Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.6 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹49.8 L+₹2.3 L (4.78%)Rejected-Finance | L2 | Rejected-Finance 2nd lowest bid |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
14 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SAUGOR
GE SAUGOR
PROVN OF REPAIR INSPECTION, HOT AND COLD ANCILLARY INCLUDING TOILETS UNDER GE SAUGOR
2022_MES_563269_1
GE/SGR/TOK-52 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
SAUGOR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER SAGAR
₹96,000
Yes
2 Jan 2023
16 Nov 2022
16 Dec 2022
16 Nov 2022
14 Dec 2022
2 Dec 2022
Amount
Excavation in trenches not exc 1.5 m wide and not exc 1.5 m deep in soft/loose soil and getting out complete all as specified and directed
Excavating over areas not exc 1.5m deep & getting out in soft / loose soil complete all as specified and directed
M&L for moorum/red bajri filling in floors or pavings, laid in layers not exc. 15 cm thick spread, levelled & rammed including watering complete all as specified and directed
M&L for broken stone or boulders hard core of gauge n.exc 63mm deposited spread and levelled in layers not exc 15cm thick watered and rammed to a true surface complete all as specified and directed
Removing excavated soil exc. 50m but not exc 100m & depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed
M&L for damp proof course to horizontal or vertical surfaces in cement concrete 1:2:4, type B-0 (using 12.5mm graded stone aggregates), 40 mm thick mixed with WPC including necessary formwork complete all as specified and directed. Note:-WPC shall be measured and paid separately
M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregates) mass concrete, foundation filling, etc., complete all as specified and directed
M&L for plain cement concrete type C-2, 1:3:6 (using 20 mm graded stone aggregates) as in sub base complete all as specified and directed
M&L for 25 mm thick PCC 1:2:4, type B1 (using 20 mm graded stone aggregates) as in sub base of floor to receive tiles or Kota stone complete all as specified.
M&L for RCC M-25 design mix (using 20 mm graded stone aggregates) as in foundation including rafts, footings, foundation beams, plinth beams and bases for columns complete all as specified and as directed.
M&L for RCC M-25 design mix (using 20 mm graded stone aggregates) as in columns complete all as specified and directed.
M&L for RCC M-25 design mix (using 20 mm graded stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed
M&L for RCC M-25 design mix (using 20 mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed .
M&L for RCC M-25 design mix (using 20 mm graded stone aggregates) as in chajjas complete all as specified and directed .
M&L for mild steel "TMT" bars 10mm dia and over in reinforcement, cut to length, bent to shape required including crnaking, bending sprially for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed ..
M&L for mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed .
M&L for mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed .
M&L for form work as use and waste to sides & soffits of plinth beam and sides of footings getting rough finished surfaces of concrete complete all as specified and directed
M&L for form work as use and waste to sides of columns getting rough finished surfaces of concrete complete all as specified and directed
M&L for formwork as use and waste to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. fair finished surfaces of concrete flat complete all as specified and directed.
M&L for formwork as use and waste to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; n exc. 200m thick (Horizontal or sloping) fair finished surfaces of concrete flat complete all as specified and directed
M&L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed
M&L for brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed
M&L for rendering 5mm thick on fair faces of concrete surfaces in CM (1:3) in ceiling complete all as specified and directed.
M&L for two coat cement plaster ,first coat 10mm thick CM 1:6 and second coat cement plaster 5mm thick in CM 1:4 with WPC finished even and smooth without using extra cement complete all as specified and directed. Note:-WPC shall be measured and paid separately under respective item)
Supply only integral waterproofing compound complete all as specified and directed
M&L for applying three coats of white wash on new wall surface including preparation of surface complete all as specified and directed.
M&L for coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.11 sqm and not exc. 0.18 sqm (400mm x 400mm joint free (rectified) ) as in floor set & jointed in neat cement slurry and pointed in white /coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed
M&L for glazed ceramic tiles of size 600mmx 300mm x 7 mm thick,(joint free (rectified)) coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match laid over 15 mm thick rendering in CM 1:4 complete all as specified and directed
S&F GI tubing `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 15mm bore complete all as specified and directed.
S&F GI tubing `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 20mm bore complete all as specified and directed.
S&F CP Bib taps 15 mm bore, cast copper alloy Fancy type with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F 15mm bore stop cock CP fancy type with butter fly handle, screwed down, high pressure for iron pipes or for unions (weight not less than 400gms) complete all as specified and directed.
S&F stop valves/angle valve 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.
S&F ball PVC valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.
S&F CP Pillar taps 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position 1000 Ltrs Capacity complete all as specified and directed
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed
S&F PVC (SWR) pipes 110mm bore single socketed in any length with adhesive joints fixed to walls with mild steel clamps of suitable size complete all as specified and directed
S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed.
S&F PVC (SWR) pipes 110mm bore single socketed, in any length with adhesive joints laid in trenches or in floors complete all as specified and directed
S&F PVC Bends any radius 110mm dia provided with access door complete all as specified and directed
S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia complete all as specified and directed.
M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed
S&F soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed
S&F CP fancy type Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S&F 125 mm size brass chormium plated shower rose with long body including fixing to steel pipe or union complete all as specified and directed.
S&F vitreous China bowl urinal angle back of size 430 x 370 x 340 mm white (min.), with grating & union for discharge pipe including waste pipe (excluding flushing cistern, flush pipe ) complete all as specified and directed
S&F vitreous China wash basin, white, flat back, size 550mmx400mm including 32mm size brass waste coupling,waste pipe and brackets complete all as specified and directed
S&F vitreous China squatting pan, 'Orissa' pattern, size 580mm X 440mm white, with integral foot rests incl flush pipe, provn of lime concrete bedding complete all as specified and directed
S&F PVC valveless, syphonic action type, flushing cistern (dual 5/10ltr capacity), low level, white, with intel, ball valve, float , handle and flush pipe 32mm bore,and brackets complete all as specified and directed
M&L for reinforced concrete pipes 150mm bore, class NP2 , laid and jointed complete with socket and spigot joint and sealed complete all as specified and directed
M&L for concrete bed of PCC 1:3:6 type C2 using 40mm graded stone aggregate for NP2, 150mm bore bedding and hanching completely after pipes are laid, jointed and tested complete all as specified and directed
M&L for cutting chases, pinning in, in brick/ stone wall making good to facings where required and pointing in cement mortar 1:3 or P. C. C 1:2:4 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring insert sheet in wall. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed.
S&F factory made Solid PVC prelam Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet single side prelam PVC sheet wood grain printed used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube complete all as specified and directed
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 4mm thick moulded PVC sheet prelam on the front face & 4mm prelam PVC sheet on back face, supplying & fixing in frame centre core will be PVC battern complete all as specified and directed
S&F mild steel door shutter with MS angle iron shutters frame 35 mm X 35 mm X 5 mm in two panel covered with 1.25 mm thick MS plain black sheet welded to shutter with 2 Nos sliding door bolt of 16 mm dia 300 mm long with locking arrangement, 2 Nos of tower bolt of 200 mm longincluding MS angle iron frame 40mm x40mmx 5mm as in chowkhat with 6 Nos hold fast of flat iron 30mm X5 mm ,200 mm long with bottom flat iron of size 30mmx5mm and 100 mm size 4 Nos butt hinges including necessary cutting, welding, binding as required with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and as directed. [Single shutters of approx width0.8 to 1.2 m and ht 1.9 to 2.10 M.]
M&L for two coats of synthetic enamal paint over a coat of red oxide primer on steel surfaces over 10cm width or girth incl preparation of new surfaces complete all as specified and directed
S&F aluminium anodised barrel tower bolts of extruded section, length of bolt in 150 mm complete all as specified and directed
S&F aluminium handles 150mm size, cast type, anodised complete all as specified and directed
S&F butt hinges of 100 mm size, Medium weight, stainless steel and fixed complete all as specified and directed
S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frusted glass and half portion will be fixed with louvers with 4mm thick frusted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }
M&L for precast reinforced cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed .
M&L for PCC in surface channels and drains type B1, 1:2:4 (using 20 mm graded stone aggregates) complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate laid in panels incl finished even and smooth with using extra cement as in plinth protection incl necessary form work to edges and filling of joints with bituminous sealing compound complete all as specified and directed.
M&L for machine pressed precast cement concrete coloured chemically treated interlocking paver block any shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment etc over and incl 40 mm thick uniformly levelled surface of stone dust cushioning including PCC 1:2:4 type B-0 as in coping all around of size 150 x100 mm thick complete all as specified and directed
M&L for cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregates) as in coping ,benching in man holes or similar work complete all as specified and directed
M&L for applying three coats of white wash on new ceiling surface including preparation of surface complete all as specified and directed.
M&L for provn of water proffing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/sqm comprising with following items and all as specified as under:-
(a) The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed. (b) M&L for rendering 10 mm thick in cement mortar 1:4 mixed with and including water proofing compound @ 3% by weight of cement applied over roof slab complete all as specified and directed. Note:-WPC shall be measured and paid separately (c) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated. (d ) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm (e) Laying of water proofing teratment of weight not less than 3 Kg / sqm APP modified polymeric water proofing membrane composed of 100 micron (+10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc. (f) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane (g) Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed at site
Excavating over areas, exc 1.5m but not exc 3.0m deep & getting out in soft / loose soil complete all as specified and directed
M&L for approved earth filling in floors or pavings, laid in layers not exc. 15 cm thick spread, levelled & rammed including watering complete all as specified and directed
M&L for PCC 1:4:8, Type D2 (using 40 mm graded stone aggregates), 100mm thick, as in sub base complete all as specified and directed
M&L for formwork to chullah hoods, chajjas, troughs & similar items including edges fair finished surfaces of concrete flat complete all as specified and directed.
M&L for PCC 1:2:4, type B-1(using 20mm graded stone aggregates) 100mm thick, surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for applying two coats of acrylic distemper, white or tinted over a coat of wall primer Birla / J. K. wall care white putty 1mm thick for levelling the surfaces on new wall surface including preparation of surface complete all as specified and directed.
M&L for preparation of new surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
M&L for mirror polished machine cut Kota stone slab flooring 18mm to -20mm thick laid over and including 15mm thick screed in CM(1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.
M&L for Kota stone slab 12mm to 15mm thick in skirting laid over and including 15mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.
S&F steel window with side hung shutters with glazing bars devetailed or welded, fixed on and including pressed steel frame of size 80mm x 40mm x 1.25mm thick CRCA profile section with box type hinges, steel handle, steel peg stay etc complete all as specified and directed.
S&F steel window with side hung shutters without glazing bars and fixed to steel frame complete all as specified and directed.
S&F galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed.
S&F framed work such as grills gratings, sunshed cover fixed with nut bolts incl,cutting drilling holes etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster, walk ways, railings, framedwork or water tanks and similar work conforming to Fe 290, Gde E 165 complete all as specified and directed.
S&F 1.00 mm thick of laths push and pull type Steel rolling shutters without ball bearing ,as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated complete all as specified and directed.
S&F safety lever locks mild steel with 4 levers for rolling shutter complete all as specified and directed.
M&L for screwing existing steel tubing for altration or additions or lengthening screw on pipe to form conectors of any size GI tubing complete all as specified and directed
Cutting existing GI tubing for alterations ,screwing existing tube size of 40 mm and 50 mm dia for new connection including earth work and clamp, neccessory fitting as per site required.
M&L for forming 12mm thick & 100mm deep expansion joints filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade ‘B’ complete all as specified and directed
M&L for PCC 1:2:4, type B0 (using 12.5mm graded stone aggregates) as in coping and the like including weathering , slightly rounded or chamfered angle with and incl necessary use and waste of form work complete all as specified and directed
M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds, mitered /stopped ends complete all as specified and directed
M&L for concealed point wiring for the following with 1.5 Sqmm PVC-FR insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and directed:-
For one light, fan point controlled by one switch
For one 5 Amp independent socket point controlled by one switch
For one 3 pin ,5 Amp socket point with other switch on the same board
All as per Srl item No 94 here in before but for power point wiring using with 2.5 sqmm PVC-FR LS insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead -ditto-
S&F Modular switch, one way, 6 Amp 230V, 1 module complete all as specified and directed.
S&F socket Modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed.
S&F switch Modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed.
S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed.
S&F ceiling rose, surface backlit,three terminal complete all as specified and directed.
S&F testing and commissioning of MCB SP 6-32 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed.
S&F testing and commissioning of MCB SPN 32-63 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed.
S&F sheet metal enclosure DB double door, IP-43 when MCBs to be used SPN, 8 way, 230 V with 200 Amps rated bus bar of suitable size complete all as specified and directed. .
S&F LED TL fitting 20 watt for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness complete all as specified and directed.
S&F box type LED optic fitting 1x9 Watt 2 feet box type complete .all as specified and directed.
S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep metallic body with all accessories including making hole in stone /brick wall grouting &making good in all aspects complete all as specified and directed. Make -Bajaj frehee 300/CG Trans Air 12"/Havells Ventil Air-DS
S&F exhaust fans AC single phase 230/ 240 V of size 250 mm sweep PVC body with lovers complete all as specified and directed. Make -Havells cat part no Ventil Air -DX White/Bajaj MAXIMA DX/Crompton Ventilus10ʺ
S&F LED Bulk head designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed.
S&F electric water heater (Geyser) ISI marked 50 Ltrs capacity AC 230V, 5 star rating Branded heavy duty automatic cutoff and including electric connection lead of suitable size and length,pvc pipe and all accessories, grouting of nut bolt/fastner on wall and making good disturbed surface complete all as specified and directed.
Supply and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 16 sqmm 2 core complete all as specified and directed.
M&L for sand cushioning in trenches for the cable complete all as specified and directed.
Returning filling, spreading, leveling, watering and well ramming in layers n. exc 25 cm thick complete all as specified and directed.
M&L for kiln burnt bricks sub class 'B' old size laid in trenches for cable protection complete all as specified and directed.
S&F in replacement of GI pipe light grade 40mm bore ISI marked on pole on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers) complete all as specified and directed.
M&L for provn of earthing complete with MS galvanized earth plate electrode 600x600x6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below normal GL) with top edge of plate not less than 1.5 M below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of CI or steel incl excavation, PCC (1:3:6) type C-1 chamber with CI cover 10 mm thick, 15 mm dia light grade , GI protection pipe, funnel with wire mesh, watering pipe of size 20 mm dia, medium grade, lugs, main earthing lead upto main switch/DB incl charcoal dust, salt etc all as shown in electrical plate No. 3 of SSR part-I 2009 specification complete all as specified and directed.
S&F air circulator fans 230 volts single phase oscillation 450mm sweep suitable for wall mounting complete all as specified and directed Make- Havells/Bajaj/CG
S&F ceiling fan 1200 mm sweep metallic white colour with BEE rated, single phase connected with suitable wire complete all as specified and directed. Make - Havells ES Neo/Crompton HS Plus/Bajaj Electra 50.
S&F exhaust fans AC single phase 230/ 240 V of size 450 mm sweep mettalic body with all accessories including making hole in stone /brick wall grouting &making good in all aspects complete all as specified and directed. Make-Havells/Bajaj/CG
S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed
S&F double door metallic sheet metal enclosure DB double door(DPX-125 ) VTPN suitable for housing 125A MCCB as incomer 4 Way 415 Volts with 200 Amps rated bus bar complete all as specified and directed
S&F MCCB 125 Amps 4 pole, 415 V 16 KA complete all as specified and directed .
S&F MCB TPN 40 Amps, 240 V, 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and as directed.
S&F sheet metal enclosure DB double door, IP-43 when MCBs to be used SPN, 4 way, 240 V with 200 Amps rated bus bar of suitable size complete al as specified and as directed.
M&L for concealed sub main wiring with 4 single core PVC insulated, sheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm drawn in and incl PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated, sheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green
M&L for concealed sub main wiring with 2 single core PVC insulated, sheathed copper conductor stranded 1100 volt grade cable of size 4 sqmm drawn in and incl PVC rigid conduit medium grade of size not less than 20 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated, sheathed copper conductor stranded 1100 volt grade cable of size 4 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green
Supply and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 70 sqmm 3.5 core complete as specified and directed.
S&F GI pipe light grade 50 mm dia ISI marked on pole on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers) complete all as specified and directed
v k builder
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .