PERIODICAL SERVICES TO TRANSMISSION SHOP-I AND MBT COMPLEX AT NEW FACILITY AT HVF, AVADI

Amount

Trimming of Tree branches all around the building and disposing the cutted branches without damaging existing roof, wall etc., to a lead exceeding 1 km from the site and dumping the same including clearing the cutted site from any cutted branch/ tree debris. The cost also includes use of safety aspects required at site.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard / dense soil for a width of 3 m from the shop wall to remove all the earth on the wall portion to ensure the full painting of the wall including spreading and levelling the excavated earth in the nearny sorrounding low lying areas,

Hacking out plastering 15 cm vide on either side of the crack cutting of 6mm'V' groove by inserting chicken mesh in the gaps of wall and applying pressure grouting the cracks with PU filler material of reputed companies such as Master Builder solution, Fosroc, Alchimica, Dr Fixit, or suitably equivalent make and finishing to the original shape as directed. The Crack filling shall be carried out as per the OEM specifcations specified by the OEM and the material to be used shall be of freshly manufactured having a miminum life span of six months when brought ot site.

Taking down plastering on cement or cement lime plaster any description as directed.

Demolition of Reinforced Cement Concrete structure of any description.

Supply and fixing of Wire netting of galvanised steel wire 0.91mm dia fixed with tinned tacks of wire staples size of mesh wiil be 12mm.

M & L for Dubbing in CM 1:6. 10mm thick on faces of old brick work and concrete surfaces.

Material and labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4.

Forming jambs using CM 1:4 to openings (to foregoing item), including cutting,toothing and properly bonding into old work,also facing, jointing and pointing to match existingwork, complete.

Material and labour for plastering in cm 1:4 15 mm thick on fair faces of brick work and cement concrete surfaces.

Material and labour for plastering in cm 1:3 for 12 mm thick on fair faces of cement concrete ceiling surfaces.

Material and labour for Providing, cement concrete Type B1 using 1:2:4 in roof Ditto, in lintels, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Material and labour for Reinforced cement concrete (nominal mix) Type B0 1:2:4 (12.5mm graded) in Chajjas

Material and labour for Formwork to chullah hoods, chajjas, troughs and similar items including edge including fair finished surface.

M & L for Brick work built in CM.1:6 using Sub-Class “B” Bricks.

Supply and fixing of TMT mild steel Bars 10mm dia and over, cut to length bent to shape required including cranking, bending, spiralling for hooping for columns, hooking ends and binding with MS Wire not less than 0.9mm dia or securing with clips.

Material and labour for TMT mild steel bars 6 mm to 8 mm dia cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securing with clips

Complete removal of existing any type of treatment ( White wash / OBD/Cement paint / Synthetic enamel paint/ Aluminium paint/ polish) from walls surface till the complete exposure of old plastering surfaces are exposed. The contractor shall only use mechanized equipment while complete removal inside the office room and shop walls. The dust enamating while complete removal shall be cleaned on daily basis so that no hindarence to production shall happen in shop floor and office area. The surface shall be fully scrubbed to have a uniform and levelled surfaces, The safety equipments requirements for the worker working shall be the responsiblity of the contractor.The rate is inclusive of covering of all the equipments in the godowns, shop floor, office floor to protect from the dust particles using new taurpaulin sheets wherever required,

Material and labour for applying one coat of wall primer for exterior / Interior as required at site all complete Including preparation of complete removal surfaces and new putty surfaces. The primer to be used shall be seperate for the interior walls and exterior walls. The primer to be used will depend on the recommendation by the manufacturer for the type of interior emulsion and exterior emulsion to be used as specified in the item No: 20 and 24 The paint to be used shall be of Asian paints, Berger paints, Nerolac paints or suitably equivalent. The brands shall be got approved by EIC.

M & L for applying 3mm thick wall care putty on wall surfaces the putty to be applied in layers as recommended by the manufacturer and aslo as per the SSR part - 1 specifcations all as specified and directed by EIC. The putty to be used shall be of Asian paints ( Truecare wall putty ), Berger paints (Bison wall putty). Nerolac paints (Nerolac cement putty), Birla wall care putty, JK wall putty or suitably equivalent.

M& L for applying two coats of white washing on ceilings surfaces including preparation of old ceiling surfaces complete all as specified and directed by EIC.

M&L for applying two coats of plastic emulsion on internal wall surfaces including preparaition of old wall surfaces complete all as directed. The interior Emulsion shall be of premium interior emulsion manufacurured by reputed companies such as Asian paints (premium emulsion or apcolite suprema premium Emulsion) , Berger paints ( Rangoli) Nerolac paints ( Beauty Gold) or suitably equivalent. The brands shall be got approved by EIC.

Material and Labour for painting of steel surfaces with two coats of synethic enamel paint inculding preparation of old steel painted surfaces.The first colour will be of light colour and second coat will be of darker tint. The paint to be used shall be of Asian paints, Berger paints, Nerolac paints or sutably equivalent. The brands shall be got approved by EIC.

Material and Labour for painting of steel surfaces with two coats of synethic enamel paint inculding preparation of old steel painted surfaces.The first colour will be of light colour and second coat will be of darker tint. Protective measure (As per MES Part-I spec point 15.10.3) Surfaces of doors, windows, floors, articles of furniture, machineries etc., and such other parts of the building not to be treated shall be protected by using new taurpaulin sheets from being splashed upon. Such surfaces shall be cleaned of splashes of white wash, colour wash, distemper, aluminium/synthetic enamel paint etc. The contractor shall be responsible for any damage to the fittings, fixture and furniture etc.,. The paint to be used shall be of Asian paints, Berger paints, Nerolac paints or sutably equivalent. The brands shall be got approved by EIC. The area of working will be more than 10m but not exceeding 20m.

Material and Labour for painting of wooden surfaces with two coats of synethic enamel paint inculding preparation of old wooden surfaces The paint to be used shall be of Asian paints, Berger paints, Nerolac paints or suitably equivalent. The brands shall be got approved by EIC.

M & L for french polishing one or more coat on old surfaces of any description , width or girth including cleaning and preparing the old polshed surface to receive the new coats.The paint to be used shall be of Asian paints, Berger paints, Nerolac paints or suitably equivalent. The brands shall be got approved by EIC

Material and labour for painting surfaces of any description, over 10cm in width or girth, on structural steel surfaces like purlin trusses, open gantry girders and stanchions etc., with two coat of aluminium paint including prepartation of old surfaces as specified and as directed. Protective measure (As per MES Part-I spec point 15.10.3) Surfaces of doors, windows, floors, articles of furniture, machineries etc., and such other parts of the building not to be treated shall be protected by using new taurpaulin sheets to avoid the paint drops , dust on the machines and shop floor from being splashed upon. Such surfaces shall be cleaned of splashes of white wash, colour wash, distemper, aluminium/synthetic enamel paint etc. The contractor shall be responsible for any damage to the fittings, fixture and furniture etc., The paint to be used shall be of Asian paints, Berger paints, Nerolac paints or sutably equivalent. The brands shall be got approved by EIC. The area of working will be more than 10m but not exceeding 20m.

Material and labour for applying two coats of exterior emulsion on external wall surfaces all complete Including preparation of old untreated surfaces. The Exterior emulsion to be used shall be of Asian paints (Apex Ultima supreme or Apex ultima) Berger paints ( weather coat all guardi) Nerolac paints ( Excel total ) or suitably equivalent. The brands shall be got approved by EIC The Contractor shall give the guarantee as specified by the paint companies for their above exterior emulsion product.

Material and labour for painting surfaces of any description, n exc 10cm in width or girth, on structural steel surfaces like purlin trusses, open gantry girders and stanchions etc., with two coats of Synthetic enamel paint including prepartation of old surfaces as specified and as directed The first colour will be of light colour and second coat will be of darker tint. (As per MES Part-I spec point 15.10.3) Surfaces of doors, windows, floors, articles of furniture, machineries etc., and such other parts of the building not to be treated shall be protected by using new taurpaulin sheets from being splashed upon. Such surfaces shall be cleaned of splashes of white wash, colour wash, distemper, aluminium/synthetic enamel paint etc. The contractor shall be responsible for any damage to the fittings, fixture and furniture etc., The paint to be used shall be of Asian paints, Berger paints, Nerolac paints or suitably equivalent. The brands shall be got approved by EIC. The area of working will be more than 10m but not exceeding 20m.

Material and labour for painting surfaces of any description, n exc 10cm in width or girth, on structural steel surfaces like purlin trusses, open gantry girders and stanchions etc., with two coat of aluminium paint including prepartation of old surfaces as specified and as directed (30.10+47.70 +47.70 =125.50) Protective measure (As per MES Part-I spec point 15.10.3) Surfaces of doors, windows, floors, articles of furniture, machineries etc., and such other parts of the building not to be treated shall be protected by using new taurpaulin sheets to avoid the paint drops , dust on the machines and shop floor from being splashed upon. Such surfaces shall be cleaned of splashes of white wash, colour wash, distemper, aluminium/synthetic enamel paint etc. The contractor shall be responsible for any damage to the fittings, fixture and furniture etc., The paint to be used shall be of Asian paints, Berger paints, Nerolac paints or sutably equivalent. The brands shall be got approved by EIC. The area of working will be more than 10m but not exceeding 20m.

Supply of articulating hydraulic boom lift which can reach up to the height of 15 to 25 metres height self moving type including necessary diesel for operating the articulated boom lift including a operator who will operate the articulated boom lift.The boomlift shall be used only for ensuring safety aspects at site like tying of net ,tying of life line, boom lift timings hour shall be counted from srart of the safety related work at site to completion of the safety related work for a particular day.

Material and labour for painting two coats of White Emulsion paint on old false ceiling board by removing all the board from the position without disturbing any of the Aluminium section and stacking neatly, clening the board from dust and painting two coats of white permium emulsion after giving recommended interval for cating as suggested by the Manufacturer and allowing to dry completely and refixing the boards to the false ceiling and securing as required. The paint to be used shall be of Asian paints, Berger paints, Nerolac paints or suitably equivalent. The brands shall be got approved by EIC

Repairing of existing steel windows shutter of any size and any no of shutters which are hanging from position by cutting the old ones and refabricating the hinges to suit the existing frame including repairing of window frame / sash bars if any required

Repairing of existing Aluminium windows including repairing of aluminium shutters if any, replacement of any aluminium section if necessary, cleaning the tracks and replacing the roller if required for smooth movement of shutters on the track. The rate inclusive of repairing the lock / replacement of damaged lock where ever required to ensure locking facility. The rate is inclusive of provisioning the rubber beading if necessary to secure the glass already provided.

Material and labour for painting two coats of White Synthetic enamel paint on old false ceiling board by removing all the board from the position without disturbing any of the Aluminoum section and stacking neatly, clening the board from dust and painting two coats of white permium emulsion after giving recommended interval for cating as suggested by the Manufacturer and allowing to dry completely and refixing the boards to the false ceiling and securing as required. The paint to be used shall be of Asian paints, Berger paints, Nerolac paints or sutably equivalent. The brands shall be got approved by EIC

Supply and fixing of structural mild steel such as ISA MS plates of fe 410 w E 250 grade quality A etc for theFramed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

Material snd labour for painting red oxide primer / zinc chromate primer on new / old steel surfaces including preparaiton of new steel surfaces. The paint to be used shall be of Asian paints, Berger paints, Nerolac paints or sutably equivalent. The brands shall be got approved by EIC

Material snd labour for painting red oxide primer / zinc chromate primer on new / old steel surfaces including preparaiton of new steel surfaces. The paint to be used shall be of Asian paints, Berger paints, Nerolac paints or sutably equivalent. The brands shall be got approved by EIC

Supply and fixing sheet glass ordinary quality of 4.00mm thick and glazing with oil putty in square n exc 0.5 Sq.m in each pane including removal of damaged alsss from position and refixing the aluminium clamps / beading,the rate is inclusive of replacement of damaged aluminum beading if any and making good.

Material and labour for one coat of damp block paint on wall surfaces to arrest dampness on the wall srfaces after preparing the old wall surfaces. The paint to be used shall be of Asian paints , Berger paints, Nerolac paints or suitably equivalent. The brands shall be got approved by EIC.

Removal of demolished debris / rocks to a lead exceeding 1.50 km but n exc. 5 km and depositing where directed

Supply and fixing of rough cast wired glass 6.4 mm thick and glazing by removing the aluminium beading and refixing after the fixing of new glass in square n exc 0.5 Sq.m in each pane .

M&L for Writing letters/stencil writing (Building Nos) or letters, Figures (of any type and of any not exceeding 30 cm high with fluorescent paint complete all as directed by EIC.The Contractor shall note down all the letters before painting and shall rewrite the same in the old locations.

Siva Enterprises (BID ID -844448)

BNS Construction (BID ID -843233)