Construction of Guard Chowki, Let Bath, Signages and Boundary Wall

Amount

Construction of Guard chowki

Earth work in excavation by mechanical means (Hydraulic excavator ) manual over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan ) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m disposed earth to be levelled and neatly dressed. All kinds of soil 1.6

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size.) 3.1.6

Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). 6.1.6

Providing and laying damp-proof course with cement concrete grade M-150(1:2:4) Mortar prepared with 1% solution of water-proof compound complete as per specification 75mm thick 3.7.2

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand ) 5.2.2

Half brick masonry in superstructure, above plinth level upto floor V level using bricks of designation 75 5.8.3

Centering & Shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. 4.10.2

Providing and laying in position specified grade of cement concretee for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 grade Nominal Mix / Design Mix . 4.2

Steel Reinforcement: Providing and fabrication reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding ( including cost of binding wire) all complete up to floor five level. (Original producers who manufacture billet directly from iron ores and rolll the bilets to produce steel conforming to IS:1786) Thermo-mechanically Treated bars (Conforming of relevent IS code ) (100 kg per cum of c.c.) 4.13.3

Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints complete fine finish : 20 mm thick 12.2.2

6 mm thick cement plaster to celling of mix 1:3 (1 cement : 3 fine sand ) 12.5

Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete. New plastered Surface (Three or more coats) 12.22.1

Distempering with dry distemper of approved brand and Shade ( two or more coats) and of required shade on new work, over and including, priming coat of whiting to give an even shade including all scaffolding.12.36

Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding. New work (Two or more coats applied @3.84 kg / 10 sqm) 12.41.1

Painting Applying priming coat. With ready mix pink or gray primer of approved brand and manufacture on wood work hard and soft wood. 12.45.1

Painting Applying priming coat. With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 12.45.3

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. 12.46.1

Supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4 Upto 15 cm thick. Window / D 6.18.1

Providing dab stone over chajjas duly fixed in cement sand mortar 1:6 complete . 50mm thick 6.16.2

Providing and fixing horizontal chajja of Red/ white sand stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 coarse sand ) including pointing in white cement mortar 1:2 ( 1 white cement : 2 stone dust ) with an admixture of pigment matching the stone shade. 6.15

Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. 1.25

Random rubble dry stone kharanja under floor. 11.26

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. M15 grade Nominal mix 1:2:4 ( 1 cement : 2 course sand : 4 graded stone aggregate 40 mm nominal size ). (flooring) 3.1.3

Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4(1 cement : 4 coarse sand ) for area of each slab from 901 to 2000 sq. Cm : 864.00 11.18.1

Providing and fixing 1st quality MAT & Glossy finished ceramic tile confirming to IS : 13755 and IS 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4 ) Size 250mm x 375 mm sqm 661.00 7.21.1

P&F 1st quality Heavy Duty vitrified Polished Digital tiles on floor, Skirting and steps etc. in different sizes ( thickness minimum 10 mm ) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick cm 1:4 including grounting the joints with white cement and matching pigment etc complete. Size 298 mm x 298 mm sqm 641.00 7.22.1

Grading roof for water proofing treatment with water proofing compound cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) 10.17.1

Providing & fixing precast cement concrete coping 1:2:4 mix 50 mm thick complete as per speification 3.8

Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure A 30 mm thick Decorative teak veneer one side 8.13.2.2

Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred welded and grinded including hold fast of steel lugs 13mm x 3mm and 15 cm long embedded in C C block 15 x 10 x 10 cm of 1 : 3 : 6 nominal concrete and including fixing of pivoted hinges of superior quality window shutters made out of 50 x 25.0 mm hollow steel section 15 mm paitam of 18 gauge thickness joint mitred and grinded including 10mm x 10mm square bars welded to frame for paitam fixing float glass 4mm thick panes with glazing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100 mm long, tower bolts 100 mm long of steel powder coated superior quality including fixing and jointed with frame hinges priming coat with steel prime complete in all respect as per direction of Engineer in charge window openable. 9.28.1

Providing and fixing in cm 1:4 double paitam (rebated ) stone door window and ventilator frames of approved quarry: Size 100 x 75 mm. 15.25.1

Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, shelves, sills counters, floors etc. laid on 12 mm (Av.) Thick base of cement mortar 1:3 ( 1 cement : 3 coarse sand ) jointing with white cement mortar 1:2 ( 1 white cement : 2 marble dust ) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Jhunjhunu / jalore ( red / choclate / black/ pink colour) Up to 1500 cm2 Tiles 1812.00 7.5.1

Supplying and fixing in walls machine cut and polished 6.17.1stone shelves, tands and in CM 1:3 with machine cut edges: Sand or other approved stone 25mm thick 6.17.1

Granite / kota Stone work Full Edge moulding 7.6.2

Construction of Let Bath

Earth work in excavation by mechanical means (hydraulic excavator) / manual means over areas (exceeding 30 cm in depth. 1.5m in width as well as 10 sum on plan) including disposal of excavated earth, lead upto 50m and all lift upto 1.5m disposed earth to be levelled and neatly dressed. All kind of soil. B-1/ 1.6

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering – all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size.) B-3/ 3.1.6

Random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30cm thick wall in cement mortar 1:6 1st footing AND 2ND FOOTING B-6/ 6.1.6

Providing and laying damp proof course with cement concrete grade M-150 (1:2:4) mortar prepared with 1% solution of water proof compound complete as per specification- 75mm thick B-3/ 3.7.2

Brick work with F.P.S. bricks of class designation 75in supwrstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:6 B-5/ 5.2.2

Centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for suspended floors, roofs, landing, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, linte, beam, plinth beam etc. suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed [lates, anchor blocks, sills chajjas lintel, beam, plinth beam etc. B-4/ 4.10.2

Providing and laying in position specified grade of cement concrete for RCC structural elements up to floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 and making good the joints and cost of plastizers ( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15 *, landings, balconies, shelves, chhajjas, lintels, bands, plain windows sills, stairrcases and spiral staircases etc. M20 graade nominal mix design B-4/ 4.3

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of vinding wire) all complete up to floor five level. B-4/ 4.13.2

Labour charge for cutting,bending for fabrication and binding reinforcement (plain or tor/ ribbed/ TMT steel) as per drawing and design for RCC and R.B. work including cost of binding wire with all lead and lift up to floor five level complete. B-4/ 4.14

Providing and fixing in CM 1:4 double paitam (rebated) stone door window and ventilator frames of approved quarry :size 125x100 mm. B-15/ 15.25.2

Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :25 mm thick. B-12/ 12.3.1

Supplying and filling in plinth with river sand under floors including watering ramming consolidating and dressing complete including cost of sand. B-1/ 1.27

Random rubble dry stone kharanja under floor B-11/ 11.26

P & F 1st quality Heavy Duty Vitrified glazed MAT tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete. : B-7/ 7.14

Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades ceramic glazed vitrified tiles with water absortion less than or equal to 0.08% confirming to IS:13753 & IS : 15622 in floors, steps etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).B-7/ 7.20.3

Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitionsetc. with PVS / neoprene gasket etc. complete as per the architectural drawings and thedirections of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basicWith glass panes of 4.0 mm thickness ( weight not less than 10.0 kg/sqm) as per IS : B-9/ 16.5.1

Providing and fixing to existing door frames 24mm thick factory made PVC door shutters made of stiles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2mm +/- 0.2 mm with inbuilt edging on both sides.The stiles and rails mitred and joined at the corners by means of M.S.galvanized/plastic brackets of size 75x220mm having wall thickness 1.0mm+/- 0.1mm and stainless steel screws. The stiles of the shutter reinforced by inserting galvanized M.S.tube of size 20x20mm and 1mm +/-0.1mm wall thickness. The lock rail made up of „H‟ section,a uPVC hollow section of size 100x24mm and 2mm +/- 0.2mm wall thickness fixed to the shutter stiles by means of plastic/ galvanized M.S.‟U‟ cleats.The shutter frame fitted with a uPVC multi-shambered single panel of size not less than 610mm, having overall thickness of 20mm and 1mm +/- 0.1mm wall thickness. The panels fitted vertically and tie bar at two places by inserting horizontally 6mm galvanized M.S.rod and fastened with nuts and washers, complete as per manufacturer‟s specification and direction of Engineer-in-charge (For W.C.and bathroom door shutter). B-8/ 16.17

P&F WVC wash basin (1st quality, I.S.:2556 mark) of approved make with C.I brackets duly painted, 1No. 15mm C.P. piller cock(I.S.:8934 mark) & 32mm C.P. brass waste coupling of approved make, 25mm G.I. waste pipe complete including cutting & making good the wall:size 510mmx400mm S-1/ 1.36.9

Size 400 mm x 400 mm or 450 mm x 390 mm Corner 1.36.6

Providing & Fixing premium qulaity WVC Urinal with PVC waste pipe, dome couplings, concealed iron brackets or screws etc. complete.1.69.2

Double Syphonic European W.C. with mounted W.V.C. flushing cistern of 10 litre capacity complete with all necessary internal fittings with Hydraulic seat cover. S-1/ 1.68.3

P&F G.I. pipes (inernal Work) with G.I. Fitting excluding union (IS:1239 mark) & MS clamps including cutting and making good the walls and floors: concealed pipe in wall including painting with anticrrosive bitumen paint: 15mm nominal boar S-2/ 2.1.9

Making connection of G.I. distribution branch with G.I. main including all fitting: up to 25mm dia S-2/ 2.3.1

P&F Piller cock (IS: 8934 mark) of superior quality and approved make : C.P. piller cock 15mm nominl dia boar S-2/ 2.6.2

P&F square mouth gully type trap 'A' grade (IS 651-1992 marked) of approved make complete with C.I. grating, frame & cover masonary chamber in C.M. 1:6, 100mm thick C.C.1:5:10 base concrete, 40mm thick C.C.M.-15 grade coping, 12mm thick cement plaster in C.M.1:3 complete as per approved design & type S-3/ 3.5.1

P&F rigid PVC pipe (IS: 4985 mark) classII/ ( 4kg/cm squar approved quality/ make including joining the pipe with solvent cement rubber ring and lubricant.: 110mm dia S-3/ 3.16.3

P&F PVC storage tank ISI marked (IS: 12701) indicatng the BIS licence no.) of approved make with cover, 25mm dia 1M long G.I. over flow pipe& 25cm long wash out pipe with plug & socket, including making connection etc. complete of approved design: 500 liters capacity S-21/ 2.26.3

Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete: New plastered surface ( three or more coats) B-12/ 12.22.1

Painting exterior surface of wall with 100% acrylic exterior paint of approved brand and manufacture to give an even an rven shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including sacaffolding and safty provision New work B-12/ 12.43

6.0 Sq. mm Armed cable E110132B

Providing & Fixing of ISI marked (IS :3854) 16 amp. flush type non modular switch as per PWD specification for electrical Works, made out from industrial grade Polycarbonate or fire resistant ABS material , minimum width of switch toggle should not less then 18 mm, brass terminal & captive screws including cutting hole in tile and making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work E070200

Wiring of twin control light / fan / call bell point as per PWD specification for electrical Works with ISI marked 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade (IS:694) and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) vergin material PVC conduit & it's all accessories( J.B. , Bends etc.) , round tiles,2 nos. 18 SWG G.I. box with earth terminal, 2 Nos 6 A two way switch,3 pin ceiling rose/ Lamp holder / 3 point Connector, 3.0 mm thick ISI marked phenolic laminated sheet (IS : 2036 - 1995), Al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by Engineer in charge, making connections, testing etc. complete as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07. . For additional technical parameters of products/ work. Short point (up to 3 mtr.) E010201

Providing & Fixing of Heavy duty capacitor start, copper woind Double ball bearing 900/1400 RPM single phase Exhaust fan as per PWD specification for electrical Works, conforming to IS:2312 ISI marke din existing opening including making connections testing etc. as required. OEM shall be an ISO certified company. Appropriate OEM test certificate shall be submitted by contractor. All as per pre approved by Engineer incharge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . E150904

Construction of Signages

S/F of Stone signage Board having Paharpur stone , for placing in required position, letters made of With approved design with all accessories made in two pieces, as per drwings, including Wooden touch painting as per approved colour etc complete in all respect as per direction of engineer in charge

Construction of Boundary wall

Earth work in hard clay loam soil with lead up to 30m and lift up to 1.5m including dag-belling, finishing of formation to required camber and grade, disposed soil to be leveled and dressed. CCF Banas VI / 1.4

laying cement concrete, well mixed in cement mortar, in foundation including ramming, curing etc. Complete in all respect, using stone grit 40 mm nominal size in ratios 1:4:8 CCF Banas IV / 1

Random Rubble stone masonry with hard stone in cement sand mortar including curing and mixing of mortar in Foundation in ratio 1:6 CCF Banas V / 1.A

Random Rubble stone masonry with hard stone in cement sand mortar including curing and mixing of mortar in superstructure in ratio 1:6 CCF Banas V / 1.B

25 mm thick cement plaster on new surface of walls / structure in two coats including smooth finishing in cement mortar 1:4 including curing etx. Complete CCF Banas IX / 1

laying cement concrete, well mixed in cement mortar, in foundation including ramming, curing etc. Complete in all respect, using stone grit 40 mm nominal size in ratios 1:2:4 10mm nominal size CCF Banas IV / 1

Breaking of rubble stone suitable for masonry work, size not less than 23 cm and weight 37.5 kg including stacking as per direction of site incharge with lead up to 50 m CCF BANAS CH II 1

Carriage earth, all construction material by manual or mechanical transport including loading unloading and stacking up to 11 km CCF BANAS CH VII I B iv

collection and transportation of medium coarse sand Lead 50 km CCF BANAS CH VII B ix

carriage of water for masonry work and concrete work including filling and emptying with lead up to 3 km CCF Banas VII / 2A

cost of cement bags