceeding 2.5cm in length & thickness of metal to be welded n. exc. 6mm complete all as specified including Material and labour.

Material and labour welding in repairs exc. 2.5cm but n. exc. 5cm in length & thickness of metal to be welded not exceeding 6mm complete all as specified including Material and labour.

JAGDISH KUMAR SEHGAL

FRIENDS ENGINEERS

M/S Vinod Kumar

KAMALJIT SINGH CONTRACTOR

M/s Sanjiv Kumar

S S BUILDERS

Manjeet Singh Contractor

Vee Vee Enterprises

Dee Kay EnterPrises

JAGDISH SINGH AND CO

KULDEEP SINGH