Construction of Ayurvedic Health Centra Jhumar (SH Construction of Building portion , WS and SI ,Construction of septic Tank and Rain Water Harvesting system)

Amount

Excavation in foundation and trenches in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) and their intermediate classification of soil setting out true to the required lines, grade, width, cutting and trimming of side slopes as shown in the drawing and if water is met within the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailing out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-in-charge and disposal of all surplus excavated soil in acquired width or at an approved dumping side including its stacking leveling dressing including all leads and lifts by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HPPWD specification. Any loss to the public and private property during the course of execution and disposal of unserviceable material shall be absolute responsibility of the contractor which shall have to be compensated by him in all cases. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:6:12 (one cement isto six sand isto twelve graded crushed stone aggregate 40 mm (forty millimetre) nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth including carriage of material, within all leads and lifts within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work of grade M-20 (M-Twenty design mix) to obtain the minimum compressive strength of 20N/square MM (Twenty newton per square millimetre) with cement contents not less than 330 Kg/Per cubic metre ( Three hundred thirty kilograme per cubic metre) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundations, footings bases of columns and the like and mass concrete including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying mechanically mixed & vibrated cement concrete work of grade M-20 (M-Twenty design mix) to obtain the minimum compressive strength of 20N/square MM (Twenty newton per square millimetre) with cement contents not less than 330 Kg/Per cubic metre ( Three hundred twenty kilograme per cubic metre) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landing, shelves and their support, balconies, beams, girders, bressumers and cantilever upto floor all levels as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work of grade M-twenty design mix to obtain the minimum commpressive strength of 20 N /mm² (twenty newton per square millimetre ) cement contents of 330 Kg (three hundred ten kilogram) per cubic metre and curing complete excluding cost of form work and reinforcement for reinforced concrete work in walls ( any thickness but not less than 0.10 (zero point ten) Metre thickness) including attached pilasters buttersses, plinth and string courses etc. from top of foundation upto floor all levels including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals as per HP:PWD specification .The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (uncoursed / brought to courses ) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement isto six sand isto twelve graded stone agreegate 20mm (twenty millimetre) nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand) as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Squared rubble masonry coursed with hard stones of approved quality in foundation and plinth including raking out joints in cement mortar 1:6 (one cement is to six sand) curing complete including all taxes and carriage of material, within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government

Squared rubble masonry coursed with hard stones of approved quality in super structure including raking out joints in cement mortar 1:6 (one cement is to six sand) curing complete including all taxes and carriage of material, within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government

Squared rubble masonry coursed with hard stones of approved quality in foundation and plinth including raking out joints in cement mortar 1:3 (one cement is to three sand) curing complete including all taxes and carriage of material, within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government

Squared rubble masonry coursed with hard stones of approved quality from Ground level to Plinth level including raking out joints in cement mortar 1:5 (one cement is to five sand) curing complete including all taxes and carriage of material, within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government

Second class brick work using common brunt clay building bricks of approved quality in super structure above plinth level upto floor all levels in cement mortar 1:6 (one cement isto six sand) curing complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Half brick masonry using second class common brunt building brick of approved quality in super structure above plinth level upto floor all levels in cement mortar 1:4 (one cement isto four sand) curing complete including and carriage of material, as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing second class deodar wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position complete including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 40 mm (forty millimnetre) thick second class deodar wood panelled, glazed or panelled and glazed shutters for doors, windows, clerestory windows including black enamelled iron butt hinges with necessary screws within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 40 mm (forty millimetre) thick second class deodar wood wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G(eighty five G) with wire of dia 0.56 mm (zero point five six millimetre) for doors, windows and clerestory windows including bright finished black enamelled iron hinges with necessary screws within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing M.S. plain grills of required pattern in wooden frames of windows etc.with M.S.Flats, square or round bars with round headed bolts and nuts or by screws within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in foundation, footing, basis of columns etcetra and mass concrete including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetra upto any thickness including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls upto all width and heights including all taxes, GST, including carriage of material and other incidentals within all leads and lifts and as per the direction of the Engineer-in-charge.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Stair cases with sloping or stepped soffits excluding landing including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor including , carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed design mix M-25 ( Twenty five) grade cement concrete for reinforced cement concrete work, in all work above plinth level up to floor V level using minimum cement content not less than 360 KG/Cum (Three hundred sixty kilogram per cubic metre) including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Steel reinforcement Thermo-Mechanical treated bars of grade Fe-500 of TATA Tiscon/Sail including straightening, cutting, bending, placing in position and binding all complete upto plinth level as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a primming coat of red lead paint in trusses and trussed purlins in building including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Steel work welded in built up sections/ framed work, in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required as per the direction of Engineer-In-charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing corrugated 63 mm ( sixty three millimetre) thick G.I sheet roofing of TATA fixed with galvanised iron J.or L. hooks bolts and nuts 8 mm ( eight millimetre) diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins refters and trusses complete with all accesories as required including all taxes, GST carriage of material within all leads and lifts and as per specification or as per the direction of the engineer-in-chief and other incidentals.The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing ridges or hips 60 cm ( sixty centimetre) over all in plain G.I.sheet of TATA with galvanised iron J or L hooks. bolts and nuts 8mm ( eight millimetre) dia G.I. Limpet and bitumen washers complete with all accesories as required including carriage of material within all leads and lifts and as per specification or as per the direction of the engineer-in-chief and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 300 mm x 200 mm ( three hundred miliimetre into two hundred millimetre) overall semi-circular plain G.I. sheet gutter with iron brackets 40x3mm ( forty into three millimetre) size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.63 mm ( zero point six three) thick with zinc coating not less than 275 gm/m² with iron brackets 40x3mm ( forty into three millimetre) size, bolts, nuts and washers etcetera including making necessary connections with rain water pipes complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 150 mm ( one hundred fifty millimetre diametre) on wall face unplasticised Rigid single socketed PVC rain water pipes of Supreme/ Finolex/ Prince conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre) gap for thermal expansion complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 150 mm ( one hundred fifty millimetre) dia PVC bend of Supreme/ Finolex/ Prince make on wall face unplasticised for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre) gap for thermal expansion complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 150 mm dia (one hundred ten millimetre diametre) PVC clamps of Supreme/Finolex of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 ( fifty into fifty into fifty millimetre) mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 ( one cement isto four coarse sand) and making good the wall etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Stone filling dry hand packed tightly in floor complete including all taxes and carriage of material, as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Precast terrazo tiles 22 mm ( twenty two millimetre) thick of NTC make with graded marble chips of size upto 12 mm, ( twelve millimetre) laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm ( twenty millimetre) thick bed of cement mortar 1:4 ( one cement is to four coarse sand) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing & laying Precast terrazo tiles 22 mm ( twenty two millimetre) thick of NTC make with graded marble chips of sizes upto 12 mm ( twelve millimetre) in skirting and risers of steps not exceeding 30 cm ( thirty centimetre) in height, on 12 mm ( twelve millimetre) thick cement plaster 1:3 ( one cement isto three sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete .The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

White glazed tiles 6mm (six millimetre) thick of Kazaria/Johnson in skiriting or risers of steps and dado on 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) finished with flush pointing in white cement as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

15mm (fifteen millimetre) thick cement plaster in single coat on fair side of brick / concrete / stone walls for interior plastering upto floor all levels including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:6 (one cement isto six sand)as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

15mm (fifteen millimetre) cement plaster in single coat on rough side of brick / concrete / stone masonry for interior plastering upto floor all levels including arises, internal rounded angle, chamfer and / or rounded angle not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement isto six sand) as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

15mm (fifteen millimetre) thick cement plaster in single coat on brick / concrete / stone walls for interior plastering upto floor all levels including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:3 (one cement isto three sand)as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Pointing on square rubble,coursed or un-coursed stone masonry with cement mortar 1:3(1 one cement isto three Sand ) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter with Readymixed paint brushing wood primer pink as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Painting two or more coats of Asian/Nerolac (excluding priming coat ) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stoping with enamel paint other than whiteas directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Applying Birla white/J.K wall care putty over plastered surface after thoroughly brushing the surface free from mortar drops, dust loose materials and other foreign matter sand papered smooth to give final matter finish to the surface complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Distempering two or more coats shade with dry distemper with fevicol mix of shade and approved brand Asian / Dulex manufacture on un-decorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and including preparing the surface complete. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including all taxes, carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

6mm (six millimetre) thick cement plaster to ceiling in cement mortar 1:3 ( one cement isto six sand) as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing & Fixing 8 mm ( eight millimetre) thick partical board ceiling of ACTION TESA/GREENLAM/ VISTA of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental.

Providing and fixing M.S. B.P. sheet 1.66mm (one point six six millimetre) any thickness in eaves board / facia / soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per specification including carriage of material within all leads and lifts and as per the direction of the engineer-in-chief and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Constructing course rubble hammer dressed 'U' shape open surface drain with side wall 15 X 23 cm (fifteen into twenty three centimetre) in cement mortar 1:6 (one cement isto six sand) and inside plastering with cement mortar 1:3 (one cement isto three sand) including earth work and laying 10 cm (ten centimetre) cement concrete in 1:5:10 (one cement isto five sand isto ten graded stone agreegate 40 mm (foty millimetre) nominal size) and 7.5 cm (seven point five centimetre) cement concrete 1:2:4 (one cement isto two sand isto four graded stone agreegate 20 mm (twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard design within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etcetra complete 300 X 16 mm ( three hundred into sixteen millimetre) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 200 X 10 mm (two hundred into ten millimetre) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete 125 mm (one hundred twenty five millimetre) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 150 mm ( one hundred fifty millimetre) dia oxidized M.S. hasps and stapples (safety type) with necessary screws etcetera complete within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing M.S.fan clamp type -1 ( one) of 16 mm ( sixteen millimetre) dia M.S. bar bent to shape with hooked ends in R.C.C slab during laying including painting the exposed portion of loop all as per standard design complete complete within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing under layer for plinth protection of 75 mm (seventy five millimetre) thick (unconsolidated) bed of dry brick / stone agreegate 40 mm (forty millimetre) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing plinth protection 50 mm (fifty millimetre) thick in cement concrete 1:3:6 (one cement isto three sand isto six graded stone agreegate 20 mm(twenty millimetre) nominal size) within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing to wall, ceiling and floor galvanised mild steel tubes (medium grade) tube fittings and clamps including making good the wall, ceiling and floor 20mm (fifteen millimetre) nominal bore within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing to wall, ceiling and floor galvanised mild steel tubes (medium grade) tube fittings and clamps including making good the wall, ceiling and floor 15 mm (fifteen millimetre) nominal bore within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying in trenches galvanised mild steel tubes (medium grade) tube fittings (Earth work in trenches to be measured and paid for separately) 15 mm (fifteen millimetre) nominal bore including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket of supreme make , waste and ventilating pipes ISI marked including fixing with approved adhesive 150 mm (one hundred fifty millimetre) dia as per the directions of the Engineer-in-charge including all taxes carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and laying PVC plain bend of ISI marked including fixing with approved adhesive etc. complete 150 mm (one hundred fifty millimetre) dia as per the directions of the Engineer-in-charge includingall taxes, carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive 110 mm (one hundred ten millimetre) dia as per the directions of the Engineer-in-charge including all taxes, carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing PVC 110x90mm (one hundred ten into ninety millimetre) dia floor trap ISI Marked of self cleaning design including fixing with approved adhsive, cost of cutting making the walls and floors etc. complete including all taxes, carriage of material within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing vitreous China water closet squatting pan (Indian type W.C. pan) ( earth work, bed concrete, foot rest and trap to be measured and paid for separately). Orrisa pattern No. 2004 of size 58x40 cm. of hindware / Cera in white shade as per specification or as per the directions of the Engineer-in-charge including all taxes, carriage of material within all leads and lifts and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing PVC P or S trap for water closet (squatting pan ) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete 150mm (one hundred fifty millimetre) dia as per the directions of the Engineer-in-charge including all taxes, carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing PTMT coloured/ white high density polythene / poly prolylene 10 litre (ten litre) capacity low level P.V.C. cistern plus) flushing cistern with a pair of C.I. or M.S. brackets complete with fitting such as lead valve syphon, 15mm (fifteen millimetre) dia PVC wall valve , coupling for connection with inlet, outlet and overflow pipes 40mm (forty millimetre) dia C.P. flush bend including cutting holes and making good the same (overflow pipe to be measured and paid for separately) as per specification as per the directions of the Engineer-in-charge including all taxes, carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing White vitreous China wash basin of Hindware/Cera / jaquar of star white/ snow white shade with a single hole with CI bracket, 15mm ( fifteen millimetre) CP brass pillar tap, 32mm ( thirty two millimetre) CP brass waste of heavy duty make of ISI marked IS No. 8931 & 8934 standard pattern fitting including painting of fitting and brackets, cutting and making good the walls wherever required as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous China pedestal of Hindware/Cera/jaquar for wash basin complete recessed at the back for wash basin complete recessed at the back for the reception of pipes and fittings as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing stainless steel Kitchen sink of Diamond/ Unik with drain board 510 mm x 1040mm ( five hundred ten millimetre into one thousand forty millimetre) bowl depth 250mm ( two hundred fifty millimetre) of ISI 304 (18/8) as per IS: 13983 with CI brackets and stainless steel plug 40mm( forty millimetre) including painting of fitting and brackets, cutting and making good the walls wherever required or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass waste pipe of 32mm (thirty two millimetre) dia of Supreme size for sink or wash basin.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing M.I union of 32mm (thirty two millimetre) dia size for sink or wash basin as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 100 mm (one hundred millimetre) sand cast Iron grating for gully trap as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 600mm X 450 mm (six hundred millimetre into four hundred fifty millimetre) bevelled edge mirror of superior glass mounted on 6mm (six millimetre)thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 600mm X 20mm (six hundred millimetre into twenty millimetre) C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 600x120x5mm (six hundred into one hundred twenty into five millimetre) glass shelf of Hindware/ Cera/ jaquar with sdges round off supported on anodized aluminium angle frame with C.P. brass brackets and gaurd rail complete fixed with 40mm (forty millimetre) long screws rawl plugs etcetra complete. as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing charomium plated brass soap dish of of Hindware/ Ceral with C.P. brass brackets fixed to wooden cleats with C.P. brass screws as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing C.P. brass bib tap with capstan head of of Hindware/ Cera15 mm (fifteen millimetre) dia with capaston head as per the directions of the Engineer-in-charge including all taxes, carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing C.P. brass pillar tap with capstan head of Hindware/ Cera 15mm (fifteen millimetre) dia.as per the directions of the Engineer-in-charge including all taxes, carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen millimetre) nominal bore C.P. brass stop cock (concealed) of (heavy duty) makes of of Hindware/ Cera ISI marked IS No. 8931 & 8934 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 20mm ( twenty millimetre) nominal bore C.P. brass stop cock (concealed) of (heavy duty) makes of of Hindware/ Cera ISI marked IS No. 8931 & 8934 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass angle valve 15mm (fifteen millimetre) dia.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing PVC connection with brass union 45cm. (forty five centimetre) Long and 15mm (fifteen millimetre) dia as per the directions of the Engineer-in-charge including all taxes, carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing brass full way valve with wheel 15mm (fifteen millimetre) nominal bore as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Construting manhole with RCC top slab in 1:2:4 ( one cement isto two sand isto four graded stone aggregate) 20mm (twenty millimetre nominal size) ,foudnation concrete 1:4:8 (one cement isto four sand isto eight graded stone aggregate 40mm (forty millimetre nominal size) in side plastering 15mm (fifteen milliemtre) thick with cement mortar 1:3 (one cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (one cement isto two sand isto four grade stone aggregate 20mm (twenty millimetre)nominal size finished smooth complete including curing and testing having inside size 800mmx800mm (eight hundred millimeter into eight hundred millimeter) and 500mm (five hundred millimetre) deep including C.I. cover with frame (light duty single seal pattern one) 455mm x610mm (four hunded fifty five millimetre into six hundred ten millimetre) internal dimension total weight of cover and frame to be not less than 38 kg (thirty eight kilogram )weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg (fifteen kilogram) with 23cm. thick brick wall of approved quality in cement mortar 1:3 (one cement isto three sand) as per the directions of the Engineer-in-charge including all taxes, carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and placing in position 1000 (one thousand) litres net capacity PVC water storage tank of sintex ISI 12701 marked G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangment including hoisting upto all heights above ground level.as per the directions of the Engineer-in-charge including all taxes carriage of material within all leads and lifts and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing in position water lifting pump (toollu pump) having 1.00 (one) horse power capacity of Kirloskar or equivilent make ISI mark including all necessary fitting required at site complee in all respect including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals .The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and placing in position 500 (five hundred ) litres net capacity PVC water storage tank of sintex ISI 12701 marked G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangment including hoisting upto all heights above ground level.as per the directions of the Engineer-in-charge including all taxes carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Darshan Kumar

ROHIT KASHYAP

MANESHWAR SINGH

VINAY THAKUR