Tender for the work of erection of new 200 KVA DTC along with associated UG cable for releasing 88.96 KW load to the Principal, Govt College of Arts Science and commerce , sankhali Goa , in the jurisdiction of S.O Sankhali , under SD II,Sankhali.

Cost of Material

Supply , Testing and erection of 11KV/433V ,100KVA outdoor type oil immersed aluminium would level II Distribution Transformer.

Supply, laying, Testing & commissioning of 11KV, 3 core 300sq.mm A2XFY Aluminium Armoured XLPE Cable through conventional open trenching method in any type of soil including hard laterite.

Supply, laying, Testing & commissioning of 11KV, 3 core 95sq.mm A2XFY Aluminium Armoured XLPE Cable through conventional open trenching method in any type of soil including hard laterite.

Supply, Erection, Testing & Commissioning of of 11 KV Termination kit indoor 3 core 300 sqmm XLPE

Supply, Erection, Testing & Commissioning of of 11 KV Termination kit Outdoor 3 core 300 sqmm XLPE

Supply, Erection, Testing & Commissioning of of 11 KV Termination kit indoor 3 core 95 sqmm XLPE

Supply, Erection, Testing & Commissioning of of 11 KV Termination kit Outdoor 3 core 95 sqmm XLPE

11KV, 630 Amps, outdoor , SF6 Ring main unit with Two load break switches and one circuit breaker.

Supply and Errection of Earthing complete with 40mm GI pipe, 2.5 mts long along with Batonite complete with brick masonary.

Supply & Erection of HDGI flat of size 25mm x 5mm for earthing.

Supply & Erection of MS Distribution box along with MCCB 400 A, Bus bar made out of Aluminium strips 40 x 10 mm, kit kat fuses for 4 feeder arrangement

Supply and laying of unarmoured 1core 300sqmm XLPE power cable to be laid from transformer to Disribution Box

Supply & stringing of 3 ½ Core XLPE Armoured cable, 1.1KV Grade 185 mm²

Supply & Erection of Enamelled danger boards 11000 Volts,250mm x 200mmm

Supply & Erection of Aluminium crimping Lugs shall as amended upto date. Lugs shall be made of aluminium of grade suitable for aluminium cable fo sizes 300 Sq.mm.

Supply & Erection of DTC metering unit

Supply & Erection of 4g Modem for automatic reading

Supply & laying of protective cover of size 480 mm x 250 mm x 50 mm (+/- 2 mm) and concrete grade shall be M30 adhering to IS 456:2000 and shall have a minimum crushing strength of 30 N/mm2 (28 days strenght) when tested

Bricks class design 75 kg/cm2 (1st class wire cut)

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 1 sq.m. on plan) including dressing of side and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m.

Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: All works upto plinth level

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement.

Providing and laying in position (1:11/2:3) Reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand: 3 graded stone agg 20mm nominal size) All works upto plinth level

Centering & shuttering including Strutting, Propping & removal of forms for: Foundations, Footings, Bases for columns

Providing TMT steel reinforcement bars of (SAIL, TATA, VIZAG, JSW Steel Ltd.))(Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in allthe floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint. In R.S. joists, channels, angles, tees

Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint. In flats of all sizes

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.

12mm cement plaster 1:4 (1 cement : 4 coarse sand)

Painting three or more coats of arcyllic exterior paints of approved brand and manufacture (such as weather shield, APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete

Providing and fixing G.I. chain link mesh 6.35cm x 6.35 cm x 10 gauge (2.5” x 2.5” x 10 gauge) fixed with angle iron posts and struts by G.I. or M.S. staples at 20cms apart with welding with the iron posts (placed at 3 meters centre to centre) including providing barbed wire stiffeners (shall weigh 9.33 kg. per 100 meters minimum) at top and bottom with barbed wire stiffers by binding wires at 50cms centre to centre complete as per the direction of the Engineer – in – charge (angle iron posts struts, earthwork and concrete for fencing posts and struts to be paid separately)

Supply and spreading of 40 mm/20 mm of basaltic stone aggregates in the swichyard.

Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete.

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.

Cost of Erection

Supply , Testing and erection of 11KV/433V ,100KVA outdoor type oil immersed aluminium would level II Distribution Transformer.

Supply, laying, Testing & commissioning of 11KV, 3 core 300sq.mm A2XFY Aluminium Armoured XLPE Cable through conventional open trenching method in any type of soil including hard laterite.

Supply, laying, Testing & commissioning of 11KV, 3 core 95sq.mm A2XFY Aluminium Armoured XLPE Cable through conventional open trenching method in any type of soil including hard laterite.

Supply, Erection, Testing & Commissioning of of 11 KV Termination kit indoor 3 core 300 sqmm XLPE

Supply, Erection, Testing & Commissioning of of 11 KV Termination kit Outdoor 3 core 300 sqmm XLPE

Supply, Erection, Testing & Commissioning of of 11 KV Termination kit indoor 3 core 95 sqmm XLPE

Supply, Erection, Testing & Commissioning of of 11 KV Termination kit Outdoor 3 core 95 sqmm XLPE

11KV, 630 Amps, outdoor , SF6 Ring main unit with Two load break switches and one circuit breaker.

Supply and Errection of Earthing complete with 40mm GI pipe, 2.5 mts long along with Batonite complete with brick masonary.

Supply & Erection of HDGI flat of size 25mm x 5mm for earthing.

Supply & Erection of MS Distribution box along with MCCB 400 A, Bus bar made out of Aluminium strips 40 x 10 mm, kit kat fuses for 4 feeder arrangement

Supply and laying of unarmoured 1core 300sqmm XLPE power cable to be laid from transformer to Disribution Box

Supply & stringing of 3 ½ Core XLPE Armoured cable, 1.1KV Grade 185 mm²

Supply & Erection of Aluminium crimping Lugs shall as amended upto date. Lugs shall be made of aluminium of grade suitable for aluminium cable fo sizes 300 Sq.mm.

Supply & Erection of DTC metering unit

Supply & laying of protective cover of size 480 mm x 250 mm x 50 mm (+/- 2 mm) and concrete grade shall be M30 adhering to IS 456:2000 and shall have a minimum crushing strength of 30 N/mm2 (28 days strenght) when tested

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in :b) All types of Ordinary rock including all types of laterite rock, blasting prohibited

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.Deduct for RCC slab

Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete.a) Sand