WBPWD/SSE/SWEC/NIQ07/2025-26

Amount

Distribution wiring in 1.1KV grade 2x22/0.3(1.5sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Make:- Havells/Polycab/RR Kable/Finolex/GLOSTER ) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVCclips, fittingsetc.to light/fan/call bell point with pianokey type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface Avg. run 08 mtr.

S&drawing 1.1 kv single core stranded FR-LSH PVC insulated &unsheated single core stranded cupper wire (Make:- Havells/Polycab/RR Kable/Finolex/GLOSTER) of the following sizes through prelaid poly pipe. & by the Gifish wire & making necy connection as required.

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC[ for Separate plug]

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC (For Power Plug & Computer Point)

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC From TPN DB to A/c)

2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) as ECC (From HTPN DB to SPN DB)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Make:- Havells/Polycab/RR Kable/Finolex/GLOSTER) in 20mm/25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

4 x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. [Make-Precision]

20 mm dia pipe

25 mm dia pipe

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

Supply & Fixing 240 V, 2 nos. 6A, plug socket with separate 2 nos 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 175x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover, incl. S & F 3 nos copper bar( Ph, N, E) and making necessary connections as required.

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240 x 200 x65mm MS (16SWG) switch board with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 25 A, Modular type starter (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket ((Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) , with modular type plug top with indicator and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc..

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Make:- Legrand-Myrius/Crabtree-Murano/North-West- Stylus Plus /Schneider -Zencello) & necy. Connections.

Supply &Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required.

150 mm x 100 mm x 65 mm

175 mm x 100 mm x 65 mm

200 mm x 150 mm x 65 mm

Supply & Fixing 240V 6A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite /perspex top cover by screws after making housing for switch by cutting bakelite /perspex cover and making necessary connections as required

Supply & Fixing 240V, 6A plug socket (Brand approved by EIC), without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/ perspex top cover and making necy.connections with PVC wire and earth continuity wire etc..

Supply & Fixing 240V 16/20A Pianokey type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite /perspex top cover by screws after making housing for switch by cutting bakelite /perspex cover and making necessary connections as required

Supply & Fixing 240V, 20A plug socket (Brand approved by EIC), without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/ perspex top cover and making necy.connections with PVC wire and earth continuity wire etc..

S & f 415 V ,16-32A per way, 8-way Vertical TPN DB-MCB DB for laxic MCB having IP-43-IK09 with metal door four pole MCCB as incomer and TP MCB as outgoing in suitable enclosure with metal door, comprising the following a) 160A, 35KA, FP MCCB -1 no b) 63A, C' curve, 10KA, TP MCB - 8 nos. d) Cable entry box-2 nos. (Make- Legrand/Siemens / Schneider ).

Supplying and fixing 415 V, 25-32A per way, 4 wayTPN MCBDB with SS enclosure double-door with IP-42/43 protection with 63A Four Pole Isolators as incomer and 12non SPMCBs ('C' Curve, 10 kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment, 1 no. 63A FP Isolator, 12 no. (16-32A) SPMCB. (Make- Legrand/Siemens / Schneider).

Supplying and fixing 250 V, 6-10A per way, (2+12)SPN MCBDB with SS enclosure double-door with IP-42/43 protection with DP Isolators as incomer and SPMCBs ('C' Curve, 10kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment, 1 no. 40A DP Isolator, 12 no. (6-16A) SPMCB). (Make- Legrand/Siemens / Schneider )

Supplying and fixing of 415V, 63A TPN SFU in sheet steel enclosure on angle iron frame on wall with 3 nos Din type HRC fuse as per rating. [Make- LK( L&T)/ Schneider/ Siemens.]

Supplying & fixing sheet metal (16SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. Earthing attachment and painting as required–(As per Drawing no. 470 of PWD Specification Book – May 1991, incl. S & F of 4 nos Al bar of 415V, 200A

Supply & delivery of AC 240V 50 Hz 48" sweep (1200 mm) ceiling fan complete with down rod, Canopy, fork incl S & F of P - 2 type capacitor as per IS specification & proper Manufacturer certificate of the capacitor and Safety Wire (supplied at the time of delivered the fans ) etc. without regulator, (Make- Usha 1200MM STRIKER PWD ISI 1 STAR (Safety Wire & S3 Capacitor) Br /Orient Electric- New Breeze (5yrs warranty),1200 mm sweep; 44W; 320 rpm; 225 cmm; 3 star ac ceiling fan or equivalent model of Crompton Greaves and as per direction of EIC as per direction of EIC.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)

S & F of 19mm bore GI pipe for fan down rod incl. painting drill hole etc. with 2x1.5 sq. mm. cu wire.

S & delivery 240V, 50 Hz. 230 mm( 9") Sweep 920 r.p.m. Heavy Duty AC Exhaust Fan. [ Make: EPC/ USHA HEAVY DUTY/ ORIENT ELECTRIC HEAVY DUTY]

Fixing only 230 mm exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:

Supply & Fixing Al louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) for 230 mm (9") Exhaust Fan.

Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with 'L' clamp and suitable size MS fastener, Ceiling plate, nipples etc. as required.

Fixing of single/double LED tube light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side inserted within the ceiling reinforcement and other side connected with the suitable size of bolts and nuts incl. S&F EI conduit “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. with S & F 2x24/0.20 mm flexible copper wire of 1.10 mt. length. incl. 2nos mounting kit.

Supply & delivery of Single LED Tube light fitting [Make - Signify (Philips) cat no. TMC 502 P 1 x T-LED / Crompton cat no. IGP161 LT8-16 1 X T8 /Wipro Cat No. WIO921208P or equivalent of MAGIK ] complete with 18/20 W LED tube lamp [Make - Philips Master LED tube model no. Mas LED Tube 1200mm 18W 865 T8 I – 2100lm / Crompton cat no. LTT8-20 / Wipro Cat No. LL-13-291-650 ]

Supply & delivery of Twin LED Tube light fitting [Make - Signify (Philips) cat no. TMC 502 P 2 x T-LED / Crompton cat no. IGP162 LT8-16 2 X T8] / Wipro Cat No. WIO922208P or equivalent of MAGIK ] complete with 2 x 18/20 W LED tube lamps [Make - Philips Master LED tube model no. Mas LEDTube 1200mm 18W 865 T8 I – 2100lm / Crompton cat no. LTT8-20 ] / Wipro Cat No. LL-13-291-650 ].

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling with 9W lamp. (Make: Signify(Philips)/Wipro/Crompton)

Supply and Delivery of 230 V, 50 HZ, 450 mm, 90W, 1325 RPM,110 CMM, high flo oscillating type, metal blades Wall Bracket fan operated by pull cord switch with inbuilt regulator. ( Make:- Crompton Cat No- 450mm SSTORM 2 ( METAL BLADE) /Orient Electric - Tornado Wall II/USHA Cat No. 450MM DOMINAIRE WALL FAN )

Supply,Delivery & Fixing of 90 W LED Outdoor street Light fittings with SPD protection [Brand Approved By EIC]complete with all accessories as per direction of EIC.Luminaire should be engraved or embossed with manufacturer's logo and must have 5 year warranty from OEM.OEM declaration or authorization need to be provided at the time of tender submission from power of attorney holder or authorized signatory not below of Zonal Head and warranty certificate shall be provided on OEM letterhead at the time of material supply.(Make: Signify(Philips) Cat No. BRP333 LED110 CW R5C FG PSU S1 V1/ Panasonic Cat No. pstm22908R2/ Wipro Cat No.LR02-102-XXX-57-G2) [Onsite 05 Years Warrenty by O.E.M and submit test report and warrenty Certificate before execution of the work.]

Supplying & Fixing of PVC water proof type Loop box (Make-Sintex) of size 8"X10" comprising of 4 way 100 Amp. Capacity brass stud/terminal make- AC /DC.,having hinged PVC top cover & 4 mm thick with rubber gasket lining,railway type mechanical locking arrangement,comprising of one 250V,15A kit-kat fuse unit,one NL on porcelain insulator etc. conceal in wall as per direction of EIC (Make- Syntex or as per choice EIC )

Supply & Fixing 35W LED Well Glass. (Make:- BY202P LED43S CW PSU PC SPD/Panasonic Cat No.PWGM15358 /Wipro. Cat No. LE09-501-XXX-57-XX) Onsite 05 Years Warrenty by O.E.M and submit test report and warrenty Certificate before execution of the work.

Painting of 65 mm dia 1.5Mt long mini GI pole and 1.5Mt long arm bracket including all accessories with 2 coat of aluminium paint over 2 coat of RO priming with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Painting.

Supply and Fixing of Timer DB (concealed in wall or Surfaced as per the site condition) 1) 230V, Upto 16 A capacity 24 Hrs Analog Electromechanical Time Switch (Make-Lauritz Knudsen (L&T) Cat No:- AUTS03ANA00/Siemens/Schneider) 2) 2 Pole Power Contrcator (L&T-MNX 25-2P Cat No-CS90240/Siemens/Schneider ), 3) 20A SP MCB. [Make-Siemens/Schneider/Lauritz Knudsen (L&T)] 4) 32A DP Isolator. (Make-Siemens/Schneider/Lauritz Knudsen (L&T) ) 5) Toggle Switch. (Make-Siemens/Schneider/Lauritz Knudsen (L&T) or equivalent make) 5) (2+12 Way) SPNDB (Make-Siemens/Schneider/Lauritz Knudsen (L&T) 6) Bakelite base with FP bolt type stud / Terminal block incl S & F Neutral Bar etc with this box for termination of power. 7) The complete arrangement must be wiring by 1/2.5/4/6 Sq mm PVC insulated Cu wire(Make:- Gloster/Polycab/Havells) with suitable length incl socketing /lugs etc as per requirement & direction of EIC (Make-Siemens/Schneider/Lauritz Knudsen (L&T)/Legrand)

Supply & Delivery of following size 1.1 kv.gr.XLPE insulated 1100V Grade as per IS 7098 (part 1) 1988 armoured sheathed Aluminium conductor cable with 2x10 SWG GI wire. [Make:- Finolex/Polycab /Havells/Gloster/ RR Kable]

a) 4 core 35 sqmm

b) 2 core 10 sqmm

Laying of cable above 3½ core 35 sqmm and upto 3½ core 50 sqmm on wall/ surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. As necy., mending good damages and painting

a) 4 core 35 sqmm

b) 2 core 10 sqmm

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

a) 4 core 35 sqmm

b) 2 core 10 sqmm

S & F compression type brass cable gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entryof XLPE/PVC armoured cableas & Finishing the end of the following XLPE/PVC armoured cableas by crimping method incl. S&F solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials:

a) 4 core 35 sqmm

b) 2 core 10 sqmm

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as by ISI-Medium GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Excavation of Soft soil for installation of Earth Electrode and filling & ramming.

Extra for providing masonary enclosure on the top of the earth electrod of overall size 86.36 cm x 86.36 cm x 46 cm deep ( below the ground level ) complete with cemented brick work (1 : 6 0 of 25 cm width duly plasteredwith cement motor ( inside ) CI hinged inspection cover of size 36. 56 cm x 36.56 cm with locking arrengement , GI reducer including drilling of 46 nos 12 mm dia holes on the GI pipe .

S & Laying of 50 mm dia GI cable protection pipe (ISI-M) and necessary fittings and jointing materials as required.

Supply & Delivery of 1.5 TR Hi-Wall Split Air Conditioner having the following specification:- 1) Cooling capacity Nominal :- 1.5 TR ( Ton of Refrigeration) 2) Minimum ISEER rating- 3.5, BEE leveling 3 star or more (2019-20) IS compliance - IS 1391 3) Refrigerant- R410A/R32 4) Compressor- Rotary/Scroll 5) Evaporator & Condensor Coil : Copper 6) Operating Outdoor Temparature = 50°C and above 7) Power Supply- 230 V, 50 HZ (Tolerance as per applicable standard) 8) Cordless Remote Arrangement with all modernized provision of temperature setting, Fan speed option (Low/Medium/High) Auto Swing. (Make- O-General Cat No. ASGA18BMWA-B (R32) /Mitsubishi Electric MS/MU- AGZ18VF or Equivalent model of Mitsubishi Heavy Industry)

Installation, Testing & commissioning of 1.5/1.9/2.0/2.1 Tr. Split type AC both indoor/ outdoor unit incl. S& F of 40 X 40 X 5 mm MS angle iron frame for installation of ODU and sealing of the holes in wall created during the copper pipe connection between IDU & ODU by proper sand-- cement plastering and painting (both inside and outside) to match up with the original finish mending good the damages to complete the instn as per direction of EIC.

Supply andlLaying of 5/8” or 1/2"& 1/4" dia (Soft drawn) Cu. Pipes (As per standard) with tube thickness 0.6mm incl. 9mm thick nitrile rubber insulation, , insulation tape, fastner, etc as necessary as per direction of EIC. Copper Pipe Make: Hitachi Ryoku/Mandev/Rajco & Nitrile Rubber Insulation Make: Armacel/Accoflex/K-flex

S & Laying of 3/4 Core 2.5 sqmm PVC insulated & unarmoured copper wire (Make:- Havells/Polycab/RR Kable/Finolex) through 13/19 mm dia 3 mm thick (Flexible or rigid) pipe for 1.5/2 Tr. Split AC machine with max saddling with max 1 mtr distance as per the direction of EIC.

Supply & laying Drain Water piping work out of PVC / HDPE hard pipes of 19/ 25 mm dia. incl. fitting, accessories, bends, elbows, tees, flanges, tapings, wall sleeves, hangers, supports, anchors. (Make:- Supreme/Astral/Finolex/Skipper)

Supply and installation of 16 ft x 4 ft Steel lettering acrylic signages made of 22 SWG stainless steel enclosed except the facia. The facia should be made of acrylic. provision should be as such that Inside each letter LED lights will glow throughout the letter. S/F of 30'x4 ACP sheet of 4mm thickness fixed on iron frame, on which the letters will be fixed.Installation the above mention board by expert labour on the roof by cutting concrete and fixing the board by using 100 mtr (approx 700 kg square bar and angle and fixing the total board top to the Haldia Fire Station. All letter supported by square bar and grouted properly by 2.5 " steel nut bolt on the roof concrete . Internal electrical connection and painting the total structure as per direction of E.I C

Transportation of the above board incl. unloading and Workshop to Haldia Fire Station site properly

CHAKRABORTY ELECTRIC (BID ID -6763762)

B. ENGINEERING CO. (BID ID -6772457)