Repair/Renovation of Govt. Qtr. no. 13-C at Gandhi Nagar Jammu. CNO-573 NP

providing &fixing of ply 19mm thick ply including cutting wasteage fevicol carriage etc LMR

providing &fixing of ply 6mm thick ply including cutting wasteage fevicol carriage etc complete item of superior make LMR

providing and fixing of 1mm thick sunmica including cutting wastage ,fevicols nails etc.complete (LMR

providing and fixing of 0.85mm thick sunmica including cutting wastage,fevicols nails etc.complete (green,amulya,vigro) LMR

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Second class D- wood : 35mm thick

providing and fixing glazed shutter for doors,windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S pressed butt hinges finished of required size with necessary screws 30 mm second class deodar wood

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class deodar wood : 30mm thick

Extra for using stainless steel grade 304 wire gauge with wire of dia. 0.5 mm instead of Galvanized M.S. Wire gauge with wire of dia. 0.63 mm for doors, windows and clerestory windows with necessary screws: (shutter area to be measured)

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.( 5.3.1)1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in Superstructure including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand)including extra for upto five floor

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand

Renewing glass panes, with wooden fillets wherever necessary Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

"Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)"

steel reinforcement for R.C.C. work including straightening,cutting,bending ,placing in position and binding all complete upto plinth level 5.22.4

10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. With common burnt clay (non modular) brick tiles of class designation 10.0

providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing compound .1st layer of cement slurry,2nd layer of fibre cloth and third layer of cement slurry which allowed to air dried

Centering and shuttering including strutting, propping etc. and removal of form for ROOF SLAB SUSPENDED FLOOR

for lintel beam

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown (Khajaria, Somany double charged)

providing and fixing PVC pipe including / jointing with seal ring (Finolex / Supreme) of pressure @ 5.5 kg/Cm2 for100 mm dia. 4'' DIA PIPE

6'' DIA PIPE

providing and fixing sliding channel

providing and fixing auto hinges

providing and fixing steel pawa 4''

Providing and laying matt finished vitrified tile of specified size having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement: 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as direction of Engineer-in-Charge. 300x300x9.8 mm

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

"Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Khajaria, Somany)"

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Chequerred precast cement concrete tiles 22mm thick in footpath andcourtyard, jointed with neat cement slurry mixed with pigment to matchthe shade of the tiles, including rubbing, cleaning and curing completeon 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse,dark shade using ordinary cement

Providing & fixing 4mm thickness APP superthermoly stp sheet polyester based sheet black finishing( including 2 coats of silver colour paint) with hot torch treatment over RCC /cemented surface by following methods (i)applying with shalitex stp primer for bitumen membrane @0.40 liters/Sqm (ii) Mt. by the 4mm thickness APP superthermoly stp sheet polyester based sheet black finishing manufacturerer of density at@25*C ,0.87-0.89 kg/ liter over primer coated layer shall be laid using butane torch and sealing all the joints longitudinal as well as transverse prepare the surface complete. (iii) cut 1"deep grove above the roof surface on the parapet wall and seal edge of APP superthermoly stp polyester sheet into the groove with polymer modified mortar .(iv)Incase of low height parapets ,terminate APP superthermoly stp polyester sheet over the parapet. (v) For overlapping of joints, rub the polythylene side of membrane by wire brush,apply shali bond APP over the rubbed area ,allow it to the tacky and then fix the bituminous side of APP superthermoly stp sheet polyester with hot application (vi) For longitudinal and transverse joints overlap of 75mm and 100mm respectively is desired. The vital physical and chemical parameter of the membrane shall be as under:- Softening point of membrane not less than 150*C & cold flexibility shall be upto 0*C when tested in accordance with ASTM ,Joint strength in longitudinal amd transverse direction at 23*C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. in 4mm thick , the weight of Roll (40 kg for 1meter by 10 meter) the laying of membrane shall be got done through the certified applicator (certificate need to be attached) (vii) incl single coat of aluminium paint at top complete job as per the direction of E.I.C

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, omplete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing / fixing polycorbonate sheet including wastage of 5mm thick (50 Micron) complete job

"Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works detail: " for drain grating and shed

providing and fixing of PVC panelling on walls 8 to 10 mm thick inc, all fitting and fixtures complete

Providing and fixing of WPC louvers inc. all fitting and fixtures complete as per direction of EIC

Providing and fixing WPC Panelling complete job

providing and fixing wall paper or required colour shade and design of standard make as directed by the EIC

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

p/fixing of flush door of approved make fixed with 1mm mica on both side along with all fitting and locks .

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1MM THICK PUTTY

2MM THICK PUTTY

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

providing and fixing of wall bend mixer of jaquar, cera or essco

providing and fixing central hole basin mixer of jaquar, cera or essco

providing and fixing Short nose bib cock of jaquar, cera or essco

providing and fixing Long nose bib cock of jaquar, cera or essco

providing and fixing Angle valve of jaquar, cera or essco

Single Towel Rail 600mm of jaquar, cera or essco

providing and fixing Towel Ring Square of jaquar, cera or essco

providing and fixing Shower with arm of jaquar, cera or essco

providing and fixing Hand shower of jaquar, cera or essco

providing and fixing Hand Faucet of jaquar, cera or essco

Providing and fixing floor mounted, white vitreous china single piece, of Jaquar essco and Cera eq. brand.

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc.complete

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and fixing toilet paper holder C.P. brass

White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 18.2.1 W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

engaging unskilled labour for clearance of site

carpenter skilled for carrying out repair

engage welder for carrying out repair work at site including charges of welding set with helper

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand)

engage mason

Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters including fixing with necessary screws etc. complete. double strip (Horizontal type)

C.P gratings 4"

Providing and fixing Soap Dish holder

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc.complete

hardware items. SS Handels 12''

SS handels 8''

SS Handels 6"

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 150x10 mm

SS Hinges 3''

SS Hinges 4''

Providing and fixing mortice latch and lock

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 15mm nominal dia pipes

20mm nominal dia pipes

25mm nominal dia pipes

32mm nominal dia pipes

providing and fixing of wooden flooring of specified shade and brand as per direction of engineer in charge including base coat of foam complete job.

Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete :

providing and fixing nickel plated m.s pipe curtain rods ,with nickel plated brackets including fittings 25mm dia

Supply, Installation , commissioning and testing of Auto on/off Pressure Pump 1HP CG tankl 24 Ltr of approved make (Crompton/Kirloskar/Servo/Havells) and specification as approved by engineer in charge incl all fixtures fittings complete Job

engage trolley for shifting of mulba froim site to outer area of municipality

Please Enable Macros to View BoQ information