Construction of cafeteria for polytechnic college at watapora, Bandipora

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within alead of 50 m.

Providing and laying of stone soling hand packed including loading, unloading,cost of material and carriage complete job.

Providing and laying in position cement concrete of 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)grade excluding the cost of centering and shuttering - All work up to plinth level :including curing,hire and runing charges of concrete mixer,vibrator,T&P but excluding cost of cement.

labour charges for cutting,bending,binding and assembeling in position steel reinforcement in columns, suspended floors and stair cases of superstructure excluding cost of steel reinforcement.

Providing and fixing of Form work of steel plates not less than 3.0mm thick M.S. sheets of specified size stiffened with suitable structral frame work true to plane or kit ply plates of not less than 12mm thickness of specifed sizes stiffened with suitable timber frame work prop height upto desired height ornamental projections upto desired height and thickness complete including its removal for all RCC works from foundation to fifth roof level.

foundation

lintel beams

suspended floors

Providing and laying in position cement concrete of 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20/40 mm nominal size)grade excluding the cost of centering and shuttering - All work up to plinth level :including curing,hire and runing charges of concrete mixer,vibrator,T&P but excluding cost of cement.

Providing and laying in position 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)M20 grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All workup to plinth level :including curing,hire and runing charges of concrete mixer,vibrator,T&P but excluding cost of cement.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

supply and filling under floors by way of (GSB) material as per IRC specifications including spreading, watering and compacting with hand rollers including cost and carriage of all materials complete job.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in 1:6 cement mortar (1 cement: 6 coarse sand) up to desired height in each floor from foundation to fifth level including any recession or arches as per architectural drawings including curing,hire and runing charges of T&P but excluding cost of cement.

15mm thick cement plaster on interior walls in cement sand mortor (1:6 mix) including curring, scaffolding & cost of sand but exclduing cost of cemnet only.

Providing and Laying of 50mm thick cement concret flooring M15 grade including curing, hire and running charges of machinery Head load of cement from site store to actual site of work, cost of sand and aggregates. But excluding cost of cement.

Providing and applying putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete jobincluding scaffolding and cost of all materials

Providing and applying one coat of water thinnable cement primer of approved brand and manfacture on exterior wall surfaces including cost of all material, scaffolding charges complete job.

Finishing exterior walls with water proofing cement paint of required shade on New work ( Two or more coats applied @ 3.84kg/10qm) including cost of all materials complete job.

Providing and laying Vitrified floor tiles of size (600x600mm) (thickness to be specifiedby manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc.complete but excluding cost of cement.make: kajaria or equivalent

Providing and laying ceramic glazed wall tiles of size (600x600mm) (thickness to be specifiedby manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc.complete but excluding cost of cement.make: kajaria or equivalent

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge,.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent but excluding cost of cement

Providing and fixing of deodar wood work in frames of doors, windows, clerestory windows and otherframes, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( including cost of hold fast lugs or dash fastener complete)

Providing and fixing of 35 mm thick kail wood glazed shutters for windows and clerestory windows, including ISI marked M.S. pressed butt hinges brightfinished of required size with necessary screws,handles,T-bolts all complete including cost of all materials as per direction of Engineer-in-charge.

Providing and fixing of 35 mm thick kail wood door shutters including ISI marked M.S. pressed butt hinges brightfinished of required size with necessary screws,handles,T-bolts, L-drops etc complete including cost of all materials as per direction of Engineer-in-charge.

Providing andfixing of 3.5mm thick glass panes in window shutters including cost of glass cutting putty, and beading complete. Make saint gobin or equivalent

Providing and fixing wire gauge shutters using stainless steel grade 304 wiregauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for windows and clerestory windows with necessary screws and beading complete job.

providing and applying of primer coat over new wood and wood based surfaces with white primer of specified brand, including cost of sand papering and cleaning the surface.

Painting new wood / wood based surfaces with two or more coats of synthetic Enamel of specified shade and brand to an even shade excluding priming and preparation of surfaces but including cost of sand papering and cleaning.

labour charge for fabrication and erecting welded in built up sections, in beams,rafters, purlins in trusses and framed work, including cost of cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete job excluding cost of structural steel.

Providing and Fixing of C.G.I roofing of colour coated profile sheeting comprising .50mm thick class -3 CGI sheets/profile sheets fixed to supporting structure with 8mm dia GI J or L hooks / power driven screws, GI limpet and bituminious felt washers, including PGI ridges, valleys complete but excluding cost of supporting structure.

saintary works

Providing and fixing Polyvinyl Chloride (PVC) pipes of 100mm dia including cost of all necessary fittings, tee's,bends,tunctions etc complete job. (make:prince,fenolex or equivalent)

Providing and fixing Polyvinyl Chloride (PVC) pipes of 75mm dia including cost of all necessary fittings,tee's,bends,tunctions etc complete job.(make:prince,fenolex or equivalent)

Providing and fixing G.I. pipes (B class) complete with G.I. fittings and clamps, including cutting and making good the walls etc.Make surya prakash or eqivalient

15 mm dia nominal bore

20 mm dia nominal bore

Providing and fixing of 15 mm C.P. brass bib cock short body of approved quality conforming to IS:8931 nominal bore make jaquar,Grohe or eqiuivalent

Providing & fixing Long pattern W.C Pan of size 580x440 mm White vitreous china water closet squatting pan (Indian type)along with "S" or "P" trap including all complete as per the direction of Engineer-in charge.make hindware or eqiuivalent

Providing and fixing 610x510 mm bowl depth 200 mm Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required complete job.

Providing and fixing White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including pedestal, painting of fittings and brackets, cutting and making good the walls wherever required.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 600x450 m.

Providing and fixing of 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

Providing and placing on terrace (at all floor levels) polyethylene triple layer water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in soakage pit and septic tank trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within alead of 50 m.

providing and laying of Random rubble masonry in soakage pit with hard stone including levelling, dressing,carriage,scaffolding charges complete job upto plinth level.

Internal electricfication including wiring, switches, boards, MCB's, lights,fans 1200mm, make usha, crompton, havells or equivalent complete including cost of all materials as per direction of Engineer-in-charge.

Electric points

M/S TARIQ MOHAMMAD MIR

MOHAMAD SHAFI NAJAR

M/S GHULAM RASOOL RAINA and SONS

m/s abdul rashid mir

M/s Mohd Yousf Bhat