Refurbishment of interior works in 2nd and 3rd floor at Assam Water Centre for the office space of EAP Cell (WRD) and PMTC

Amount

EAP CELL

Providing and fixing wall paneling. The work will also include all cost for creation of niches for installation of every AV equipment and electrical fittings wherever required. The veneer and polished shade and finished will be as per consultant. The cost will include all accessories or any material which may be required to complete the work as per specifications, drawings and as directed by the consultant, Framing: Framework consisting 25x50x1.5mm thk Extruded Alum Section, Base Material: 12mm BWP & Termite Resistant Plywood ,DOUBLE SIDE , 1. ADDL,CHIEF ENGINEER ,2.SUPERINTENDING ENGINEER , 3. EXECUTIVE ENGINEER -02 ,4.ASST.EXECUTIVE ENGINEER - 04,5. ASST,.ENGINEER - 04,6. OFFICERS STAFF - 05

Providing and fixing finishing material to existing dry wall partition / wall panelling. The work will also include all cost for creation of niches for installation of AV equipments and electrical fittings wherever required. The veneer and polish shade and finish will be as per consultant/engineer. The cost will include all accessories or any material which may be required to complete the work as per specification, drawings and as directed by the consultant/engineer.1.5 mm laminate + 6 mm plywood duly polished including cost of all consumables

GLASS PARTITION & GLASS PARTITION DOOR

Providing & Fixing toughened glass partitions including all accessories, like patch panles, etc complete in all respect as per tender specifications & as directed by the consultant, Glass Partitions - 12mm

Glass door with SS Handle, Floor Spring & Lock -12mm

GODREJ LOCKS FOR FLUSH DOOR

Glass Itching or Stickers at Glass Partitions

ELECTRICAL

Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) complete

Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Supplying, installation, testing and Commission of following luminaries complete with all accessories such as ballast,drivers, starter etc. mounting with necessary support with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the consultant 18w LED PANEL LIGHT

Supplying, installation, testing and Commission of following luminaries complete with all accessories such as ballast,drivers, starter etc. mounting with necessary support with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the consultant 18w LED PANEL LIGHT With 3 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Supplying including and fixing of following metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR(AVE),MK (BLENZE),SCHNEIDER(ZENSELO),CRABTREE(MURANO) or equivalent make as approved by the Deptt in surface/recessed system complete as per direction of department

3 module type Metal

6 module type Metal

Supplying with fitting and fixing single pole 10KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved specified and directed by the deptt. 6 to 32 A

False Ceiling

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). 12.5mm thick -

WALL PUTTY AND PAINT

Providing two coats of J.K Wall Putty or equivalent make as approved by the Deptt. ( White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm)

Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac or equivalent make as approved by the Deptt. ) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac or equivalent make as approved by the Deptt.)

NETWORKING

Network Swithch 24 Port Supply, Installation, testing & commissioning of L2- switch :24 GigE chassis with 24xRJ-45 10/100/1000BaseT, 2xSFP/RJ-45 10/100/1000BaseT or 100/1000BaseX combo ports. 1U by 1/2 rack form factor, internal AC power with country power cord, fanless. Mount kits and rubber tabletop feet order separate.

Patch Panel Supply, Installation, testing & commissioning of Accessories :24 port loaded patch pannel

Patch Cord 1 Mtr Cat-6 Patch Cord 1Mtr. (Required for connecting Switch & Patch Panel)

Supply, Installation, testing & commissioning of I/O : I/O module including MS box and face plate

CAT-6 Cable Supply, Installation, testing & commissioning of Cables: Supply and fixing of cat-6 cables including conduit and wall cutting

Network Swithch 24 Port PoE Supply, Installation, testing & commissioning of L2- switch :24 GigE chassis with 24xRJ-45 10/100/1000BaseT, 2xSFP/RJ-45 10/100/1000BaseT or 100/1000BaseX combo ports. 1U by 1/2 rack form factor, internal AC power with country power cord, fanless. Mount kits and rubber tabletop feet order separate.

VERTICAL GARDEN,CARPET GRASS, EXTRA GLASS PARTITION DOOR & FLUSH DOOR,

Vertical Garden Make- Super Grass/Equivalent

Carpet Grass Make- Super Grass/Equivalent

Dismantling Bricks works and creating window opening at Control Room providing Fixed Glass Window of size 1800 x 1200 size with 6mm thick glazing fixed to Aluminums section of appropriate size.

GLASS MAIN DOOR (12MM) THICK

FURNITURES

L-shaped arrangement of rectangular worktops of overall dimension 3750mm L1 x 2850mm L2 x 600mm D as per the layout approved by the consultant

U-shaped arrangement of rectangular worktops of overall dimension 3000mm L1 x 3000mm L2 x 4650mm L3 x 600mm D as per the layout approved by the consultant

WINDOW BLINDS

Providing and fixing of manual Roller Blinds comprising of Sunscreen fabric (Basket Weave) with Openness factor 5% having composition of 22% Polyester and 78% PVC of weight 475gsm±5% & thickness 0.68mm±5% and having fire resistance standard – DIN(4102) & BS Test,B2 & BF 5867 part2(Type B) Tensile strength (Warp 170N±10%, Weft 125N±10% as per ISO 544674). Color fastness 6-7/8 (ISO 105 B02-1994) Xenon Arc Lamp. The control clutch drive unit engineered heavy duty chain drive pulley operating system consisting of gear clutch housing and locking plug containing minimum 6 ribs and inserted at minimum of 37mm into roller tube. It is self lubricating Exclusive clutch with safety pins for secure bracket installation and unlocking pin for quick manual removal. Universal clutch is most convenient for large windows down to the smallest windows. It shall be driven by a ball chain pulley with ball chain and can be positioned at Right hand or Left hand side of the shade. Clutch gear ration 1.75:1 for reduced operating force on larger blinds. Tube bearing plug idler Exclusive self lubricating spring loaded plastic bearing end plug with positive locking wheel allows for adjustment and provides for a secure installation and removal of shade. Tube bearing plug contain minimum 6 ribs and inserted a minimum of 37mm into roller tube. Mounting hardware brackets universal brackets including end plug bracket with lock down retainer device. Brackets finish of powder coated metal installation brackets made of stamped and hardened steel with 46mm projection for wall, ceiling and side fitting with screws and end cap covers. Roller tube circular-shaped aluminum tube extruded from alloy 6060 and temper T66 – EN755 of 37mm inside diameter and outside diameter 40.2mm extruded tube to have a 1.6mm wall thickness with standard anodized natural finish. Heavily reinforced with minimum six internal ribs providing additional tensile strength and allows for secure placements of clutch and end plug. Bottom rail flat-shaped extruded aluminum from alloy 6060 and temper T66 – EN755 of dimension 13mm * 30mm and wall thickness of 1.5mm and weight of 390g/m. Rail standard finish of powder coat white color and provided cover. Ball chain shall be 2mm diameter cord with 4.5mm diameter acetal balls molded coaxially to it on 11.8mm pitch to form an endless ball chain. It is used for raising or lowering action of the shades. Plastic parts all plastic components are UV-stable compounds available white colour.

Providing and fixing wall paneling. The work will also include all cost for creation of niches for installation of every AV equipment and electrical fittings wherever required. The veneer and polished shade and finished will be as per consultant. The cost will include all accessories or any material which may be required to complete the work as per specifications, drawings and as directed by the consultant. Framing: Framework consisting 25x50x1.5mm thk Extruded Alum Section, Base Material: 12mm BWP & Termite Resistant Plywood , DOUBLE SIDE ,1. GLASS CABIN - 01 ,2.CUBICLE - 01 ,3.WORKSTATION - 04,4.DISCUSSION ROOM - 01

Providing and fixing finishing material to existing dry wall partition / wall panelling. The work will also include all cost for creation of niches for installation of AV equipments and electrical fittings wherever required. The veneer and polish shade and finish will be as per consultant/engineer. The cost will include all accessories or any material which may be required to complete the work as per specification, drawings and as directed by the consultant/engineer. 1.5 mm laminate + 6 mm plywood duly polished including cost of all consumables

GLASS PARTITION & GLASS PARTITION DOOR

Providing & Fixing toughened glass partitions including all accessories, like patch panles, etc complete in all respect as per tender specifications & as directed by the consultant, Glass Partitions - 12mm

Glass door with SS Handle, Floor Spring & Lock -12mm

GODREJ LOCKS FOR FLUSH DOOR

Glass Itching or Stickers at Glass Partitions

ELECTRICAL

Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) complete

Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Wiring for circuit wiring with PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS 694 :1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 Volts (Finolex/RR Kabel/Nicco/Anchor or Equivalent make as approved by Deptt). in surface/recessed PVC conduit (Berlia/AKG/Precision/Presto plast/polycab/MW or equivalent make as approved by the Deptt) wiring system

With 3 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Supplying including and fixing of following metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR(AVE),MK (BLENZE),SCHNEIDER(ZENSELO),CRABTREE(MURANO) or equivalent make as approved by the Deptt in surface/recessed system complete as per direction of depar

3 module type Metal

6 module type Metal

Supplying with fitting and fixing single Pole 10KA 240/415V50 Hz MCB of the following capacity complete with making necessary connection as approved specified and directed by the deptt 6 to 32A

False Ceiling

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). . 12.5mm thick -

WALL PUTTY AND PAINT

Providing two coats of J.K Wall Putty or equivalent make as approved by the Deptt. ( White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm)

Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac or equivalent make as approved by the Deptt. ) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.(a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac or equivalent make as approved by the Deptt.)

NETWORKING

Network Swithch 24 Port Supply, Installation, testing & commissioning of L2- switch :24 GigE chassis with 24xRJ-45 10/100/1000BaseT, 2xSFP/RJ-45 10/100/1000BaseT or 100/1000BaseX combo ports. 1U by 1/2 rack form factor, internal AC power with country power cord, fanless. Mount kits and rubber tabletop feet order separate.

Patch Panel Supply, Installation, testing & commissioning of Accessories :24 port loaded patch pannel

Patch Cord 1 Mtr Cat-6 Patch Cord 1Mtr. (Required for connecting Switch & Patch Panel)

Supply, Installation, testing & commissioning of I/O : I/O module including MS box and face plate

CAT-6 Cable Supply, Installation, testing & commissioning of Cables: Supply and fixing of cat-6 cables including conduit and wall cutting

Network Swithch 24 Port PoE Supply, Installation, testing & commissioning of L2- switch :24 GigE chassis with 24xRJ-45 10/100/1000BaseT, 2xSFP/RJ-45 10/100/1000BaseT or 100/1000BaseX combo ports. 1U by 1/2 rack form factor, internal AC power with country power cord, fanless. Mount kits and rubber tabletop feet order separate.

FURNITURES

construction and manufacturing of Conference table built by 19 mm BWP and finished with PU Polish

Contingency

ADITI CONSTRUCTION CO.

DREAMZ IMPEX

Wembley Interior Pvt. Ltd.

EASTERN ENVO PROTECT.

Karabi Bora Devi