Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.9 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹22.6 L+₹2.7 L (13.5%)Rejected-AOC 227 2 5TH B MAIN ROAD 2ND BLOCK HRBR LAYOUT KALYAN NAGAR BANASAWADI BANGALORE 560 043 | BENGALURU URBAN | KARNATAKA | 560043 | L2 | Rejected-AOC L2 | |
| 3 | L3₹23.8 L+₹3.9 L (19.4%)Rejected-AOC 34 B A HOUSE NO 253 3 SECTOR C KALERHARI CHURCH ROAD AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L3 | Rejected-AOC L3 | |
| 4 | L4₹23.8 L+₹3.9 L (19.6%)Rejected-AOC | L4 | Rejected-AOC L4 |
Tender Value
₹21.9 L
EMD Value
₹43,900
Closing Date
1 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Yelahanka
GE (AF) Yelahanka Bangalore - 63
PROVISION OF CERTAIN MINOR WORKS AND MAJOR REVENUE WORKS AT AFS YELAHANKA
2022_MES_555257_1
8111/E8
Open Tender
Civil Works
Item Rate
180 days
AF Stataion Yelahanka
As per NIT
9 documents required · 9 mandatory
₹500
GE (AF) Yelahanka
₹43,900
Yes
9 Mar 2023
30 Sept 2022
3 Nov 2022
30 Sept 2022
1 Nov 2022
18 Oct 2022
Amount
Excavation in trenches, n exc 1.5m wide and n.exc 1.5m in depth; for foundation, etc or for shafts, wells cess pits, manholes, pier holes, etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil
M&L for plain cement concrete 1:4:8, Type D2 using 40mm graded stone aggregate as in foundations , filling and mass concrete complete all as specified and directed.
M&L for providing precast cement concrete block masonry with solid blocks Type C1, (20mm graded stone aggregate) set in CM 1:6, exc 10 cm in width complete all as specified and directed.
Forming Jambs etc to openings (to foregoing item), including cutting, toothing and properly bonding into old work also facing, jointing and pointing to match existing work complete in Cement Mortar 1:4
Returning filling in, including spreading, levelling watering and well ramming in layers not exc 25 cm in soils
Removing excavated material exc 1.50 KM but n exc 5.00 KM and depositing where directed in soils
M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement
M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement
M&L for rendering 5mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 finished even and smooth without using extra cement
M&L for preparing new wall surfaces and applying two coats of cement base paint on new wall surfaces complete all as specified and directed.
M&L for cutting opening through brick walls for door, window and other openings or enlarging exiting openings, converting window into door openings, etc or cutting out defective brick work for under pinning, including providing, fixing and removing shoring, cleaning and stacking bricks removing surplus serviceable bricks, hardcore etc to store and rubbish not exc 50 m build in cement mortar or cement lime mortar
M&L for Reinforced cement concrete as in beams, cantilevers, bressumers, lintels over 1.50 m span in Type B1, 1:2:4 using 20mm graded stone aggregate complete all as specified and as directed.
M&L for RCC Type B1, 1:2:4 using 20mm graded stone aggregate as in Chajjas
M&L for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilvers, shelves including supports, overhangs, etc also splays between floors and beams etc for rough finished flat surfaces of concrete complete all as specified and as directed.
M&L for Form work to soffits of suspended slabs, such as roof slabs, floor slabs, landings, Chajja and similar work; not exceeding 200mm thick Horizontal or sloping rough finished surfaces of concrete flat
M&L for Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs exc 5cm but not exc 10 cm wide
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
M&L for TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
M&L for 105 x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete as specified supplied and fixed
M&L for providing cement concrete 1:3:6 , Type C1 using 20mm graded stone aggreagate as in lintes upto 1.50m span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, filling back of chowkats water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed
S&F 35mm thick 2nd class Hard wood Plain framed panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial veneers , supplied and fitted to chowkats
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars dovetailed or welded complete all as specified.
S&F mild steel pressed handles, oval type, stove enamelled black of size 125mm
S&F Mild Steel barrel tower bolts, stove enamelled black with bright bolt and fixed in 200mm
S&F 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.
S&F floor door stopper of size 150mm aluminium alloy body and tongue, anodized, with hard drawn steel spring fixed in floor
S&F 4.00mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqm each in each pane
S&F framed work such as grills, gratings, etc, with ends of bars shouldered and /or riveted, or forged into spikes; framed guard bars; barred iron doors ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290 Gde E-165
M&L for preparation of new wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and as directed.
M&L for applying two coats of synthetic enamel paint over a coat of Red oxide zinc chrome primer on steel surfaces of any description, over 10 cm in width or girth, not otherwise described including preparation of new steel surfaces.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for
Taking down cement plaster or cement lime plaster of any description on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water
M&L for hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to true surface complete all as speciied and as directed.
M&L for 75 thick cement concrete 1:3:6 ,type C-2 using 40mm graded stone aggregate complete all as specified and as directed
M&L for 25mm thick cement Concrete 1:2:4,type B-1 using 20mm graded stone aggregate complete all as specified and as directed
M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4
M&L for Vitrified ceramic ties,coloured dark shade 9-10mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.
All as per item No.38 above but for skirting
M&L for preparation of old wall surfaces and applying two coats of oil bound distemper on wall surfaces
Applying two coats of Cement base paint on wall surfaces including prepartion of old wall surfaces
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed.
S&F of 2nd class Hardwood 20mm thick Boarding clean sawn with butt joints
S&F Anodised Aluminium frame (powder coated) for doors, windows, ventilators with one or more rebates of any type and pattern including joining cleat for fixing etc. complete all as specified.
S&F Anodised aluminium door shutters,(Powder coated) aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws incl all necessary accessories etc. complete all as specified.
S&F sheet Glass Ordinary quality 4.80mm thick and glazing with oil putty in squares n exc 0.50 sqm in each pane
Securing glass in metal frame fixing only
S&F false ceiling, grid size 600mm x 600mm with using classic lite tiles 595mm x595mm x 16mm bevelled regular edge laid on GI snap grid system with roll-formed made out of hot-dip galvanised iron steel grid comprising of 24mm wide T-section exposed flanges which shall be powder coated, white, main runner made from 0.33mm thick galvanised steel sheet and size 24 x 32mm and fixed to structural soffits, suspended of GI wire 4mm dia 1200mm center to centre using approved rawl plug, fasteners and screws.
M&L 25mm thick PCC (1:2:4) Type B0 using 20mm graded aggregate as in sub floors, floors etc complete all as directed.
M&L for 20mm thick Screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes.
M&L for "Sadarahalli " Granite (of any type) tiles 20mm thick as in flooring, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing etc, complete all as directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises.
M&L for Rendering 10mm thick cement plastering CM 1:4 on fair faces of brick work or concrete surfaces finished even and fair to receive wall finished such as dados.
M&L Glazed coloured ceramic tiles 300 x 200x7mm / 350x250mmx7mm /450X 350x7mm thick in vertical surfaces such as skirtings, dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of the tile
Taking down door chowkats or frames exceeding 1.5 sqm but not exceeding 4 sqm with shutters (without taking off shutters from the frame) of any description
S&F 35 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides
S&F MS Butt hinges medium weight cold rolled 100mm long.
S&F aluminium anodized barrel tower bolt of extruded section 150 mm length.
S&F extruded aluminium alloy handles fabricated type 150 mm size, anodized.
S&F 300 mm long aluminium anodised sliding door bolt with hasp, staple cast type complete all as specified and as directed
Supply and installation of "Godrej Interio" Modular kitchen systems, "L" shapped, length along the wall 3.30M & 3.30M respectively. Bottom cabinet height 700mm and depth 560mm. Body and doors made of Galvanised steel with epoxy polyester powder coated and tray, baskets, drawers & Hinges etc made of Stainless steel SS 304 consisting of 2 Nos plain shelf cabinet bottom, 1 No Bottle pullout (For Masala and sauses) in wired basket SS 304 normal closing and 1 No corner plain shelf cabinet bottom on one side and on the other side, 1 No cooking kit (3 trays) for cutlery, katori and plates in wired baskets SS 304 normal closing, 2 Nos Utensils Kit (for Kadhai, cooker etc in wired basket SS 304 normal closing and 1 No plain shelf cabinet bottom with Soft closing SS hinges, handles complete of any colour/pattern/design, custom made all as specified and as directed by Engr in charge. Note:-1. Ganite for kitchen platform required if any shall be measured and paid separately. 2. Any damage / addition alteration to floor, dado necessitated during the installation of kitchen cabinet shall be made good and nothing extra shall be paid on this account.
M&L for Granite (of any type) work 25mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as directed
M&L for Providing edge moulding to 18-20mm thick granite stone of counters vanities, floors, steps etc. including machine polishing to edge to give high gloss finish etc. complete
Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil.
Earth work excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
Spreading and levelling in layers n exc 25 cm thick and well ramming in floors including watering as required.Earth obtained from excavation
Removing surplus excavated soils exc 250 m but n exc 500 m and depositing where directed.
M&L for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area
M&L for treating the back fill in contact with foundation at the rate of 7.5 litres of emulsion per square matre of vertical surface. (Area of the sub structure in contact with backfill to be measured)
M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface.
M&L for plain cement concrete in foundations 1:2:4, type B2 ( using 40 mm graded stone aggregate).
M&L for reinforced cement concrete (design mix M-25) using 20 mm graded stone aggregate as in foundations including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete
M&L for reinforced cement concrete (design mix M-25, using 20 mm graded stone aggregate) in cloumns, pillars, piers, posts and struts
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter of plinth beams,rough finished flat surface
Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions. Square,rectangular or polygonal rough finished flat surface
Use and waste of formwork to chajjas including edges, fair finished flat surfaces.
M&L Providing precast cement concrete Type B1 1:2:4 using 20 mm graded stone aggregate in window or door cills, lintels, bressumers, steps and the like and set in CM 1:4 complete all as specified and as directede.
M&L for RCC (design mix M-25) using 20 mm graded stone aggregate as in chajjas complete all as specified and as directed.
M&L reinforced cement concrete (design mix M-25) using 20 mm graded stone aggregate as in Roof beams complete all as specified and as directed.
Use and waste formwork to edges of slabs , treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, fair finished flat surfaces.
All as per item above but exc 5 cm but n exc 10 cm wide.
M&L for RCC (design mix M-25 )using 20 mm graded stone aggregate as in slabs supported on beams and columns in roof slab
Supply only integral water proofing compound.
M&L for preparing surfaces of wood and steel work,new or old,of any description and treated with tar or coal tar black paint.
M&L for providing cement concrete in pcc block type B1 1:2:4 using 20 mm graded stone aggregate complete all as specified and as directed.
M&L for providing cement concrete in filling in frame of door using 1:2:4 type B0 using 12.5 mm graded stone aggregate complete all as specified and as directed.
S&F steel ventilator with top hung shutters including projecting type hinges with steel handle,and steel peg stay,complete with glazing bars,dove tailed or welded.
S&F aluminium,anodized,barrel tower bolts of extruded section,length of bolt 200 mm complete all as directed.
S&F aluminium alloy, anodized, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extended sections and fixing blots and sliding bolts of extruded sections or cast aluminium alloy and fixed, length of bolt 250 mm.
S&F butt hinges extruded aluminium hinge of 125 mm long.
S&F hold fasts,clamps, hooks for hanging fans, plain angle cleats for securing purlins and similar articles confirming to Fe 290 Gde E 165.
M&L for sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane of 3mm thickness.
M&L for rendering 10 mm thick in CM 1:6 on PCC block masonry or concrete surfaces and finish the surface even and smooth without using extra cement on internal walls.
M&L for rendering 15 mm thick in CM 1:4 on PCC black masonry or concrete surfaces using water proofing compound and finish the even and fair without using extra cemen on external walls..
M&L for rendering 5 mm thick on ceilings using cement plaster CM 1:3 to be finished even and smooth witthout using extra cement.
Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in cornices, drip moulds and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all and stopped ends, etc.
M&L for 100 mm thick cement concrete 1:4:8,type D2 using 40 mm graded stone aggregate as in sub base to floor.
M&L for 40 mm thick cement concrete type B1, 1:2:4 using 20 mm graded stone aggregate as in floors.
M&L for hard core of brocken stone or boulders of gauge n exc 63 mm deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface in flooring
M&L for rendering 10 mm thick on walls in CM 1:4 and finish the surface even and smooth without using extra cement.
M&L for treating the ends of small articles such as stop, gully gratings, hold fasts,clamps, etc area n exc 0.1 sqm each.
M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area.
M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emusion per meter of the perimeter wall.
M&L for 75mm thick PCC 1:3:6, type C1 using 20mm graded stone aggregate as in plinth protection
M&L for forming 12 mm thick expansion joints filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’
M&L for preparing new plastered surfaces of wall and applying two coats of cement base paint on all external wall.
M&L for preparing new plastered surfaces of wall and applying three coats of white wash on internal wall.
M&L for preparing new plastered surfaces of ceiling and applying three coats of white wash.
M&L for plastering 10 mm thick in CM 1:3 on roof top for water proofing treatment.
M&L for applying evenly a tack coat of industrial bitumen grade 85/25 at the rate of 1.2 kg per sqm in roof treatment in roof top including cleaning surface and providing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application.Applying evenly a coat of blown type bitumen at the rate of 1.50 Kg per square metre and blinding with clean dry sand @ 0.50 cum per sqm complete all as specified and as directed. Note : The laying/ applying of APP membrane and other connected work shall be carried out by the approved applicator of the manufacturing company of APP membrane.
M&L for applying one coat of solar reflective aluminium paint over 10cm in width or girth not otherwise described.
Suface excavation in soft soil n.exc 30 cm and averaging 15 cm deep
Excavating in post holes or similar holes each n.exc 0.5cum, getting out,returning, filling in and ramming earth or broken ruble mixed with earth around, in layers n.exc 25cm, watering, and remving surplus soil to a distance n.exc 50m and making good surface in hard/dence soil
M&L for PCC 1:2:4, type B1 using 20mm graded stone aggregate as in foundation filling and mass concrete for footings/bases of columns all as specified & directed.
M&L for removing excavated material (soil) to a distance not exc 50m and deposited where directed at a level n exc. 1.5m complete all as specified and as directed.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe 410-W (Gde- E- 250) quality- A all as specified and directed
M&L for plates (plain or chequered) channels, square cut or notched ( ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment
S&F bands, straps,clamps,cleats & small articles, supports or stays for rainwater,ventilating pipes, including bolts etc conforming to Fe-290 Gde-E-165.
S&F Mild steel screw bolts machine made with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut length exc 5cm but n.exc 10cm neck dia 5 to 10mm
S&F Pre- painted galvaume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
M&L for Pre- painted galvaume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridges, hip, valley gutters, drip and straight flashings with grade of zinc coating 275.(length and girth as fixed)
Earthwork excavation by mechanical means(Hydraulic excavator) over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in charge
M&L for Sand filling under floors or in foundations including watering and consolidation
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment all as specified and directed.
M/s BHOOMI ELECTRICALS
NAVREET CONSTRUCTION
SRI AYYAPPA ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .