REPAIR REWINDING OF CEILING FAN WALL MOUNTING FAN AIR CIRCULATOR SPARE OF GEYSER AND REPAIR AND MAINTENANCE OF FIRE FIGHTING INSTALLATION AND FIRE INSTALLATION AND FIRE AIARM DETECTION UNDER CVRDE AVADI

Amount

Taking down ceiling fans of any make and sweep from any height of the building after disconnecting connections and fixing back in position connecting up complete after carrying out repair etc all as specified and directed. Note M&L for Repair/ replacement of parts shall be measured & paid separately under relevant items.

Dismantling of ceiling fan 1200/1400mm sweep of any make and taking out existing burnt winding and rewinding the motor with the super enamelled copper wire of existing size/gauge including providing of insulating material, bearing, bush and greasing varnishing and properly packing of winding, assembling and testing complete all as specified and directed.

Supply and fix in repair fan condensor 1.6 to 2.5mfd 230/440V range 50Hz complete all as speciefed and directed.

Supply and fix in repair top and bottom canopy set of ceiling fan complete all as specified and directed.

Supply and fix down rod of 36Inch length 15mm dia made out of GI/mild steel pipe/ERW suitable for ceiling fan of any make with incl hanging clamps, real rubber with nut and bolt at top, split pins at bottom all as specified and directed

M & L for preparation surfaces of ceiling fan complete including fan blades, clamps and hanging rod etc by scraping existing paint care fully and applying two coats of spray painting with synthetic enamel paint including filling cavities with filler coat after cleaning of dust etc including writing the MES No with black paint of existing size and greasing all as directed by Engineer-in-charge.

Taking down exhaust fans of any make and sweep from any height of the building after disconnecting connections and fixing back in position connecting up complete after carrying out repair etc all as specified and directed. Note M&L for Repair/ replacement of parts shall be measured & paid separately under relevant items.

Dismantling of exhaust fan, 300 mm sweep of any make, taking out existing burnt winding and rewinding the motor with super enamelled copper wire of existing size/gauge, bearing including provision of insulating material, varnishing and properly baking of winding, re-assembling and testing complete all as specified and directed.

Dismantling of exhaust fan, 350 / 380mm sweep of any make, taking out existing burnt winding and rewinding the motor with super enameled copper wire of existing size/gauge, bearing including provision of insulating material, varnishing and properly baking of winding, re-assembling and testing complete all as specified and directed.

Dismantling of exhaust fan, 450 / 600 mm sweep of any make, taking out existing burnt winding and rewinding the motor with super enameled copper wire of existing size/gauge, bearing including provision of insulating material, varnishing and properly baking of winding, re-assembling and testing complete all as specified and directed.

Material & labour for replacement of condenser 4 MFD including connection for exhaust fan of any make and sweep all as directed by Engineer-in-charge.

S&F in replacement of exhaust fan blade made out of MS sheet (as per existing shape and size) complete all as directed

S & F of canopy of motor (back cover) made out of MS sheet of 1.6mm thick including stainless steel screws, suitable for exhaust fan of 300/350/380/450mm sweep of any make complete all as specified directed.

M & L for preparation of surface of exhaust fan of any make and sweep complete including body, blades, legs etc by scraping of existing paint carefully, filling cavities with filler coat after cleaning of dust etc and applying two coats of spray painting with synthetic enamel paint of colour as approved including writing the MES No/ Srl No with black paint all as directed.

M & L for replacement of louver suitable for up to 450 mm sweep exhaust fan complete all as specified and directed.

Taking down air circulator fans of any make and sweep from any height of the building after disconnecting connections and fixing back in position connecting up complete after carrying out repair etc all as specified and directed. Note M&L for Repair/ replacement of parts shall be measured & paid separately under relevant items.

M&L of wall mounted air circulator of 400/600mm sweep, burnt winding and rewinding the motor with super enameled copper wire of existing size/gauge including providing bearing insulating material, varnishing and properly baking of winding, assembling and testing the same for full speed up to the entire satisfaction of Engineer-in-charge.

Supply and fixing in replacement of flexible PVC insulated copper conductor cable, twin core of size 23/.0076 for connecting lead from ceiling rose to condenser/connectors complete all as specified and directed by Engr-in-Charge.

Supply and fix Hose box made of 18 gauge MS Sheet 750mm X 600mm X 250mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside yard and including taking down u/s hose box complete all as specified and directed.

Supply and fix gun metal, branch pipe as per ISI-903 with ISI marking with 63 mm dia inlet and 19mm dia out let, all as per fire standards complete all as specified and directed.

Supply and fix of 63 mm dia reinforced rubber-lined hose conforming to IS:636 with ISI marking and binded with gun metal male coupling on one side and female couling on other side with copper wire and revets, all as per fire standards of two pieces of 15 mtrs each complete all as specified and directed.

S&f in hydrant valve single headed with ISI mark 63mm including taking down old valve complete all as specified and directed.

S&F MS Hose reel drum swivel type with ISI mark 30 meter length of thermoplastic 19mm ID hose and fitted with gun metal shut off nozzle including taking down old drum complete all as specified and directed

S&F in replacement of 4inch dian 0-14Kg rating complete all as specified and complete all as specified and directed.

Supply and fix in replacement of pressure switch universal type complete all as specified and directed.

S&F in replacement of flow switch 80mm complete all as specified and directed.

S&F in replacement of flow switch 100mm complete all as specified and directed.

S&F in replacement of flow switch 150mm complete all as specified and directed.

S&F in replacement of 3run of 1.5sqmm PVC Insulated copper conductor on exxisting pvc conduit complete all as speciefed and directed.

S&F in replacement of Detectors Complying with and type certified to EN - 45 Addressable type smoke detector Photoelectric /Optical with base with self built intelligence as per IS: 11360 complete all as specified and directed

S&F in replacement of Detectors Complying with and type certified to EN - 45 addressable type multisensor detector with smoke and heat combination Photoelectric /Optical with base with self built intelligence as per IS: 11360 complete all as specified and directed

S&F in replacement of annunciating devices of addressable control module complete all as specified and directed.

S&F in replacement of addressable manual call point resettable type complete all as specified and directed.

S&F in replacement of addresseble monitor module complete all as specified and directed.

S&F in replacement of lopp powered hooters complete all as specified and directed

S&F in replacement of Fire Alarm Sounders / Sirens Electronic type horizontal single stage continous normal operation for atleast 50 minutes with sound level 65 DB to 120 DB measured at 1.5 Mtr with sound output variation of + 5 DB 500mtr range complete all as specified and directed.

S&F in replacement of GI Pipe heavy class 100mm dia complete all as specified and directed.

S&F in replacement of GI Pipe heavy class 150mm dia complete all as specified and directed.

S&F in replacement of GI Pipe heavy class 80mm dia complete all as specified and directed.

Supply and fix replacement of sluice valve 80mm dia class PN 1.6 complete all as specified and directed

Supply and fix replacement of sluice valve 100mm dia class PN 1.6 complete all as specified and directed

Supply and fix replacement of sluice valve 150mm dia class PN 1.6 complete all as specified and directed

M&L for preparation, painting with two coats of synthetic enamel paint over one coat of red oxide primer of all fire fighting panel /LT panel/motor pumpset as per the standard colour coding including painting of fire fighting pipe lines and mark indication aeromark in the fire fighting system complete all as specified and directed.

Excavation in trenches not ecx. 1.5 Mtrs wide and not exc. 1.5 Mtrs deep in any type of soil for laying of fire fighting water mains and pipe lines all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick all as specified.

Removing excavated material not exc. 50 Mtrs and depositing where directed at a level not exc. 1.5 Mtrs above the starting point all as specified.

Supply and fixing in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) Single pole current carrying capacity 6A-32A in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) TP current carrying capacity 25A-63A in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F in replacement o MCCB 4P 100A thermal megnetic release 16KA rating complete all as specified and directed

S&Fin replacement of fire responsive indicator of fire alarm system complete all as specified and directed.

S&F testing of Fire alarm control panel complying with not less than 1 -8 Zone capacity from 125 modules upto 200 detector and modules and including taking down unserviceable panel complete all as specified and directed

S&F testing of addressable Fire alarm control panel complying with not land including taking down unserviceable panel complete all as specified and directed

S&F in replacement of power contactor with 3Pole 415V 18 to 40A range complete all as specified and directed

S&F in replacement of power contactor with 3Pole 415V 63A rating complete all as specified and directed

Checking/repairing existing geyser 25/50 Ltr capacity of any make/type after disconnecting existing water Supply and electric connections including checking serviciablity of geyser, taking out complete internal assembly including geyser inner tank, inlet/outlet assembly, heating element, thermostat etc and descaling the geysers inner tank by chemical, cleaning and washing complete and re-assembling the same and fixed in position including connecting to electric and water Supply system and including providing and grouting new nut bolts and testing of geyser for leakage and its proper functioning complete all as directed. Note :- i) Defects developed during taking down geysers such as breaking of threads of pipe / geysers and GI fittings etc shall be rectified / replaced by the contractor at his own cost.ii) The heating element, thermostat will be measured and paid separately under supply only.

Supply and replacing flexible PVC connection, heavy duty, 450mm long with CP brass adopter and washers at both ends suitable for hot water for 15mm dia pipe all as specified & directed

Supply only thermostat suitable for 25/50 ltr geyser capacity to control water temperature 20 degree C to 80 degree C, ISI marked complete all as specified & directed

Supply only heating element push/thread type with rubber gasket complete of capacity 1.5 KW/2 KW, ISI marked for 25 ltr cap of geyser of any make complete all as specified & directed

M&L for DOL starter suitable415V, 1-5A rating complete all as specified and directed.(For Exhaust fan HD 415V)

Refilling of CO2 gas in the existing CO2 fire fighting cylinders of capacity 4.5 Kg per cylinders complete all as specified and directed by Engineer in charge .Note: Dismantling, transportation and hydro testing for the cylinders by CCE approved gas filling agency are deemed to be included in the quoted rate

Ashwarya Enterprises

BKR Enterprises