Maintenance and Repairing of Rehbar e sehat quarter no.10 occupied by Paramjeet singh GMC Jammu

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area of 3 sqm. and below

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm

Providing and laying anti skid floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm

Providing and Fixing first quality digital wall tile 600 x 300 including 12 mm thick plaster and grouting the joints with white cement and matching pigment.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Providing and dixing cup bords/Almirah frame and shutters with 6mm thick ply fixed over 19mm thick ply of supeior quality with decorative mica fixed on outer side of almirah of superior quality and plain mica of superioe quality on inner side of almirah shutters complete incluidn internal boxes / partitions with 19 mm thick ply of superior quality wherever required decorated with plain mica/enamel/emulsion complete wherever required including all fittings and fixtures as directed by Enginer-in-charge (complete job)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class deodar wood. 35 mm thick

Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work (Parkash, Suyra Make) or equivalent

20 mm dia. nominal bore (Medium)

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) (Uniqu/DRP make)

20 mm nominal bore

Providing and fixing PVC pipe including / jointing with seal ring (Finolex / Supreme) of pressure @ 4kg

75mm dia pipe

110mm dia pipe

Providing and fixing PVC pipe including / jointing with seal ring (Finolex / Supreme) of pressure @ 5.5 kg/Cm2

75mm dia plain bend

75mm dia door bend

110mm dia plain bend

110mm dia door bend

110mm dia door Tee

Providing and fixing PVC floor trap of Finolex / Supreme or equivalent

Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C automatic flushing cistern, with fittings, standard size G.I./ PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and in C.P brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever require Single squatting plate with 5 liter P.V.C. automatic flushing cistern.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :

White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.

P/F PVC conection 450 mm long

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:

Flexible pipe 32 mm dia

Providing and fixing C.P fittings 15mm nominal bore and fixtures

Short nose bib cock)

Long nose bib cock

Angle valve

C.P gratings 4"

Soap dish

C.P. towel rod 2'-0"

Towel ring 200 mm dia

cp jet

shower 6 inches

handle 200mm

handle 150mm

tower bolt 150mm

tower bolt 100mm

Engage Labour for dismentaling of tiles and shifting of dismentleed material

engage plumber for removing of old gi pipes and repair /removing of saintry fitting

providing and fixing 6mm thick ply with fevicol nails complete job for celing (complete job) of superior quality as per the direaction of engineer in charge

welder engage for repair to GI sheet

Engage Sweeper

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shades, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)

Engage carpenter 2nd Class for removing of old jalli shutters /chowkhats and easing of doors and windows and refixing of doors and windows

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class deodar wood

Providing and fixing factory made flush door shutters 30 mm thick made of pre-laminated flat pressed three layer particle board conforming to IS: 12823 exterior grade (Grade I Type II) having one side decorative lamination of approved shade and other side balancing lamination including second class teak wood lipping of 25mm widex12mm thick with necessary screws and black enameled M.S. butt hinges complete as per directions of Engineer- in-charge

Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-inCharge. 18 mm thick

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class deodar wood

electrician engage for repair to old electric points

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board18.11.2.2 470x420mm bowl depth 178mm

Providing and fixing 25mm thick wooden beading

Please Enable Macros to View BoQ information