Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.5 LAccepted-AOC 00 BHADAR TIKARMAFI BAZAR SULTANPUR UTTAR PRADESH 227413 | AMETHI | UTTAR PRADESH | 227413 | L1 | Accepted-AOC Being a lowest bidder and reasonable rate quoted | |
| 2 | L2₹26.3 L+₹97,291.42 (3.84%)Rejected-Finance BHAVANI KRUPA GANDHI CHOWK NAGPUR | NAGPUR | NAGPUR | MAHARASHTRA | 442302 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹26.9 L+₹1.6 L (6.20%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹27.0 L+₹1.6 L (6.37%)Rejected-Finance BHAWANI KRUPA GANDHI CHOWK PULGAON | PULGAON | WARDHA | MAHARASHTRA | L4 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
5 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PULGAON
GE PULGAON CAD CAMP
MISC B R REPAIRS TO CERTAIN GUARD POST, WATCH TOWER INSIDE DEPOT PERIMETER AREA AT CAD PULGAON
2022_MES_544265_1
9041/PUL/E8
Open Tender
Civil Works
Item Rate
270 days
GE PULGAON
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE PULGAON
₹50,000
Yes
3 Nov 2022
9 Aug 2022
12 Sept 2022
9 Aug 2022
5 Sept 2022
24 Aug 2022
9 Aug 2022 - 23 Aug 2022
Amount
Taking down chowkhat or frame with shutter (without taking out shutter from the frame) n.exc 1.5 sqm each complete all as specified and as directed .
All as per item No. 1.00 but exc 1.5 sqm and n.exc 4 sqm each
Taking down shutters of any description n.exc 1 sqm each complete all as specified and as directed .
All as per item No 3.00 but exc 1 sqm and n.exc 2 sqm each
S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm thick single side prelam PVC sheet used and edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete.
S and F factory made solid panel PVC door shutter 30mm thick [style] consisting of a frame made out of MS tubs for top and bottom rails,MS frame shall be covered with heat molded single side prelam PVC `C` channel having a PVC steel strip of 20mm width stuck inside with solvent cement for styles and single side prelam PVC sheet for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Panneling single side prelam PVC sheet used and stile & rails having one side feathered edge and on other side 10 mm 90 degree bent edge suppling & fixing in the frame at site as per pecification & drawing.
S&F second class hardwood plain, solid, straight chowkhat & frames, wrought, framed ribbeted on the solid, rounded or chanfered, put together with glue pinned at joints complete all as specified and as directed .
Providing precast cement concrete type B0 1:2:4 (12.5mm graded stone aggregate) ,set in cement mortar 1:6 louvres and jallies for ventilators,25mm thick (measured solid), including all mouldings complete all as specified and as directed .
S&F 35 mm thick 2nd class Hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, guaze, etc (with sash bars), edge of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. size of members as specified in SSR part -I complete all as specified and as directed .
S&F 30mm thick 2nd class Hard wood factory made glazed and skeleton window shutters, open rebated and prepared to receive glass, guaze, etc ( with sash bars ), edge of framing plain, chamfered or rounded fitted with cut and mitred beads foe securing glass, etc. size of members as specified in SSR part -I complete all as specified and as directed .
S & F factory made plain framed, panelled shutters 2nd Class Hard Wood (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed .
S&F 100mm size MS butt hinges medium weight colled rolled, meted steel fixed with welding to existing MS preesed steel chowkat/shutter complete all as specified and as directed .
S&F 75mm size MS butt hinges medium weight colled rolled, meted steel fixed with welding to existing MS preesed steel chowkat/shutter complete all as specified and as directed .
S&F 150 mm size extruted aluminium alloy handles fabricated type anodised and fixed complete all as specified and as directed .
S&F 125 mm size extruted aluminium alloy handles fabricated type anodised and fixed complete all as specified and as directed .
S&F 200 mm size aluminium anodized barrel tower bolts of extruted section and fixed complete all as specified and as directed .
S&F 150 mm size aluminium anodized barrel tower bolts of extruted section and fixed complete all as specified and as directed .
M&L for 300mm aluminium alloy anodised sliding door bolts with hasp, staple and fixing clip of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast- aluminium alloy complete all as specified and as directed .
M&L for 250mm aluminium alloy anodised sliding door bolts with hasp, staple and fixing clip of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast- aluminium alloy complete all as specified and as directed .
S & F in repair 300mm, Mild Steel ordinary rat tail rod pattern springs for door including roller and roller plate complete all as specified and as directed .
Fixing only in repairs 300mm, Mild Steel ordinary rat tail rod pattern springs for door including roller and roller plate complete all as specified and as directed .
M&L for bends, straps , support or stagged, hold fast & similar small articles confirming to Fe-290 grade E-165 complete all as specified and as directed .
M & L for Preparing surface of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and as directed .
M & L for Providing, cement concrete type B1,1:2:4, (20mm stone aggregate ) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and hold fast ,railings upto 60 cm in height copings, (20mm stone aggregate) kneelers, apex stones,bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed .
S&F in repairs 3mm thick glass ordinary and quality and glazing with oil putty or wooden bedding all as specified not exc 0.5 sqm in each pane including hacking out old broken glass metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.
S&F 3mm thick glass ordinary and quality and glazing with oil putty or wooden bedding all as specified not exc 0.5 sqm in each pane
S & F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed .
M&L for preparation of newly or previously untreated steel surfaces of any description over 10 CM in width or girth, not otherwise described and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S &F for stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.4mm and fixed with stanless steel stepple to wooden / steel frames all as specified and directed but fixed in repairs
S & F in repairs for stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.4mm and fixed with stanless steel stepple to wooden / steel frames all as specified and directed but fixed in repairs
M&L for preparation of new wood surfaces and applying two coat of Synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and as directed .
M & L for preparation of new wood Surfaces of any description wood, steel, iron, concrete, brick, stone, etc.applying one coat of Black Bituminius Paint on wooden chowkats or frame Paint exceeding 10cm in width or girth complete all as specified and as directed .
M & L for preparation of new wood Surfaces of any description wood, steel, iron, concrete, brick, stone, etc.applying one coat of Black Bituminius Paint on wooden chowkats or frame Paint n.exc 10cm in width or girth complete all as specified and as directed .
S & F in repair Floor door stopper overall length of cover plate 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor complete all as specified and as directed .
Dismantling floor, hearth or wall tiling including cement morter bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed .
M & L for Vitrified Ceramic tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors over 15 mm thick cement screed bed in cm 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M & L for joint free Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured ement to match in floors over 15 mm thick cement screed bed in cm 1:6 complete all as specified and as directed.
M & L for glazed coloured ceramic tiles 350x250x7mm/450x350x7mm thick as in vertical surfaces such as skirtings, dado riser to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 cm thick plaster in CM1:4 complete all as specified and as directed.
Demolition of cement concrete in ground floors and pavings nexc 15cm thick (below or above ground level) un-reinforced complete all as specified and as directed .
Material and labour for 75 mm thick PCC 1:3:6 type C2 using 20 mm graded stone aggregate as in plinth protection layer in by finished even and smooth without extra cement etc complete all as specified and as directed .
Dismantling timber scantling 40 Sq cm and over in section, in any position complete all as specified and as directed .
M&L for 2nd class hard wood cleaned swan as in scantling complete all as specified and as directed .
Taking down cement plaster of any description on brick or stone wall etc including racking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.
M&L in repairs 5 mm thick plaster in CM (1:4) on concrete surfaces finished even and smooth using sagol finish on ceiling complete all as specified and as directed .
Material and labour for rendering 15 mm thick in CM 1:6 on stone masonary including finishing the surface even and smooth without using extra cement as specified and directed.
Material and labour for rendering 15 mm thick in CM 1:4 on stone masonary including finishing the surface even and smooth without using extra cement as specified and directed.
Preparation of new plastered or unplastered surfaces of wall and applying two coat of white wash including cornices all as specified and directed .
Preparation of new plastered or unplastered surfaces of ceiling and applying two coat of white wash including cornices all as specified and directed .
M&L for preparation of surfaces and applying two coat of cement base paint over a coat of white cement on wall complete all as specified and as directed .
Raking out joints/pointing to random rubble uncoursed stone masonry all as specified and directed complete all as specified and as directed .
Material and labour 15mm thick raised pointing to random rubble uncoursed stone masonry in CM 1:4, uncourses or brought upto coursed complete all as specified and as directed .
Disconnecting existing PVC water tanks of any description, of capacity exc 250 &n exc 500 litres., setting aside for cleaning and removing all scale and dirt, etc from tanks and from mouth of pipe etc, and hoisting if required, reconnecting and refixing in position complete all as specified and as directed .
S & F in repair Rotational moulded polythylene water storage tanks three layered capacity 500 litres (cylinder vertical with closed top) hoisted and fixed in position all as specified in SSr Part I including dismantlling complete all as specified and as directed .
S&F in repair vitreous china water closet size 580x 440mm white (Orrisa Pattern) complete including provision of cement concrete bedding with integral foot rests with 110mm PVC P trap and WC connector with lip ring complete all as specified and as directed.
S&F Aluminum anodised tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and as directed.
S&F in repair of white PVC low level flushing cistern 10 ltrs capacity make ISI incl all internal fittings inlet outlet pipe connections etc including 32mm pipe complete all as specified and as directed.
Material and labour for Flush pipe of polyethylene of low or high density or PVC. 32 mm dia for low level cistern complete all as specified and as directed.
S&F Bib taps in repairs fancy type chromium plated 15mm dia cast copper alloy with capstan heads, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.
S&F in repair Bib taps 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight-90 gms) complete all as specified and as directed.
S&F in repairs PVC connection 60cm long 15mm dia with 2 nos CP brass check nuts fixed in repairs complete all as specified and as directed.
S&F in repairs looking mirror in repairs of size 600mmx 450 mm approved quality and make , mounted on 6 mm thick pl wood commercial as backing and PVC capping on adges complete asdirected by Engr-in-charge fixed with wooden plugs in wall with CP brass service & cap washers complete all as specified and as directed.
S&F in repairs stop valves fancy type chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs complete 15mm dia complete all as specified and as directed.
S&F in repairs ball valve bore dia of pipe in 20mm high pressure of PTMT, with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.
M&Lfor cast iron floor/Nahani trap with grating 100 mm dia including jointing to waste pipe in run lead including removing old traps complete all as specified and as directed.
Taking up or down down 15mm steel tubing and connections including cleaning for refixing or removal of store complete all as specified and as directed.
Taking up or down down 20mm steel tubing and connections including cleaning for refixing or removal of store complete all as specified and as directed.
Supplying and laying of 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.
Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.
Fixing only 15 mm dia GI tubing medium grade with all fittings and framed complete in canceled pattern in wall, floor etc. complete all as specified and as directed.
Fixing only 20 mm dia GI tubing medium grade with all fittings and framed complete in canceled pattern in wall, floor etc. complete all as specified and as directed.
S & F in repairs 20mm dia Harrison rails, mild steel chromium plated curtain rods with fixing brackets, stops etc fixed in repairs including taking down old one all as specified and directed including brackets
Demolition of cement Concrete(unreinforcement) is ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
Demolition of brick or stone masonry built in cement mortar including walls all quions, arches, pillars and coping etc complete all as specified and as directed.
M & L for Cement concrete type D2, 1:4:8 (40mm graded stone aggregate) as in foundations,filling and mass concrete complete all as specified and as directed.
M & L for Cement concrete type B2, 1:2:4 (40mm graded stone aggregate) as in foundations,filling and mass concrete complete all as specified and as directed.
Material and labour PCC 1:2:4 Type B2 using 40mm graded stone aaggregates 150 mm thick as in floor,pavings etc laid in bays finished even and smooth without using extra cement complete all as specified and as directed.
M & L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.
M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed.
M&L for Rendering 10mm thick in CM (1:4) on fair faces of brick work or concrete surfaces as in wall finished complete all as specified and as directed.
M/s Dara Constructions, Pulgaon
Shree Constructions
M/S JAI BHAWANI CONSTRUCTIONS
Bidder Name
Shree Constructions
M/S DEV ENTERPRISES
M/s Dara Constructions, Pulgaon
M/S JAI BHAWANI CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .