Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹91.1 LAccepted-AOC | L1 | Accepted-AOC Eligible | |
| 2 | L2₹97.2 L+₹3.4 L (3.59%)Rejected-AOC H NO 02 SAGAR ROAD OPPO MKD GIRLS SCHOOL TILAK NAGAR BIKANER 334001 | BIKANER | BIKANER | RAJASTHAN | 334001 | L2 | Rejected-AOC Not eligible |
Tender Value
₹1.3 Cr
EMD Value
₹2.0 L
Closing Date
24 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF BIKANER
HQ CWE AF BIKANER
IMPROVEMENT OF OMQs/ SMQs AT 263 SU AF
2023_MES_633741_1
81534/E8
Open Tender
Civil Works
Item Rate
270 days
GE AF NAL
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
GE AF NAL
₹2.0 L
Yes
13 Mar 2024
20 Dec 2023
31 Jan 2024
20 Dec 2023
24 Jan 2024
10 Jan 2024
20 Dec 2023 - 5 Jan 2024
Amount
Dismantling of bricks (laid flat or on edge) or brick tiles in roof, floors, channels kerbs, aprons etc (each layers) laid bedded and pointed in any mortar complete all as specified and as directed.
Demolition of mud in roofs, any thickness including plastering and leaping (whether full or part) and removal of debris at a distance exc. 250m but not exc 500m and deposited where directed complete all as specified and as directed.
Material and labour for providing cement concrete PCC (1:2:4) type B1 (20mm qraded aggregate) as in roof padding complete all as specified and as directed.
Material and labour for APP based modified pre fabricated five layer 3 mm thick and weighing not less than 3.6 Kg/Sqm water proofing membrane reinforced with polyester non woven fabric mat with 160 gm/Sqm black finished with compatible primer conforming to IS 3488 @ 0.30 Lit/ Sqm and bonding material 85/25 bitumen 1.2 Kg/Sqm before laying membrane laid by torch application side overlap of 75 mm and over lap of 100 mm longitudinally, At the junction of roof and parapet wall a grove of 20 x 20 mm shall be made at the ht of 100 mm and membrane shall be inserted and sealed with bituminous mastic joints/overlap shall be sealed with hot bitumen 85/25 complete all as specified and directed by Engineer-in-charge.
Supply only integral water proofing compound ISI marked.
Material and labour for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of grooves with cement mortar 1:3 complete all as specified and as directed.
Material and labour for 15 mm thick plastering in CM 1:4 over concrete surfaces of roofs finished even and smooth without using extra cement with WPC @ 3% by weight of cement complete all as specified and as directed. Note: - WPC will be measured and paid separately.
Material and labour for Cement concrete tiles 20cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry with grey cement and no pigments in floors, and cut and polished including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.
Material and labour for Providing cement concrete 1:2:4 type B0 (12.5 mm graded aggregate ) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removal complete all as specified and as directed.
Material and labour for non skid ceramic coloured tiles 7-8 mm thick, (square/rectangular) area of each tile exc. 0.11 but n.exc. 0.18 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.
Material and labour for joint free glazed coloured ceramic tiles of 300mm x 450mm x 7mm thick on vertical surface of walls set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles, over and including 10mm thick rendering in CM 1:4, complete all as specified and directed by Engr-in-charge.
Dismantling stone slabs and tiles of any description or thickness in floor aprons etc. complete all as specified and as directed.
Material and labour for machine cut Granite slab 20 mm thick fixed as in repairs for steps, pillars, window cills, cooking platforms and like and including 10mm thick (avg. thickness) cement mortar 1:4 screed bed and setting coat in cement mortar 1:2, 3mm thick, set and jointed with white/coloured cement to match the shade of slab including cutting, waste, rubbing and polishing etc complete all as specified and as directed. Note: - (i) The rate of granite stone shall be deemed to including for full rounded off corner/edges including all cutting to make it square or rectangular. (ii) The rate shall also be deemed to including for cutting and polishing machine and granite polishing to achieve the desired granite finish.
Material and labour for gunniting work to RCC work in column, flooring, side walls, beam, slab, etc by removing loose concrete cover etc, cleaning of surface with wire brush and applying epoxy paint to rusted reinforcement and plaster grade for concrete admixture 1 part of cement and 3.5 part of sand and average thickness 40 mm and making the surface even including 15mm thick plastering in CM 1:4 on brick or concrete surfaces including finishing the surfaces even and smooth, without using extra cement including necessary form work to be carried out complete all as specified and as directed. Note: - Where ever reinforcement/MS steel required will be measured and paid separately.
Providing and fixing hard drawn MS steel wire mesh 80mm x 25mm with 3mm dia wire with Heavy duty nails, Fixing the mesh on the ceiling before gunniting work complete all as specified and as directed.
Taking down cement plaster any description on brick/concrete surfaces etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.
Material and labour for rendering 15mm thick in cement mortar 1:4 on fair faces of brick / concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
Material and labour for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
Material and labour for rendering 5 mm thick in cement mortar 1:3 on fair faces of brick /concrete surface of ceiling and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.
Material and labour for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of alkali resistant primer complete all as specified and as directed.
Material and labour for preparation of newly plastered surfaces of ceiling / chajja or similar suspended work and applying two coats of white wash complete all as specified and as directed.
Material and labour for preparation of newly plastered surfaces of walls including all cornices, pilasters etc and applying two coats of acrylic exterior emulsion apex paint in camouflage / plain pattern of approved tint / shade(s) over a coat of water based primer complete all as specified and as directed.
Material and Labour for preparation of plastered or un-plastered old surfaces of walls and applying two coat of oil bound distemper on walls surfaces complete all as specified and as directed by Engr-in-Charge.
Material and Labour for preparation of plastered or un-plastered old surfaces of ceiling and applying two coat of white wash on ceiling surfaces complete all as specified and as directed by Engr-in-Charge.
Material and labour for 3 mm thick wall care putty on walls complete all as specified and as directed.
Ditto all as per Item No 26.00 above but on ceiling complete all as specified and as directed.
Complete removal of existing/old treatment by manually and mechanically and preparation of surfaces using necessary filling compound of Altek putty to obtain smooth regular/even finish using sand paper and applying two coat of exterior emulsion paint (Apex from Asian paint or equivalent in Shalimar/Berger paints) on wall in camouflage/ plant patern at any height and any position complete all as specified and as directed by Engineer-in-charge.
Material and labour for repairing of RCC projection, chajjas, facia, bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion of RCC at any height and in any situation / floor (including provision of support, formwork and welding of reinforcement if required with wire mesh of weight 3 kg/ sqm and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and applying two coats of whether proof emulsion paint to match with existing surfaces complete all as specified and as directed.
Demolition of brick or stone masonry built in cement mortar including all quoins, arches, pillar etc. complete all as specified and as directed.
Material and labour for brick work with sub class "B" brick straight or curved on plan exc 6 m mean radius and built in cement mortar 1:6 complete all as specified and as directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for as in platform, balcony or other platform complete all as specified and as directed.
Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately) complete all as specified and as directed.
Material and labour for RCC type B0 1;2:4 (12.5 mm graded aggregate) slab/shelf in kitchen supported on wall, beams and column in floor, roofs, landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Material and labour for formwork to soffit of suspended slabs such as roof slab, floor slab landing and similar work not exceeding 200 mm thick (horizontal or slope) for fair finished surfaces complete all as specified and as directed.
Supply and fixing mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.50 Sqm each including making good the disturbed surface complete all as specified and as directed.
Supply and fixing window/ventilator section of frame 72x55mm fixed to wall or concrete surface with MS hold fast (30x5mm section) 150mm long made of galvanised steel powder coated and section of shutter 47x20mm mullion section 72x50mm (Bse steel as per IS 513*D* quality galvanised as per IS 277 with zinc of 120gms/sqm) glazed or gauged and wire gauge shutter prepare to recieve wire mesh to the shutter (double door shutter) with total coated thickness of 0.6mm including powder coated grill/guard bars made of square bars 10mm dia at 150mm c/c horizontal spacing fixed in MS flat frame (30x5mm) fixed to windows frame with screws, incl 4 to 5mm thick steel glass, 0.36mm stainless steel wire cloth with 1.40mm aperture necessary fittings and all builders hardware such as handles , tower bolts & stays etc. complete all as specified and as directed. Type- 4000 series Ref. Drg. No. CEAF/STD-191/2014 SH 1/2 and 2/2.
Supply and fixing in opening solid PVC door frame of size 50mm x 47mm made out 5mm plain colour PVC sheets reinforced with MS tube but wood grain printed PVC sheet used instead of Plain colour PVC sheet and edges will be painted to match with printed sheet complete all as specified and as directed.
Material and labour for factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail and bottom rail. Paneling of plain colour PVC sheets to be fitted in MS frame welded, sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with the solvent cement complete all as specified and as directed.
Supply and fixing Mild steel butt hinges medium weight, clod rolled, 75mm, ISI marked, complete all as specified and as directed.
Supply and fixing for barrel tower bolts aluminium anodised extruded section of size 100 mm complete all as specified and as directed.
Supply and fixing aluminium fabricated type extruded handles of size 100mm complete all as specified and as directed.
Taking down chowkhats with shutter (without taking off shutters from the frames) area exc. 1.50 sqm but n. exc. 4.00 sqm each including making good the disturbed surfaces complete all as specified and as directed.
Material and labour for pressed steel frames for doors of size 125 x 60 mm for doors with one or more rebate including necessary fixing lugs, hinges, lock, strike plates of 50 x 3mm welded with frame and making arrangement for fixing of door spring etc complete all as specified and as directed.
Material and labour for pressed steel frames for doors of size 105 x 60 mm for doors with one or more rebate including necessary fixing lugs, hinges, lock, strike plates of 50 x 3mm welded with frame and making arrangement for fixing of door spring etc complete all as specified and as directed.
Supply and fixing plain, framed, Paneled shutter (two panel) 35 mm thick of 2nd class hardwood rail and style with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated including one coat of pink primer complete all as specified and as directed.
Supply and fixing glazed and gauged skeleton shutters 35mm thick, 2nd class hard wood 'Hollock' open rebated and prepared to receive glass, gauge etc (with sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc including priming coat. The size of member of shutters as specified in SSR Part-1 Section 8 clause 8.20 (b) including kiln seasoned and chemically pressure treated complete all as specified and as directed. Note: - Design as approved by Engr-in-Charge
Material and labour for preparation of new surfaces of wood and wood based surface of any description not otherwise described, over 10 cm width and girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of new steel and steel based surface of any description not otherwise described, over 10 cm width & girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing barrel tower bolts aluminium anodised extruded section of size 200 mm complete all as specified and as directed.
Supply and fixing aluminium fabricated type extruded handles of size 150mm complete all as specified and as directed.
Supply and fixing 200 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts ,fixed on plate or staple plate complete all as specified and as directed.
Dismantling boarding any description fixed in any position with screws complete all as specified and as directed.
Supply and fixing 18/19mm thick pre-laminated particle board exterior grade pre-laminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work complete all as specified and as directed.
Supply and fixing 40mm dia cupboard knobs fixed with nut screw and washer of mild steel bright finished complete all as specified and as directed.
Supply and fixing 40mm width of flaps continuous (piano) hinges mild steel bright finish or electrogalvanised complete all as specified and as directed.
Taking down shutter area n. exc. 1.00 sqm including making good the disturbed surfaces complete all as specified and as directed.
Supply and fixing factory made solid panel wood grain printed PVC door shutter 30mm thick as in cupboard consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail and bottom rail. Paneling of plain colour PVC sheets to be filted in MS frame welded, sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with the solvent cement complete all as specified and as directed.
Supply and fixing Stainless steel wire cloth fixed as in repairs, 0.56mm nominal dia of wire and average width of aperture 1.18mm including fixing to wooden/steel frames as in doors and window shutters with tinned tacks or galvanised wire staples or wooden bead complete all as specified and as directed.
Taking up or down 15 mm dia steel tubing and connection and removal from site complete all as specified and as directed.
Taking up or down 20 mm dia steel tubing and connection and removal from site complete all as specified and as directed.
Supply and fixing 15mm bore tubes "medium grade" galvanized with and including all fittings complete to walls and ceiling with necessary clamps or laid in floors complete all as specified and as directed.
Supply and fixing 20mm bore tubes "medium grade" galvanized with and including all fittings complete to walls and ceiling with necessary clamps or laid in floors complete all as specified and as directed.
Dismantling water tanks and removing from site of 500 litres capacity complete all as specified and as directed.
Supply and fixing 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified and as directed.
Dismantling of cast iron or reinforced concrete drain pipe, jointed in cement mortar and taking out if required complete all as specified and as directed.
Supply and fixing in repairs, 75mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls including suitable clamps after every one mtr of interval with cement joints fixed to wall complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs, 100mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls including suitable clamps after every one mtr of interval with cement joints fixed to wall complete all as specified and directed by Engineer-in-Charge.
Taking down rain water pipes PVC/AC (any size or pattern) including all fitting heads, shoes, bends swan necks etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing, 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval complete all as specified and as directed.
Supply and fixing 75 mm Cast iron cowls in CI Pipes complete all as specified and as directed.
Supply and fixing 100 mm Cast iron bend any radius complete all as specified and as directed.
Supply and fixing 100 mm Cast iron Junction, single, equal or unequal, ordinary or inverted with spigot or socket branch complete all as specified and as directed.
Demolition of plain cement concrete in ground floor and paving n.exc. 15 cm thick below or above ground level complete all as specified and as directed.
Material and labour for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base complete all as specified and as directed.
Material and labour for 75mm thick PCC (1:3:6) type C-2, using 40mm graded stone aggregate as in plinth protection laid in bays and surfaces finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for Kota stone slab 20-25mm thick in riser and tread of steps, skirting, dado and pillar laid over 20 mm thick cement screed bed in CM 1: 6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 10mm thick rendering in CM 1:4 for skirting including rounding of edges of stone rubbing and polishing complete all as specified and as directed.
Supply and fixing as in repair 110mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified and as directed.
Supply and fixing 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required, fixed as in repair complete all as specified and as directed.
Supply and fixing as in repair 75mm dia PVC (SWR) vent cowl, single, equal or un equal of any length including jointing with solvent cement as required complete all as specified and as directed.
Supply and fixing as in repair 75mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified and as directed.
Supply and fixing Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
Supply and fixing sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
Supply and fixing in repairs long body Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for 15mm bore pipe complete all as specified and directed.
Cutting chases, pining in making good to facings where required & pointing in cement mortar1:3 to ends etc or edges of landings, steps cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing and making good, cutting n.exc. 10cm girth in brick walls complete all as specified and directed.
Supply and fixing in repairs PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.
Supply and fixing as in repair vitreous china squatting pan "Orissa" pattern size 580 x 440mm, white, with integral footrest (excluding flushing cistern) including connection to trap, and to flushing pipe, anti-symphonage pipe, etc. complete including making good to floor, set with cement concrete, fixed as in repairs complete all as specified and directed.
Supply and fixing as in repair PVC valve less symphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC bend for required squat pattern etc, set with concrete and making good to floor, fixed as in repairs complete all as specified and directed.
Supply and fixing as in repair vitreous china wash hand basin, white flat back, size 300mm x 450mm including pillar tap 15mm dia chromium plated with capstan head with long screwed shanks and fly nuts, and brass chromium plated waste coupling 32mm dia incl waste pipe complete all as specified and directed.
Supply and fixing as in repairs Chromium plated shower roses 125 mm size fixed with swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed.
Supply and fixing as in repairs 100 mm dia mild steel chromium plated grating with or without waste pipe hole as per requirement complete all as specified and directed.
Supply and fixing in repair tubular towel Rail 20 mm dia of brass chromium plated complete all as specified and directed.
Supply and fixing in repair soap dish stainless steel, approximate size 160x 160x90mm, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
Supply and fixing Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
Supply and fixing in repairs fancy type angle stop valve, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.
Supply and fixing in repairs stainless steel plate rack of size 78cmX91cmX25cm made out of 0.80 mm thick of stainless steel sheet, fixed in wall with rawl plugs and screws complete all as specified and directed.
Taking down carefully any type of copper/aluminium point wiring (light, fan, socket or power) complete including conduits/casing capping with fittings such as switches, ceiling rose, pendants, regulators, belts, sockets, tube light fittings etc. removing the materials/debris and making good the disturbed surface of walls and floors etc. to match with the original existing finish complete all as specified and as directed.
Taking down unserviceable any type of copper/aluminium sub main wiring of any type/size/core/ type complete including conduits/casing caping etc, removing the materials/debris and making good the disturbed surfaces of walls, floors and ceilings etc to match with the original existing finish complete all as specified and as directed.
Taking down unserviceable any type of Main Switch, DB's including MCBs including wooden/GI/MS sheet board etc and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed.
Material and labour for concealed point wiring complete with tow runs of 1.5 Sqmm for Phase and Neutal PVC insulated unsheathed multistranded, copper conductor FRLSH cable of 1100V grade conforming to IS -694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed in wall/floor and fixed on ceiling/roof etc. including provision for modular flush box and provn of 1.5 Sqmm PVC insulated unsheathed Copper conductor cable of green colour for earth continutity and connecting to common earth dolly etc. complete all as specified and as directed. Note : (a) The wiring shall be done in proper colour coding using red, yellow & blue (blue for phases, black for neutral and green for earth). (b) The cost of cutting chases in brick/stone masonry walls and making good the disturbed surfaces is deemed to be included in the quoted rate. (c) Modular flush boxes shall be measured and paid separetly.
All as per item No 102.00 here in before, but for one 3/5 Pin, 5 Amp Switch socket out let on the independent board complete all as specified and as directed.
All as per item No 102.00 here in before, but for one 3/5 Pin, 5 Amp Switch socket out let on the same board complete all as specified and as directed.
All as per item No 102.00 here in before, but power point wiring with 4.0 Sqmm single core PVC insulated unsheathed cable with stranded copper conductor for one switch socket outlet 5/15 Amps multipurpose on independent board including PVC unsheathed copper conductor of 4 Sqmm as earth wire complete all as specified and as directed.
Supply and fixing ceiling rose surface Bakelite, 65 x 50mm, 2/3 terminal size single pole complete all as specified and as directed.
Supply and fixing modular socket, 5A/16A, 2/3 pin combined 2 module, flush type confirming to IS 1393:2005 complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing modular socket, 6A, 2/3 pin combined 2 module, flush type confirming to IS 1393:2005 complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing modular type 6A 1-way type SP switch confirming to IS 3854 :2012 with fire proof terminal complete all as specified and as directed by Eingeer-in-Charge.
Supply and fixing modular type 16A, 1-way type SP switch confirming to IS 3854 :2012 with fire proof terminal complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing modular cover plate with frame, of following modules complete all as specified and as directed by Engineer-in-Charge. Note: - Modular switches, socket and cover plates with frame shall be same make and model.
8 Module
6 Module
3 Module
2 Module
Supply and fixing rectangular modular flush mounted sunken block of following mounting modular switches and sockets complete all as specified and directed by Engineer-in-Charge.
8 Module
6 Module
3 Module
2 Module
Supply and fixing sheet metal enclosure 20 Amp single pole and neutral with two pin and earth plug and socket complete in metal clad board (industrial type ) one single pole MCB 20 Amp fixed properly in concealed position including making good disturbed surface complete all as specified and as directed.
Supply and fixing MCB DB SPN 8 way DB 230 V with 200 A rated bus bar double door type complete all as specified and as directed.
Supply and fixing for MCB SPN 32-63 Amps 240 V complete all as specified and as directed.
Supply and fixing for MCB SP 6 to 32 Amps 10 KA 240 V complete all as specified and as directed.
Taking down old unserviceable tube lighting fitting/recess mounting/bulk head/post top gate light/any type of light fitting/capacity complete all as specified and as directed.
Supply and fixing 1 x 20 W LED 6000K (4 ft) decorative ultra slim square profile linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient extruded aluminium body heat shrink provided for efficient dissipation and integrated electronic driver complete with lamp complete all as specified and as directed. Make: - Bajaj /Philips/Wipro
Supply and fixing 1 x 10 W LED 1100K bulk head luminaires with colour temp 6500 k including LED lighting with wall mounting holder connecting up with three core flexible copper conductor cable complete all as specified and as directed by Engineer-in-Charge. Make: - Bajaj/Philips/Wipro
Material and labour for sub main wiring in concealed complete with copper conductor, multi stranded, FRLS, PVC insulated and sheathed, 6sqmm, two run 1100 volts grade, including drawn through PVC suitable size conduct and 6sqmm single run for earthing complete all as specified and as directed.
Material and labour for Street light bracket made out of GI tubing 32 mm dia, light grade bend to shape suitable for below mentioned security light fitting with necessary MS clamps with one coat of red oxide and two coats of aluminium paint including nut, bolt, washers etc. complete all as specified and as directed.
Supply and fixing Energy efficient LED street Light Luminaires 70 watts capacity comprises a die-cast aluminium housing including connections with 2 run of 2.5 Sq mm aluminium unsheathed wire multi-stranded from LT over head line / junction box to the connector of fitting, (connection wires shall not be less than 2.5 metre in length duly run through GI bracket) complete all as specified and as directed. Make: - Philips/Bajaj/Havells
Supply and fixing Bell push flush button, single pole, one way, 240 V, 5 A complete all as specified and as directed.
Material and labour for taking down ceiling fan after disconnecting of electric cable and removing the same to MES store yard for reuse complete all as specified and as directed. Note: - The cost of fan at original location shall be included in the quoted rate.
Material and labour for servicing painting of ceiling fans complete with synthetic enamel paint by spraying including filing cavities ,one coat of after cleaning all dust re-fixing the ceiling fan in original position and connecting complete all as specified and as directed.
Supply and fix ceiling fan regulator electronic step type 230 Volts single Phase all as 2 module white polycarbonate body complete all as specified and as directed.
Supply and fixing exhaust fan of size 300 mm sweep assembling at site including electric connection from ceiling rose to connector with flexible cord twin core twisted copper of size 23/0.0076 and testing complete all as specified and directed. Make: - Havells/L&T/Bajaj Note: - Old unserviceable Exhaust fan will be deposited to MES store for BER purpose only.
Material and labour for cutting, opening through existing brick wall size 300 mm dia to be exhaust fan / ventilation fan and finished with the disturbed wall by cement plastering and cement motor 1:4 and match with the existing surface complete all as specified and as directed.
Supply and fixing LED lamp 9 watt capacity complete all as specified and as directed.
Supply and fixing lamp holder, white Polycarbonate body with black plate suitable for batten fitting fixed in position and connecting complete all as specified and as directed.
Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep in soft / loose soil and getting out and leveling of bottom surface to required level complete all as specified and as directed.
Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and as directed.
Removing excavated material of soils from site to a distance not exc 50mtr away and depositing where directed not exc 1.5mtr from the starting point complete all as specified and as directed.
Material and labour for Clear Sand for cushioning underground cable 8 cm below and 15 cm above in trenches / cable duct filling in level complete all as specified and as directed. Note: - Punned thickness only measured and paid.
Material and labour for Brick well burnt locally available sub class 'B' laid over sand cushioning to cable protection in trenches keeping width of brick parallel to the length of cable complete all as specified and as directed.
Taking down old unserviceable cable of size 50 Sqmm 3.5 core complete all as specified and as directed.
Supply and laying under-ground LT Cable XLPE insulated heavy duty armoured sheathed 1100 volts grade of cross sectional area 50 Sq mm, 3.5 core, with aluminium conductor, ISI marked as per IS : 7098 ( Part-1) along with suitable size aluminium cable lugs, gland if required and jointed in any description complete all as specified and as directed.
Supply and fixing in repairs 50 mm GI tube, light grade with all fittings laid in trenches / under road /floor along the pipe for cable protection complete all as specified and as directed.
Cutting of road crossing, PCC hard standing, under boundary wall for lying of pipe/cable including making good the existing surface with same finish to match the original finish complete all as specified and as directed.
Material and labour for Earthing complete with galvanised steel earth plate, electrode, 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to GI strip 32x 6 mm thick dia by means of nuts, bolts & washers of GI as shown in electrical plate No. 5 of SSR Part-I Connected to earthing ten point all as specified and including necessary earth pit PCC 1:3:6 chamber be 50mm thick PCC 1:2:4 chamber cover with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover , watering arrangement shall be made with GI pipe light grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 15mm dia unto 7.5 from the earth plate electrode & refilling of soil etc including necessary excavation & earth work in any strata and PCC chamber all as specified and directed by Engineer-in-Charge including demolish existing earth pit taking out old materials.
SHREE GURU NANAK CONSTRUCTION COMPANY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .