Repair/Renovation of existing building including construction of Toilet Block for the office of Sub Registrar Hiranagar.

Amount

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape ranking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground in cement mortar 1:4 (1 cement : 4 fine sand) incl.all leads & lifts.

Dismantling doors, windows and clerestory windows of area 3 sqm and below (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking ,all leads & lifts.

Demolishing brick work in cement mortar manually /by mechanical means including stacking of serviceable material and disposal of unserviceable material ,all leads & lifts complete.

Earth work excavation in all kind of soil by manual means in trenches for foundations, drains, pipes, cables etc. ( Not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5 mtr including disposal/filling of excavated earth all leads and lifts complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering including all leads, lifts and carriage of material by MT / H.L. All work upto plinth level.1 : 5 : 10 (1 cement : 5 coarse sand : 10 graded crushed stone agg. 40 mm nominal size) .

Providing and laying in position cement concrete of specified grade1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size) . excluding the cost of centring and shuttering including all leads, lifts and carriage of material by MT / H.L.- All work upto plinth level.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work upto plinth level. 1:1.5:3 ( 1 cement : 1.5 coarse sand: 3 graded crushed stone aggregate 20 mm nominal size) including all leads, lifts and carriage of material by MT / H.L.

Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size) including all leads, lifts and carriage of material by MT / H.L.

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth including all shapes, leads, lifts and carriage of material by MT / H.L. in cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work in superstructure above plinth level upto floor V level (By manual means) incl. all leads, lifts and carriage of material by M.T. H.L.

Providing and laying Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15° slope. excluding cost of centering and shuttering , all work upto floor V level including all leads, lifts and carriage of material by MT / H.L.

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete Thermo Mechanically Treated bars including all leads, lifts and carriage of material by MT / H.L.

Providing and laying in position cement concrete of specified grade 1:2:4 (1 cement: 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) excluding the cost of centring and shuttering .All work upto plinth level including all leads, lifts and carriage of material by MT / H.L

Centring and shuttering including strutting propping etc and removal of form work for

Foundations, footings, bases of columns etc. for mass concrete

Suspended floors, roofs, landings, balconies and access platform.

Edges of slab and breaks in floors and walls upto 20 cm wide

6 mm thick plaster to ceiling of mix 1 : 3 ( 1 cement : 3 fine sand) incl. all leads, lifts and carriage of material by M.T / H.L.

15mm cement plaster on rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 fine sand) including drip course/groove all leads, lifts and carriage of material by MT / H.L.

Providing and fixing Ist quality ceramic glazed tiles conforming to IS : 13753 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. incl. all leads, lifts and carriage of material by MT / H.L.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% & confirming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand) including grouting the joints with white cement & matching pigments etc. complete Size of tile 60cm x 60cm incl. all leads, lifts and carriage of material by MT / H.L.

Regarding terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster preparing the surface of mud phaska to proper slope, relaying plaster gobri leaping and tiles or bricks grouted in cement mortar 1 : 3 ( 1 cement: 3 fine sand) including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground ( the cost of the new tiles or brick excluded) including all leads and lifts.

Providing gola 75 x 75 mm in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 10mm down gauge) including finishing with cement mortar 1:3 ( 1 cement : 3 fine sand) as per standard design in 75 x 75 mm deep chase incl. all leads, lifts and carriage of material by MT / H.L.

Making Khurras 45 x 45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 ( 1 cement : 2 Coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1 m x 1m x 400 micron, finished with 12 mm cement plaster 1:3 ( 1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges, making and finishing the outlet complete incl. all leads, lifts & carriage of material by MT/ H.L.

Providing & laying 400 micron thick transparent Poly Vinyl Chloride sheet on the roof under mud phaska incl. cutting placing complete job.

Providing wood work in frames of Sal wood in doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately)

Providing and fixing 35mm thick panelled or panelled and glazed shutters of Second class deodar wood for door, windows and clerestory windows including ISI marked black enameled M.S.butt Hinges with necessary screws including Panelling of Particle Board 12mm thick Plain particle board flat pressed, 3 layer (like Novapan, Ecoboard etc)or graded wood particle board (like Bhuttan Board) medium density grade 1, IS : 3087 marked

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick , Particle Board 12 mm thick plain particle board flat pressed, three layer or graded wood particle board medium density grade IS: 3087 marked.

Providing and fixing 30 mm thick wire gauze shutters using galvanised M.S. wire gauze .of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows:lSI marked M.S. pressed but hinges bright finished butt hinges of required size with necessary screws: Second class deodar wood

Providing and fixing 30 mm thick glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float of glass panes including lSI marked M.S. pressed butt·hinges bright finished of required size with necessary screws.

Providing and fixing M.S. grills of required pattern in frames of windows etc with M.S. flats, square or round bars etc all complete fixed to openings/ wooden frames with Rawl plugs screws etc.

Providing & fixing aluminum sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts & screws etc. complete: 300 x 16 mm.

Providing and fixing aluminium tower bolts ISI marked (anodised anodic coating not less than grade AC10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete

Providing and fixing aluminium handles ISI marked (anodised anodic coating not less than grade AC10 as per IS:1868)transparent or dyed to required colour or shade with necessary screws etc complete

Providing and fixing aluminium hanging floor door stopper ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Twin rubber stopper

Providmg and fixing IS: 3564 marked Aluminium extruded section body tubular type universal hydraulic door closer,(having superior brand) embossed on the body,door weight upto 36-80 lg and door width upto 700-1000 mm with double speed adjustment with necessary accessories and screws etc.complete :

Providing & fixing white vitreous china pedestal type Water closet ( European type W.C. pan ) with seat and lid,10 litre low level white P.V.C flushing cistern including flush pipe with manually controlled device( handle lever) conforming to IS : 7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever required. W.C pan with ISI marked white solid plastic seat and lid including all leads, lifts and carriage of material by MT / H.L.

Providing and fixing wash basin White Vitreous China Wash basin size 630 x 450 mm with a pair of 15 mm C.P. brass pillar taps with C.I/M.S. brackets,15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:

Providing and fixing on wall face un- plasticized rigid PVC rain water pipes conforming to IS : 13592 Type -A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion single socketed pipes 110 mm dia.

Providing and fixing on wall face un- plasticized- PVC moulded fittings/accessaries for unplasticised-Rigid PVC rain water pipes conforming to IS : 13592 Type -A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion Bend 87.5* 110 mm bend

Providing and fixing G.I pipes complete with G.I fittings , including trenching and refilling etc.( external work)

15 mm dia nominal bore

20 mm dia nominal bore

Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall 15 mm dia. nominal bore

Providing and fixing G.l. Union in G.l. pipe including cutting and threading the pipe and making long screws etc.complete (new work)

15 mm nominal bore

20 mm nominai bore

Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931. 15 mm nominal bore complete job.

Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standard and weighing not less than 810 gms complete job. 15 mm nominal bore

Providing & fixing ball valve (brass) of approved quailty complete.High or low Pressure with plastic floats15mm nominal bore

Providing and fixing C.P brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931. 15 mm nominal bore complete job.

Providing and fixing PVC Floor trap of approved quality.

Supply and fixing C.P. grating 100 mm dia

Providing and fixing P.V.C waste pipe for sink or wash basin including PVC waste fitting complete semi rigid pipe 32 mm dia

Providing & fixing PTMP towel rail complete with brackets fixed to wooden cleats with C.P brass screws with concealed fittings arrangement of approved quality and colour 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less 170 gms

Providing & Placing on terrace at all floor levels polyethene water storage tank ISI: 12701 marked indicating the BIS No with cover & suitable locking arrangements & making the necessary holes for inlet, outlet & over flow pipes without the fittings & the base support for tank sintex. electroplast, star, lotous or equivalent having ISI make.

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453 x 357 mm

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth incl. necessary repairs to scratches etc. complete.

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work ( hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work.

Wall painting with plastic emulsion paint of approved brand and manufature to give an even shade. Two or more coats on new work.

Dheeraj Gupta

M/S DWARKA NATH GOVT CONTRACTOR

MOHINDER PAUL