12/EWCL/2025-26

Amount

Safe loading, Carriage and Unloading of following Store Material with Proper Stacking from any ESC of RZ/SZ to JE's Dump Store/Store to work Site: (Approx. ….. KM)

ST Pole 11 Mt Long-SP-55

ST Pole 13 Mt Long-SP-70

9 Mt. Long PCC Pole

9 Mt. Long PCC Pole for Stud Pole

V-type cross arm 100x50x6 mm, MS Channel 9.6 Kg./mtr

Polymeric 11 KV Disc Insulator B&S. Type 70 KN.

Disc Fittings Dog/ Racoon 70 KN.

Polymeric 33KV Pin Insulator

M.S. Angle Iron 65x65x6mm, 4300 mm long 2/6/8 no. Bracing, with 4/12/16 clamps (5.8 kg./m)

M.S. Angle Iron 65x65x6, 3200mm long, 5.8 Kg/Mtr. for cable with clamp

Top channel 125X65mm, 3200 mm long (13.10 Kg./m) with clamp

GI wire 6 SWG for guarding along the line

GI wire 8 SWG for guarding a cross the line

Guarding Angle 75x75x6mm (3500/2200 mm long)

Earthing complete

Complete Stay (GI Stay rod 20x1800 mm, Stay 7/8 SWG 10 Kg.)

ACSR Dog Conductor

33 KV XLPE Cable 3x300 sq.mm.

33 KV XLPE 3X300 sq.mmm C/J/Kit (Outdoor)

33 KV Lightening Arrester

33 KV line Isolator

33 KV CT 400/200/1 Amp.

33 KV VCB 800 Amp., 750 MVA

Erection of the following support including cutting, making holes, fixing of all types of accessories digging pits complete in all respect as per RESSPO drawing. All type of clamps nut & bolt, washer to be provided by contractor.

33 KV Single support of ST Pole 11mtr long.with X Arm, Pin insulator & other all accessories

33 KV Double pole structure on S.T. Pole 11mtr long complete with Top Channel,bracing.& other all acessories

33 KV Single support of ST Pole 13mtr long.with X Arm, Pin insulator & other all accessories

Tri Pole structure on ST Pole 11mtr long complete with Top Channel,bracing.& all other acessories as required

Four Pole structure on ST Pole 11mtr long complete with Top Channel,bracing.& all other acessories as required

33 KV Single support of PCC Pole 9mtr long.with X Arm, Pin insulator & other all accessories

33 KV Double pole structure on PCC Pole 9mtr long complete with Top Channel,bracing.& other all acessories

Tri Pole structure on PCC Pole 9mtr long complete with Top Channel,bracing.& all other acessories as required

End Type Pole structure on PCC Pole 9mtr long complete with Top Channel,bracing.& all other acessories as required

Stud Pole structure on PCC Pole 9mtr long complete with all acessories

Erection/fixing for 33 KV Stay set with stay wire 7/8 SWG and clamp as per RESSPO drawing including binding, clambing, clamping, tightening, and nozzeling etc. complete in all respect including its grouting in ratio 1:4:8 of cement, sand and brick ballast and sand before back filling of the pits as per RESSPO schedule all clamps, nuts & bolts, cement, brick, concrete blast and etc would be provided by contractor.(Stay Set , Stay wire to be provided by Dept.)

Concreting of supports in 1:4:8 ratio and plinthing of supports upto 300mm above ground level by using cement ,brick ballast and sand in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing.All material would be provided by the contractor.

Laying and sagging of 3 phase ACSR Dog conductor from Double pole upto 33KV substation including jumpering, hoisting, fixing of all type of insulators, binding, jointing and its clamping etc. in all respect.

Earthing of STP/PCC supports with Earth Electrode 2.5 mtr. length including excavation of pit and driving M.S. Rod upto proper depth and connecting the earth electrode with the help of 6 SWG G.I. Wire and earthing lugs. RESPO/ RES. drawing.Earthing of each section pole is also to be done. All type of nut & bot would be given by the contractor.

Cradle type Guarding of HT/LT/Telephone line/ road/river crossing etc. by providing GI wire No. 6/8 and making net with difference of 1.00 Mtr. Completely including fixing of channel/angle etc. with proper locking at each support. All type of nut bolt ,clamp to be provied by the contractor.

Painting of following supports with one coat of red oxide primer and two coats of aluminum white paint of ISI mark and top danger portion of each support must be painted by providing two coat of Post Office Red Paint (1.5mtr upper portion of support.) Paint and material would be given by contractor to complete of job.

Single Pole of 11 M S.T.P

Double Pole of 11 M S.T.P

Single Pole of 13 M S.T.P

Tri Pole of 11 M S.T.P

Four Pole of 11 M S.T.P

Providing & Fixing of 33 KV SMC Danger board ( as per GTP)with Clamp & Nut Bolt

Providing & Fixing of 33 KV SMC Number Plate ( as per GTP) with Clamp & Nut Bolt

Providing & Fixing of G.I. Barbed wire (2 Kg./pole)

Providing & Fixing of Stone Pad (300x300x75 mm)

Digging and Laying of 33 KV, 3x300 Sqmm XLPE Cable (Double circuit) by drilling method depth minimum1.5 mtr. Depth from ground level.

Drilling and Laying of 3x300 Sqmm 33 KV, XLPE insulated U/G Cable in HDPE Pipe size of 150 mm dia (Pipe to be laid by HDD method) single circuit below minimum 1.5 mtr. Depth from ground level.(HDPE Pipe to be provided by contractor)

Hoisting of 33 KV 3X300 Sq. mm. XLPE cable on double pole including G.I. pipe of size 6" dia 3 M long and its jumpering complete with clamps, nuts and bolts. (GI Pipe,clamps ,nut bolt etc to be provided by contractor,)

Installation of Isolators: Assembling and installation of line/ bus isolator on the isolator structure adjusting of opening mechanis in proper alignment so as to ensure smooth operation of the same. In case of line isolator proper operation of earth links shall also be ensured. The work includes fabrication & proper connection with earthmat/earthing by G.I. earth strip 50x6mm proper fixing if required (All decentralised materials to be provided by Contractor).

Installation of P.I. & Lightening Arrestors : Assembling, installation & mounting of 3 No.(1set) L.A. & Post insulator on the L.A & P.I. Structure/complete with making earth connections (separate) with GI Strip 50x6mm. The work includes fabrication for fixing if required. (All decentralised materials to be provided by Contractor).

Installation of CT: Installation of 3 No.(1 set) CT on the CT Structure along with CT Junction Box. The work includes fabrication, proper fixing of C.T. with making earth connections(Earth Mat/earthing) with GI Strip 50x6mm and control wiring connection, proper commissioning & testing.(All decentralised materials to be provided by Contractor).

Installation of VCB: Installation of 33KV VCB complete work with making earth connections(Earth Mat/earthing) with GI Strip 50x6mm including control wiring, commissioning & testing (All decentralised materials to be provided by Contractor).

Fabrication, Errection & Grouting of Substation Structure:

Isolator Structure: Fabrication of Isolator Structure 3.5 mtr in height as per Drg. digging of two no. pits of size 1.075x0.9x0.3 mtr. providing Stone Pad at the bottom of the pit and grouting of two legs of the isolator structure in CC(cement coarse sand and stone grit of 20mm gauge) of the ratio 1:4:8 in block of 1.075x0.3 mtr. including all civil material, T&P complete in all respect. The work includes dragging, shifting up to 40 Mtr., raising and erecting the two legs with runner on proper alignment and level and plumb. Both plinths of the isolator structure shall be properly finished with smoothing of edges.

Lightening Arrestor, P.I. & CT Structure : Fabrication of Lightening Arrestor, P.I. & CT Structure 3.5 mtr. in height as per Drg. digging of two no pits of size 1.075x0.9x0.3 mtr. providing stone pad at the bottom of the pit and grouting of two legs of the Structure in CC(cement coarse sand and stone grit of 20mm gauge) of the ratio 1:4:8 in block of 1.075x0.3 mtr. including all civil material, T&P complete in all respect. The work includes dragging, shifting up to 40 Mtr., raising and erecting the two legs with runner on proper alignment and level and plumb. Both plinths of the structure shall be properly finished with smoothing of edges.

Plinth of VCB : Construction of Plinth of size 2.0 mtrx1.5mtrx0.9mtr. suitable for erection of upper structure of 33KV VCB including grouting of anchor bolts in proper alignment and level. Scope of work includes excavation of foundation base and concreting in CC 1:3:6 (cement, find sand & stone grit) 1st class brick work in cement mortor ratio 1:4:8.

Supply and laying of following size Armoured Copper Control Cable through underground/cable trench/trenching SGR interlinking through proper connections to T/F Control panel/protection board/Battery and Battery Charger/Bunch joints, Relay 33/11KV T/F junction Box/33KV VCB, CTs etc. as per site conditions:

2x2.5 Sq.mm

4x2.5 Sq.mm

Clearing of the line route by cutting of tree branches during erection of line and also upto the time of energisation completely as per direction of Incharge.

Electrical safety Department NOC charges documentation & approval fees etc

Railway Crossing/Road Restortion Crossing NOC charges, documentation & approval fees etc.

Forest NOC charges documentation & approval fees etc

High Pressure Testing

SINLESS ELECRICAL CO. PVT. LTD. (BID ID -5539103)

RAJ ENTERPRISES (BID ID -5539587)