Maintenance of NH-328 from km 14.000 to km 56.245 under Short Term Maintenance Contract on percentage rate basis for the financial year 2025-26 in the jurisdiction of NH division UP PWD Siddharthnagar in the state of Uttar Pradesh .

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: Superintending Engineer, N.H. Circle, P.W.D., Gorakhpur.

Name of Work: Maintenance of NH-328 from km 14.000 to km 56.245 under Short Term Maintenance Contract on percentage rate basis for the financial year 2025-26 in the jurisdiction of NH Division UP PWD Siddharthnagar in the state of Uttar Pradesh .

Item Description Item Code / Make Quantity Units Estimated Rate UNIT Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

1 Removal of rank vegetation/weeds and undesirable vegetation from shoulders, embankment slopes upto ROW (both sides) complete in all respects including breaking of clods, rough dressing and disposal of waste material and vegetation at a place outside ROW as per direction of Engineer- In-Charge and as per Maintenance Standards Clause 3.3 (Frequency will be once in a quarter). a) Shoulders including side slopes of embankment upto toe line on both sides of the carriageway. (Frequency of cleaning will be four times in a year; however limited to only areas prone to growth of rank/ undesirable vegetation and weeds). 844900 Sqm 7.2 Excess(+) Full Conversion INR

2 Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 19000 Cum 260 Excess(+) Full Conversion INR

3 Providing slurry seal for filling of hair cracks, surface cracks and preventive/ renewal treatment as per MoRTH Specification Clause 512. (b) Filling of Surface cracks 1-3 mm and preventing/renewal treatment. 8871 Sqm 102 Excess(+) Full Conversion INR

4 Cement pointing of any design/repair to existing pointing, with cement mortar 1:2 on all types of masonry work in super structure/sub structure as per MoRTH Specifications Clause No. 1000 & 1300. 94 Sqm 195 Excess(+) Full Conversion INR

5 Cement plaster/repair to cement plaster in thickness 12-20 mm in cement mortar 1:3 on all types of masonry works in superstructure/substructure at any height as per MoRTH Specifications Clause No. 1000, 1300 and 1400. 63.21 Sqm 165 Excess(+) Full Conversion INR

6 Repair to all types of damaged stone/brick masonry work in superstructure and substructure of bridges/CD works including dismantling of damaged portion and reconstructing to match with existing pattern without causing any damage to the structure in cement work complete in all respects including testing etc. as directed by the Engineer conforming to MoRTH Specifications Clause no. 1000, 1300 and 1400. The rate quoted should be after due consideration of the salvage value of the dismantled material. ( a) Repair to brick masonry in 1:4 cement sand mortar. 47.16 Cum 5190 Excess(+) Full Conversion INR

7 Finishing wall with water proof cement paint/snowcem in two or more coats to give an even shade and smooth surface for protection of exposedconcrete/masonary portion of Bridges/CD works, kerb and wheel guard including scrapping of damage paint from old surface and repairing of the existing surface wherever necessary complete as directed by the Engineer-in-Charge. (a) Water proof cement paint in two coats on existing surface 649 Sqm 52 Excess(+) Full Conversion INR

8 Providing treatment and repair of pot holes/ruts and any depth/ patch repair of all types of bitumen pavement complete as per Technical Specification Clause 3004.2 and as per direction of Engineer by using paving grade bitumen/ emulsion/ cold ready mix material. The job includes remoyal of all failed material, trimming of completed excavation to providing firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per Clause no. 503 back filling the patch with bituminous material as per clause no. 509. Compacting trimming and finishing the surface to form a smooth continuous surface all as per Clause no. 3004.2 of Technical Specification. 12 Month 1594833 Excess(+) Full Conversion INR

9 Providing and erecting direction and place identification retro-reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminum composite material sheet with overall thickness of 4mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3mm Angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing 20 Nos 6317 Excess(+) Full Conversion INR

Total in Figures 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Quoted Rate in Figures Select

Quoted Rate in Words