Loading
Loading…
Loading…
Tender Value
₹75.4 L
EMD Value
₹1.5 L
Closing Date
10 Sept 2026, 11:00 am
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TENDER
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Definition of Similar Nature of Work: Works of wiring/cabling or installation and commissioning of electrical items (other than on coaches) such as lights, fans, pumps, charging arrangements. earthing etc (with or without supply of items/equipment's) for 230 Volts, 1 phase or 415V, 3 phase system or higher voltages.
27 conditions · 3 needing a document upload
Uploading of Scanned copy of Statement of Bank details, PAN & GST.
Compliance with Public Procurement (Preference to Make inIndia) Policy: This tender complies with Public Procurement(Preference to Make in India), Order 2017-Revision dated19.07.2024 of Department of Promotion of Industry and InternalTrade, Ministry of Commerce and Industry, Govt. of India (hereinreferred to as PP-PIM), circulated vide Ministry of Railways(Railway Board)'s letter No.2020/RS(G)/779/2/Pt.1 (E3322671)dated 20.08.2024, and all its amendments. Only Class-I localsuppliers (as defined in PP-PIM) shall be eligible to bid for list ofitems specified in Ministry of Railways (Railway Board)'s letterno.2025/RS(G)/779/3 (E3488356) dated 02.05.2025. For otheritems, only Class-I and Class-II local suppliers are eligible to bid.At the time of bidding, each bidder is required to indicatepercentage of local content (as defined in PP- PIM) and provideself-certification that the item offered meets the local contentrequirement for "Class-I local supplier"/"Class-II local supplier",as the case may be. If this self-certification is not submitted, thebid will be summarily rejected. For contracts above Rs.10 crores,the provisions of Para 9(c) of PP-PIM shall be additionallyapplicable. For the purposes of this NIT, the "local content" (asdefined in PP-PIM) requirement to categorize a supplier as"Class-I local supplier" is minimum 50% and for "Class-II localsupplier" is minimum 20%. Also, the Margin of PurchasePreference (as defined in PP-PIM) is 20%. The procedure forpreference to Make in India shall be as specified in PP-PIM.Uploading of self-certificate for meeting the local contentrequirement for "Class-I local supplier"/"Class-II local supplier",as the case may be (proforma attached). Non- submission of thiscertificate will lead to summary rejection of bid. ( Click here to download Format)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
MYS-Construction of First-floor Building at new OPD Block and Improvements to Circulating area including compound wall of Railway Hospital at Mysuru
Y-E-29-2026-27-76~SWR
Y-E-29-2026-27-76
Open
Works - General
120 Days
Dharwad, Karnataka
₹0
₹1.5 L
19 Aug 2026
19 Aug 2026
27 Aug 2026
101 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 75,42,820.21 | ||
| — | 150.00 | — | — | ||
| Platform surface/concrete cutting for excavation of cable trench 300 mm wide x 300 deep, re-fitting of soil and re-plastering of excavated trench with cement on the PF's to bring original shape. | — | — | — | 1,12,198.5 | |
| — | 100.00 | — | — | ||
| Supply of LTUG Cable with Alu conductor, XLPE insulated and armoured, 4 x 16 sq mm as per IS-7098 part -1 or latest. | — | — | — | 10,500 | |
| — | 150.00 | — | — | ||
| Supply of LTUG Cable with Alu conductor, XLPE insulated and armoured, 4 x 35 sq mm as per IS-7098 part -1 or latest. | — | — | — | 37,500 | |
| — | 250.00 | — | — | ||
| Laying of 4 x 10 - 35 Sq mm LTUG cable with aluminum conductor including end terminations at both ends. This work includes Extension of power supply from the nearest power supply source in the excavated cable trench/in trough/on building walls/sheds/shelters etc. | — | — | — | 3,457.5 | |
| — | 150.00 | — | — | ||
| Supply of LTUG Cable with Alu conductor, XLPE insulated and armoured, 4 x 70 sq mm as per IS-7098 part -1 or latest. | — | — | — | 51,153 | |
| — | 550.00 | — | — | ||
| Laying of 4 x 50-240 Sq mm LTUG cable with aluminum conductor including end terminations at both ends. This work includes Extension of power supply from the nearest power supply source in the excavated cable trench/in trough/on building walls/sheds/shelters etc. | — | — | — | 12,287 | |
| — | 250.00 | — | — | ||
| Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of above 95 sq mm and Up to 185 sq. mm size direct in ground including excavation and refilling the trench etc. as required, but excluding sand cushioning and protective covering. | — | — | — | 74,500 | |
| — | 270.00 | — | — | ||
| Supply of HDPE pipe of dia 75 mm grade PE-100 with pressure of PN 6 for safety of cables. | — | — | — | 37,800 | |
| — | 270.00 | — | — | ||
| Laying of HDPE Pipe of dia 75 mm grade PE-100 with pressure of PN 6 for safety of cables and all the ends should be sealing with bituminous compound. | — | — | — | 3,547.8 | |
| — | 36.00 | — | — | ||
| Supply and Fixing of GI pipe of dia 50 mm. for cable rising & protection including clamping, fixing arrangements and sealing with bituminous compound. | — | — | — | 29,088.36 | |
| — | 250.00 | — | — | ||
| Supplying and fixing suitable size GI / PVC box with modular plate and cover in front on surface / recess / concealed, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. / casing & capping as per site requirement. | — | — | — | 1,36,250 | |
| — | 80.00 | — | — | ||
| Supplying and fixing suitable size GI / PVC box with modular plate and cover in front on surface / recess / concealed, including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. / casing & capping as per site requirement. | — | — | — | 52,720 | |
| — | 10.00 | — | — | ||
| Supply, fixing and commissioning of 200 mm size BLDC Ventilating fan complete including hardware items as required complete. | — | — | — | 17,516.1 | |
| — | 28.00 | — | — | ||
| Supply of BLDC ceiling fan 26 W, BEE 5 star rated with remote 1200 mm size with warranty for 5 years suitable to work for 230 V, 50 HZ single phase supply as per specifications complete. | — | — | — | 66,990 | |
| — | 28.00 | — | — | ||
| Freight, Fixing and commissioning of BLDC ceiling fans 1200 mm size including hook and hardware items as required complete. | — | — | — | 3,127.6 | |
| — | 6.00 | — | — | ||
| Supply and fixing of 6 W LED mirror light fitting, lamp and with driver suitable use on 230 V, 50 Hz AC supply. | — | — | — | 10,356 | |
| — | 56.00 | — | — | ||
| Supply of LED modular down light 2'x2', 36 W, surface type fitting all as per detailed specification. | — | — | — | 2,64,600 | |
| — | 56.00 | — | — | ||
| Freight, Fixing, testing and commissioning of LED fitting complete with suitable accessories. | — | — | — | 6,097.84 | |
| — | 20.00 | — | — | ||
| Supply and fixing of LED modular down light 1' x 1', 22 - 34 W, recess or surface type as per site requirements including all necessary fixing arrangements complete all as per detailed specification and as per PCEE/SWR specifications. | — | — | — | 58,378.4 | |
| — | 25.00 | — | — | ||
| Supply and provision of 20 Watts/3000 Lumens LED light fixtures type surface 8 similar to corvi surface 8 or similar specifications including all other necessary accessories complete. | — | — | — | 22,137.5 | |
| — | 60.00 | — | — | ||
| Supply, fixing, testing and commissioning of 18 - 22-watt 6500k batten 4 feet approximate length LED lighting fixture as per specification SWR/LED LIGHT FITTING (Indoor/outdoor)/001-2016 effective from 18.04.2016 or latest. Including all other required accessories complete. | — | — | — | 40,860 | |
| — | 12.00 | — | — | ||
| Supply, fixing, testing and commissioning of 45-Watt LED street lights, as per specification SWR/LED LIGHT FITTING (Indoor/outdoor)/001-2016 effective from 18.04.2016 or latest. | — | — | — | 24,883.68 | |
| — | 300.00 | — | — | ||
| Wiring for circuit/ sub main wiring along with earth wire with the 2 X 6 sq. mm + 1 X 6 sq. mm earth wire sizes of FRLSH / HFFR PVC insulated copper conductor, single core cable in surface / concealed medium class PVC conduit / casing & capping as required at site. | — | — | — | 1,44,600 | |
| — | 600.00 | — | — | ||
| Wiring for circuit/ sub main wiring along with earth wire with the 2 X 4 sq. mm + 1 X 4 sq. mm earth wire sizes of FRLSH / HFFR PVC insulated copper conductor, single core cable in surface / concealed medium class PVC conduit / casing & capping as required at site. | — | — | — | 2,23,800 | |
| — | 900.00 | — | — | ||
| Wiring for circuit/ sub main wiring along with earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire sizes of FRLSH / HFFR PVC insulated copper conductor, single core cable in surface / concealed medium class PVC conduit / casing & capping as required at site. | — | — | — | 2,79,900 | |
| — | 180.00 | — | — | ||
| Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH / HFFR PVC insulated copper conductor single core cable in surface / Concealed medium class PVC conduit / Casing & capping, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLSH / HFFR PVC insulated copper conductor single core cable etc. as required. (Group - C). | — | — | — | 3,06,720 | |
| — | 1.00 | — | — | ||
| Design, Supply, fixing and commissioning of 12 Way DP Double Door Distribution Board Similar to M/s Havells with following switchgears (All 'C' Series) incomer 40 A DP RCCB sensitivity 30 mA-1 Nos and outgoing SP MCB 6-32A 10 KA - 10 Nos with required suitable hardware and internal wiring complete. | — | — | — | 10,127.63 | |
| — | 2.00 | — | — | ||
| Design, Supply, fixing and commissioning of 12 Way FP Double Door Distribution Board Similar to M/s Havells with following switchgears (All 'C' Series) incoming 100A FP RCCB sensitivity 30 mA-1 Nos and outgoing TP MCB 63 A - 2 No., SP MCB 6-32A - 16 No's along with TP+N SPD - 1 No. with required suitable hardware and internal wiring complete. | — | — | — | 61,107.48 | |
| — | 2.00 | — | — | ||
| Design, Supply, fixing and commissioning of 12 Way FP Double Door Distribution Board Similar to M/s Havells with following switchgears (All 'C' Series) 63 A FP RCCB sensitivity 30 mA-1 Nos, TP MCB 40A - 2 No and SP MCB 6-32A - 16 Nos with required suitable hardware and internal wiring complete. | — | — | — | 50,554.62 | |
| — | 8.00 | — | — | ||
| L.T. Earthing arrangements for hard soil using 50 mm C-Class GI Pipe- 2.7 Mtr length, soil treatment by spreading of 25 kgs each of salt and charcoal, duly painting earth pit with black paint and stenciling of earth resistance value with date, including supply and laying of 6 SWG G.I. wire and other hardware to connect equipment at site complete. | — | — | — | 43,488 | |
| — | 48.00 | — | — | ||
| Supply and provision of 18 W dual USB Mobile charging sockets similar to Anchor Roma. | — | — | — | 24,240.96 | |
| — | 16.00 | — | — | ||
| Supply and provision of AC operated call bell for 10-meter range. | — | — | — | 7,987.36 | |
| — | 10.00 | — | — | ||
| Supply, erection, testing and commissioning of occupancy sensor. | — | — | — | 25,711 | |
| — | 9.00 | — | — | ||
| Supply, erection, testing and commissioning of Full colour RGB LED sign board indoor lighting type suitable to show "ENGAGE" in RED colour. | — | — | — | 11,616.39 | |
| — | 1.00 | — | — | ||
| Supply, erection, testing and commissioning of Potable water purification system with inbuilt water cooler. RO + UV + Copper as per Detailed Description/ Specification. | — | — | — | 1,09,530 | |
| — | 2.00 | — | — | ||
| Supply, fixing, testing and commissioning of Electric Water Heater - Geyser (Stationary Storage Type Electric Water Heaters), Tank Capacity - 15 Liters as per Detailed description/ Specification with suitable water pipes and all other required hardware items complete. | — | — | — | 13,480 | |
| — | 2.00 | — | — | ||
| Additions/alterations of interconnectivity of power supply, LTUG Cables for outgoing Feeders at LT panel board, fixing and mounting work etc. Shifting of old panels (the tenderer shall consult and obtain permission from Railway Engineers before commencement of work each step/occasion). | — | — | — | 3,424.38 | |
| — | 1.00 | — | — | ||
| Liaison work with EB officials in getting Power supply - making Agreement; Commissioning work exclusive of EB Deposit work. | — | — | — | 6,530.39 | |
| — | 1.00 | — | — | ||
| Supply, installation, testing and commissioning of Compact Pre - fabricated Packaged 250 KVA Sub - Station 11 KV / 433V consisting of 3 way SF6/VCB insulated compact RMU, oil cooled CRGO/Amorphous Core Star-2 rated (5-star) Transformer and LT section with one MCCB/ACB as incoming and following outgoing MCCB feeders and with enclosure made of Galvanized steel sheet (min 2 mm Thickness) with powder coated finish, Cu bus bar with LT Metering facility 250kVA Al. Wound Transformer, 400A MCCB 50kA 4 pole fixed type microprocessor based for LT incomer and 3 Nos. 250A MCCB 4 pole 36kA TM Based for outgoing including cable duct, suitable RCC plinth and GI strip earth connection complete. | — | — | — | 20,97,147.07 | |
| — | 1.00 | — | — | ||
| Supply, installation, testing and commissioning of APFC panel of 100 KVAR rating with all other required accessories complete as per detailed specifications. | — | — | — | 2,23,975.09 | |
| — | 1.00 | — | — | ||
| Supply, fixing and commissioning of FP 4 Way Double Door Distribution Board with following switch gears (All 'C' Series) FP 63 A RCCB having sensitivity 300 mA 10KA Short circuit capacity-1 Nos, FP MCB 63 A-1 Nos, SP MCB 16A-2 Nos, SP MCB 6 A-1 No. with required suitable hardware and internal wiring complete. | — | — | — | 19,818.06 | |
| — | 50.00 | — | — | ||
| Supply, fixing and commissioning of DLP-S-U- PVC trunking of size 100X 50 mm including accessories like bends, elbows, junction box etc. similar to M/s LEGRAND cat No. 638038. | — | — | — | 47,965 | |
| — | 24.00 | — | — | ||
| Supply and laying of 25X5mm G.I. strip including connection/ terminating with all accessories like saddles, clamps, G.I nut, bolt, spring, washer etc. as required to provide earth continuity from earth pit to lift well. | — | — | — | 4,111.2 | |
| — | 50.00 | — | — | ||
| Supplying and installing 100mm width X 50 mm depth X 1.6 mm thickness size of perforated hot dipped galvanized iron cable tray (galvanization thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I suspenders including G.I bolts & nuts, etc. as required. | — | — | — | 39,847 | |
| — | 4.00 | — | — | ||
| Supply, assembly, fixing and commissioning of 3 Phase 4 wire Bus bar Chamber - 100 Amps capacity 4 Way Similar to M/s. Havells, SAP Code-IHBC006304 or similar specifications. | — | — | — | 30,787.92 | |
| — | 2.00 | — | — | ||
| Additions/alterations of interconnectivity of power supply, LTUG cable for outgoing feeders at PF LT panel board, fixing and mounting work etc., {The tenderer shall be consult and obtain permission with Rly., Engineers before commencement of work each step/occasion}. | — | — | — | 3,424.38 | |
| — | 50.00 | — | — | ||
| Supply, installation, testing and Commissioning of on grid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended and as per tender conditions, consisting of Topcon or latest solar PV modules as per site requirement, net metering facility, necessary protections, earthing, mounted on GI structure of suitable strength with following components complete as required:- a) Solar Photovoltaic Module of capacity 330Wp or above, manufactured in India, conforming to IS14286/IEC61215, IS/IEC61730- Part-1, IS/IEC61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/systems must be warranted for their output peak watt capacity, which should not be less than 90%at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 350- 800VDC Input voltage range and 400VAC, three phase, 4 wire, 50Hz +/- 2.5Hz, output voltage suitable to generate AC Power with efficiency not less than 97% total harmonic distortion less than and 3% and suitable for ambient temperature from 0 to 50-degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories. d) Fixing of Array junction box & Main junction box with IP65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying &fixing of necessary channel/conduit lugs and other accessories etc. | — | — | — | 22,50,977 | |
| — | 2.00 | — | — | ||
| Supply, installation, testing and commissioning of Air Source Heat pump with hot water circulation Pump and stand. Similar to Make: Neo Heat Pump, Model: NEO280, 280 / 280LPH with Power Input: 2.8 KW, Output: 11.2 KW, 3 Ph, 415 volts, 50 Hz and all other as per detailed specifications complete including all necessary connected accessories. | — | — | — | 2,60,000 | |
| — | 2.00 | — | — | ||
| Supply, installation, testing and commissioning of 500 LTR Capacity Pressurized Tank, 4 mm Shell and 4 mm Dish Thickness, puff insulated Tank, Max test 5 bar, Max Working pressure 4 bar, Vertical Tank. | — | — | — | 1,10,000 | |
| — | 2.00 | — | — | ||
| Supply, installation, testing and commissioning of Solar System to Tank to Heat Pump to Tank Inlet / Outlet plumbing materials Charges. | — | — | — | 56,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCApril-2022.pdf
ATTACHMENT
JPOintenderdocumnets.pdf
ATTACHMENT
Advance Correction Slip 12 to GCC
ATTACHMENT
Tender Booklet
ATTACHMENT
AdvanceCorrectionSlips1-11toGCC-2022.pdf
ATTACHMENT
AdvanceCorrectionSlips12toGCC-2022_compressed.pdf
ATTACHMENT
TB-ConstructionofNEWOPDblockatMYSRailwayHospita.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].