Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.5 LAccepted-AOC H NO 82 C BLOCK NO CC SHALIMAR BAGH DELHI 110088 | DELHI | NORTH DELHI | DELHI | 110088 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹41.7 L+₹7.0 L (20.1%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹42.4 L+₹7.7 L (22.2%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹46.3 L+₹11.7 L (33.6%)Rejected-Finance 83 5M 1 SHIV GANGA PURAM YADAVPUR ROAD UMARPUR NEEWAN PRAYAGRAJ 211011 | PRAYAGRAJ | UTTAR PRADESH | 211011 | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹46.5 L+₹11.8 L (34.2%)Rejected-Finance 705 646 MALVIA NAGAR ALLAHABAD UP PIN 211003 | PRAYAGRAJ | UTTAR PRADESH | 211003 | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
16 Jan 2023, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Bamrauli
GE (AF) Bamrauli
PROVN OF WEATHER PROOF PAINT IN OMQs AT NORTH CAMP AND OTHER SANCTION WORKS UNDER GE (AF) BAMRAULI
2022_MES_568291_2
8756/E8
Open Tender
Civil Works
Works
180 days
GE (AF) Bamrauli
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (AF) Bamrauli
₹99,000
Yes
9 Feb 2023
9 Jan 2023
17 Jan 2023
9 Jan 2023
16 Jan 2023
10 Jan 2023
Amount
Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., all as specified and directed.
Demollition of Cement concrete (reinforced) in roof, floors( other than ground floor), beams staircases, landing, chajjas and similar suspended works all as specified and as directed.
M&L for rendering 15mm thick on faces of brick work or concrete surfaces finished even and smooth without using extra cement in CM 1:4, all as specified and directed.
M&L for rendering 5 mm thick on ceiling surfaces of brick work or concrete surfaces finished even and smooth without using extra cement in CM 1:3 as in ceiling, all as specified and directed.
M&L for rendering 10 mm thick on ceiling surfaces of brick work or concrete surfaces finished even and smooth without using extra cement in CM 1:3 as in ceiling, all as specified and directed.
Supply only water proof compound complete all as specified and directed.
M&L for wall care putty 1.50mm thick (to achieve smooth surface) for new plaster surface complete all as specified and directed.
M&L for wall care putty ceiling surface 2 mm thick (to achieve smooth surface) for new plaster surface complete all as specified and directed.
M&L for Complete removal of existing treatment on wall surface and applying wall care putty white 1.50mm thick (to achieve smooth surface) complete all as specified and directed.
M&L for Complete removal of existing treatment on ceiling surface and applying wall care putty white 3 mm thick (to achieve smooth surface) complete all as specified and directed.
M&L for finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) approved shade of colour complete all as specified and directed.
S & F formwork to chullah hoods, chajjas and similar works including edges all as specified and directed.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
M&L for Reinforcement cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate for chajjas all as specified and directed.
Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames). all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each. all as specified and directed.
S&F Aluminium (powder coated) frame for sliding windows, side hung windows and ventilators with necessary joining cleats, fastner etc to fix in existing opening complete Notes : (i) Thickness of powder coating (epoxy polyster) shall not be less than 50 micron. (ii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE. (iii) Gaps between frame and masonary/cill/lintel to be filled with silicon gel for water tightness. (iv) Rates quoted includes making good of jambs, soffits and cills etc. (v) Aluminium section shall be as per drg No. CE/ALD/TD-194 sheet No. 1/2 & 2/2. However size of frame shall be per actual site requirement.
S&F Aluminium (powder coated) sliding glazed shutter in three track one jallie and two glass of suitable size with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and locking arrangement at both end all as specified and as shown and drawing. Notes : (i) Glass filling in panels to windows shall be measured and paid for separately under respective item of this schedule as supply only (ii) Thickness of powder (epoxy polyster) coating shall not be less than 50 micron (iii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE. (iv) Frame shall be measured under respective item of this schedule. (v) Aluminium section shall be as per drg No. CE/ALD/TD-194 sheet No. 1/2 & 2/2
S&F Aluminium (powder coated) window and ventilator shutters, side hung type, without sash bars, aluminium section weighing not less than 0.55 Kg/Metre including clips, rubber packing aluminium snap beading, screws, fittings (each shutters) such as peg stays 150 mm long, hinge type B-21 100 mm long (2 Nos), 150mm long D type handle (one number) and tower bolt 150mm long (one number) (Notes : (i) Glass panels to windows/ventilator shall be measured and paid for separately under respective item of this schedule as supply only. (ii) Thickness of powder (polyster) coating shall not be less than 50 micron. (iii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE. (iv) Frame shall be measured and paid for separately under respective item of this schedule. (v) Quoted rate shall deem to included cost of alumiumum powder coated builder hard ware.
S&F Stainless steel (Grade S-304) wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
Supply only 5.0 mm thick tint glass/pin head type for aluminium ventilators / window etc. complete, all as specified and directed
S&F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors. complete all as specified and directed.
All as per item No.22 as above but 75mm bore. complete all as specified and directed.
S&F 110mm bore PVC (SWR) bends, of any radius provided without access door. complete all as specified and directed.
All as per item No. 24 as above but 75mm bore. complete all as specified and directed.
Demolition of brickwork built in any type of mortar, complete all as specified and directed.
M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises,
M&L for vitrified ceramic tiles 10mm thick dark shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid in floors set and jointed as per manufacturer's instructions Over & including screed bed or bedding layer 15mm thick in CM (1:6) complete.
All as per item No. 29 but skirting including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.
Demolition of concrete of any description and in any position not otherwise specifically provided for cement concrete reinforced.
M&L for 75mm thick cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection finished surface even and smooth without using extra cement complete all as specified and directed.
Dismantling PVC water tank and removing from the site capacity in ltrs exc500 & n.exc 1000 ltrs
M&L for rotational moulded polythelene water storage tank 1000 ltrs capacity double layer cylenderical vertical with closed top hoisted & fixed in position including all as spd & directed
M&L for preparation and writing letters or figures(Block, Roman, Italic or Indian) n exc 30 cm height on palster/concrete wall/path over coat of ACE as matching with existing pattern complete all as specified and directed.
Taking down up or down steel tubing 15mm bore and connection, incldg removal to store complete all as specified and directed.
Taking down up or down steel tubing 20mm bore and connection, incldg removal to store complete all as specified and directed.
S&F medium grade galvanished pipe with all fittings & fixed to wall and ceiling lain in floors, bore of pipe 15mm complete as spd and directed
S&F medium grade galvanished pipe with all fittings & fixed to wall and ceiling lain in floors, bore of pipe 20mm complete as spd and directed
Supply and fixing 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed
Supply and fixing 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed
S&F Ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe 20mm bore or brass ferrule
Preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of primer including balance area complete removal.
M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide priming complete all as specified and directed.
M&L for preparation of old painted surfaces of wood and wood based materials of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old decorated surfaces of wall including cornice etc and applying one coat oil bound distemper complete all as specified and directed.
Supply, installation, testing & commissioning of Tripod Chemical Earthing (i.e Three chemical earthing are individually connected in Delta from through copper strip) which include. (i) Three Nos 3000 mm long 50 mm dia copper bonded rod with top removal compound filling cap, seepage holes, stainless steel fasteners, HDPE Lockable earth pit cover cum inspection chamber alog with 150 Kg of Earth Enhancement Back fill compound including digging of pits (ii) Coper earthing strip 25x3mm for interconnection of all three pits alongwith GI light grade protection pipe 32 mm dia of all three pits along with necessary clamps, nut bolts and brazing work. (iii) Any other accessories including design modifications, to achieve the required earth termination rod resistance value below 1 ohms or as per the OEM / International Standard recommendation.
S&F down conductor ISI marked 35 Sq mm PVC insulated copper flexible wire including both end termination, suitable size cable clamps, copper thimbles, nuts bolts etc. Test point to the Earth pit terminal.
S&F test point terminal block made of gun metal or phosphorus bronze size 75x75 25 mm drilled and screwed including 3 Nos, 8 mm dia 25 mm longhex head copper screw complete all as specified and directed.
S&F earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc. As required but 20x3mm copper strip complete all as specified and directed
Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items of this schedule. The same shall be recovered from various payment to contractor before handing over old material.
M.R. ENTERPRISES
M/s M A Traders
chauhan construction
M/S V K MEHROTRA
M/S SATISH KUMAR
HIMANSHU TRADERS
Toshi Enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .