REPAIR TO FLEXIBLE PORTION OF THE RUNWAY WITH PME AT AF STN NAL

Amount

Material and labour for preparation of flexible pavement surfaces (Runway/Taxi Tracks) by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt etc. and applying uniformly (by using mechanical sprayer) two coats of Polymer Modified Emulsion (PME) @ 1.00 litre per sqm (undiluted quantity of PME 1.00 litre per sqm) mixed with 1 litre of water and mineral filler powder as per manufacturer's instructions and all as specified and directed. Name of Manufacturers:- (i) M/s L N Petro Chem Private Limited. (ii) M/s Hindustan Colas Private Limited. (iii) M/s Ooms Polymer Modified Bitumen Pvt Ltd or any other make approved by E-in-C’s Branch. The Tenderer shall take into consideration the following points while quoting the rates of this item: - Notes: - (a) The work shall be carried out through registered applicators of the manufacturer only. (b) Second coat shall be applied after complete curing of 1st coat as per manufacturer's instructions.

(c) If due to any reason, there is a asving in the consumption of PME (due to any eventually) whilst execution on flexible runway surfaces the the balance quantity of PME material will be deposited by the concerned contractor in the B/R storage yard which shall e subsequently utilized by the department durign exlgencies. Tenderers should ntoe that nothign extra willbe admissible or payable as credit to the contractor on this account. Tenderers are hereby advised to keep this factor in mind before quoting their rates. (d) Friction test shall be conducted after final coat to ascertain friction value (Range between 0.3 to 0.5). The requisite friction test machine will be arranged by the contractor at his own cost. Nothing extra will be admissible to the contractor on this account. (e) The necessary material and T&P for full proof arrangement for sealing of embedded lights i.e. Runway Centre Line lights and Touchdown Zone lights to prevent seepage of PME in to the lights /defacing of lights will be arranged by the contractor at his own cost .Nothing extra will be admissible to the contractor on this account. (f) Entire raw material to be used should be procured (from manufacturer) & brought to site before execution of work and stored at site as per direction of GE.

Complete removal of old painted surfaces of any description exceeding 10 cm width or girth and applying two coat of Road Marking Paint (Water Based) of tint as approved by GE as in lines, dashes, arrows, letters etc on Flexible pavements/rigid pavements and the like complete all as specified and directed.

SHREE GURU NANAK CONSTRUCTION COMPANY

Ankit Jindal And Company

KULWANT SINGH

M/s DATAAR BUILDERS

M/s VARINDER PAL SINGH AND CO

M Ramanaiah