Annual repairs of Section Officers quarters at Avani Village in Mulbagal Taluk. (Reserved for SC)/Call-2

Annual repairs of Section Officers quarters at Avani Village in Mulbagal Taluk

19.61 Dismantling weather proof course and removing and conveying the debris to a distance to the appropriate disposal area as per direction of Engineer-in-charge. ---- With all leads and lifts cos... 6.54 m³

2.3.1 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars... 6.54 m³

2.1.6 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ... 0.64 m³

19.55 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per directi... 132.15 m²

6.8 Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse ... 0.34 m³

8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and r... 197.32 m²

8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removi... 13.96 m²

8.6.1 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever require... 11.07 m²

19.2.1 Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. ---- With all leads and lifts cost and... 6.75 m³

9.21.1 Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all co... 64.27 m²

10.14 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre... 8.19 m²

7.16 Providing & fixing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement: 4 coarse sand) mixed with... 5.91 m²

8.63 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications and as per directions of Engineer in... 278.78 m²

8.33.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of... 117.75 m²

12.54 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 15... 5.40 m

12.55.1 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr... 1.62 m²

12.21 Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per ... 1.26 m²

12.61 Providing and fixing chromium plated brass night latch of approved quality

including necessary screws etc. complete. ---- With all leads and lifts cost and conveyance of all materials, cost of labour,... 2.00 No.

12.62 Providing and fixing chromium plated brass handles of 100/125 mm with

necessary screws etc. complete ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire ch... 2.00 No.

12.68.2 Providing and fixing ISI marked M.S. pressed butt hinges bright finished

with necessary screws etc. - 100x58x1.9mm ---- With all leads and lifts cost and conveyance of all materials, cost of labour, c... 8.00 No.

12.72 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Bar- rel type) with necessary screws etc. complete : ---- With all leads and lifts cost and conveyance of all materials, cost of... 8.00 each

13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the... 50.00 m

13.6.1 Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha... 1.00 each

13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ... 1000.00 L

10.9.1 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 25 mm dia PVC Elbows ---- With all l... 10.00 each

10.10.1 Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 25 mm dia PVC Tee ---- With all leads an... 4.00 each

261 cuddapah slab 2.5cm thick (pwd vol 2 building SR page no A 19, item no 261) ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipm... 6.25 Cum

Sl No 331 Page No A-22 Float glass panes of nominal thickness 8 mm (weight not less than 20.00

kg/m2) ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equ... 8.64 Sqm