construction Gow Sadan at Dutt Nagar Badrash in Tehsil Rampur District Shimla

Amount

Excavation in in soil, ordinary rock and hard rock in hilly areas by mechanical means including cutting and trimming of side slopes and disposing the of excavated earth with a lift upto 1.50 metres and lead up to 20.0 Metres. as required as per the direction of Engineer-in-charge.

Soil work @ 40% of total quantity

Ordinary rock @ 30 % of total quantity

Hard rock @ 30 % of total quantity

Earth work in excavation of foundation trenches lift up to 1.50 metres stacking the excated earth up to 50.0 Metres lead dressing the sides and bottom. as required as per the direction of Engineer-in-charge.

Providing and laying cement concrete 1:6:12 (1 cement:6 sand : 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in: Foundation and plinth: as required as per the direction of Engineer-in-charge.

Random rubble masonry/polygonal rubble masonry (Uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 Sand : 12 Graded stone aggregate 20mm nominal size) in cement mortar 1:6 (1 cement:6 sand) in breast walls and retaining walls. as required as per the direction of Engineer-in-charge.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint. In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like. as required as per the direction of Engineer-in-charge.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint. bars,ladders,railling,brackets and similar works.as required as per the direction of Engineer-in-charge.

Supplying and fixing wovenplains G.I. wire fencing of mesh 50mm to 150mm to any type of standard rails, strainging bolts. etc. including provision of binding wire, staples etc. as required as per the direction of Engineer-in-charge.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.

Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm lugs 10 cm.long embedded in cement concrete blocks 15 cmx10cmx10cm size of 1:3:6(1 cement:3 sand:6 graded stone aggregate 20mm nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint. as required as per the direction of Engineer-in-charge.

Providing stone soling of hand packed kharonja stone.

Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished with a floating coat of neat Cement. 13310101 40 mm thick. sqm. 55.70 182.70

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work as required as per the direction of Engineer-in-charge.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like. 0805020100 Floors etc.upto 200mm. in thickness.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like.

Providing and laying cement concrete 1:2:4 (1 cement:2 Sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in: Foundation and plinth as required as per the direction of Engineer-in-charge.

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level : Tor Steel as required as per the direction of Engineer-in-charge.

Brick work using common burnt clay building bricks in foundation and plinth in :- Cattlle water troughCement Mortar 1:4 (1 Cement : 4 Sand) Second Class Bricks as required as per the direction of Engineer-in-charge.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in CM 1:3.

Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished with a floating coat of neat Cement. 50mm thick. as required as per the direction of Engineer-in-charge.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in CM 1:6 as required as per the direction of Engineer-in-charge.

Jagdish Bhaluni

GULAB SINGH

Hukam Singh

Geeta Ram Govt. Contractor

Arush Sharma

REENA DEVI

GULAM MOHIDEEN MIR