Installation of oxygen generation plant with capacity of 300 LPM at 200 bedded hospital GMC Kathua

MEDICAL GAS PIPELINE SYSTEM Providing, installation, testing and commissioning of Medical Grade Copper Pipelines along with saddles, M.S. Supports, supporting tray, tees, reducers bend etc. of different size as mentioned below as per the requirement. The copper pipes used will be solid drawn, seamless, deoxidized, non-arsenical, half hard, tempered and degreased, manufactured as per CU DHP to 1190-1 and CW 024A to EN 1412.

28mm outer dia, 1.0 mm thick

22 mm outer dia, 1.0 mm thick

ISOLATION VALVES: Providing and fitting of Isolation Valves of different size i.e 28mm, 22mm, as per requirement. The complete job includes cost of material, labour charges involved and all taxes comply to 93/42/EEC medical grade devices EN 739 certified, confirming to HTM02/01/NFPA99.

Isolation Valve 28mm

Isolation Valve 22 mm

DIGITAL GAS MONITORING ALARM SYSTEM CE Marked: Providing, fitting and commissioning of Analog Medical Area Line Pressure Alarm System in plant room to detect the fault whenever there is deviation from the normal operating limits. It also includes mounting the Alarm System on the wall and then connecting it by means of Welding and brazing, providing of electric connection to alarm, valve on input supply to alarm system. The rates include cost of material, labour charges involved and all taxes having 1 service, services as per requirement. The rates are including cost of material, skilled /unskilled labour charges tool, tackles, hire charges, including transportation costs and other miscellaneous charges etc.

MEDICAL AREA VALVE BOX SERVICES UNIT CE Marked comply to 93/42/EEC medical grade devices EN 739 certified, confirming to HTM02/01/NFPA99: Providing and fitting of isolation Valve box of one service complete in all respects including gauges. The complete job includes cost of material, labour charges involved and all taxes having 1 service. The rates are including cost of material, skilled /unskilled labour charges tool, tackles, hire charges, including transportation costs and other miscellaneous charges etc.

Providing and fitting of Dry Powder type Fire Extinguishers (of capacity 6kg each) in the plant room for prevention of accidental fire hazardous. The rates are including cost of material, skilled /unskilled labour charges tool, tackles, hire charges, including transportation costs and other miscellaneous charges etc.

Providing and Installation of Servo Voltage Stabilizer of capacity 100 KVA along with Electrical aluminum armored cable from Source to Plant room 95mm2, 3.5 core copper armored cable(100m) to be laid with proper and study support to Voltage Stabilizer and then to DG set and control Panel. The complete job includes 01 no copper chemical earthing, bypass function switch (in case of AVR failure), input and output voltage parameters display functions, step less voltage adjustment, contactless voltage regulation, Phase failure, phase loss, over voltage and over current protections, The rates are including cost of material, skilled /unskilled labour charges tool, tackles, hire charges, including transportation costs and other miscellaneous charges etc.

Copper chemical earthing with Earth continuity strip of size 32x6 mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit /pipe or fixed to wall or any other indicated situation including insulator with bolt for fixing on wall as per site conditions. The rates are including cost of material, skilled /unskilled labour charges tool, tackles, hire charges, including transportation costs and other miscellaneous charges etc.

Supply and Installation of Cubical Type General Floor Distribution Panel Board Suitable for 415 volts, 3 Phase 4 wire 50 HZ AC Supply system including Incomers, Out Going, Bus Bar, interlocking, 01 no copper chemical earthing etc. Description Incomer 300 A 4 Pole Front Operated on and off switch. Three phase indicator Lamp RYB (01 No) Voltmeter - (01 Nos.) Ampere meter - (02 Nos.) MCCB 100Amps 4 pole- 02 nos. MCCB 32 Amps 4 pole- 02 nos . MCCB 16 Amps- 08 nos. for output. Panel have protection against earth fault, high voltage and low voltage, Enclosure for Distribution panel is single /double Door type front operated fabricated out of 14SWG MS sheet painted with two coats of primer and powder coated. The rates are including cost of material, skilled /unskilled labour charges tool, tackles, hire charges, including transportation costs and other miscellaneous charges etc.

Providing and laying of internal cabling for installation of machinery of 300 LPM plant from distribution panel to the compressor, dryer, oxygenator, auto drain valves, exhaust fans, etc. along with cabling tray and as per the machinery requirement. The rates are including cost of material, skilled /unskilled labour charges tool, tackles, hire charges, including transportation costs and other miscellaneous charges etc.

Providing and installation of 18’’ heavy duty industrial exhaust fans for proper ventilation of plant room. The rates are including cost of material, skilled /unskilled labour charges tool, tackles, hire charges, including transportation costs and other miscellaneous charges etc.

Providing and fitting of 1KVA UPS for uninterrupted power supply to oxygenator PLC. The rates are including cost of material, skilled /unskilled labour charges tool, tackles, hire charges, including transportation costs and other miscellaneous charges etc.

Providing and fitting of auto drain valves (electrically operated) required for draining moisture from air tank, inline filters etc. The rates are including cost of material, skilled /unskilled labour charges tool, tackles, hire charges, including transportation costs and other miscellaneous charges etc.

Fabrication and fitting of exhaust G.I ducting for air compressor of 300 LPM oxygen plant including suitable exhaust fan. The rates are including cost of material, skilled /unskilled labour charges tool, tackles, hire charges, including transportation costs and other miscellaneous charges etc.