Dev. of water Sports Centre at Ranjit Sagar Dam (Thein Dam) near plahi at Basohli, District Kathua by way of Const. of water sports building incl sitting tiers on 1st floor, Boat shed and Manager room incl. dev. of land, Entry gate, Signboard etc.

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, disposed earth to be leveled and neatly dressed in : All kinds of Soil. including carriages

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed in all kinds of soil.including carriages

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: in all kinds of soil including carriages

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed Including carriages

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth,Crushed including carriages

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) crushed. Including carriages

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Including carriages

Providing & laying of cement concrete flooring 1:2:4finished with a floating coat of neat cement including cement slurry (50mm thick) crushed including carriages.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level. 1:1.5:3 crushed including carriages.

PReinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) including carriages

Reinforcement for RCC work including straightening, cutting,bending,placing in position and binding all complete(TMT).

Filling available excavated earth (excluding rock) in trenches,plinth,sides of foundation etc layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering.

Supplying and filling in plinth with fine sand under floors including watering,ramming,consolidating and dressing complete.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand) including carriages.

Extra for brick work in super structure above plinth level upto floor five level by manual means

Half brick masonry with bricks of class designation 75 infoundations and plinth in Cement mortar 1 :4 ( 1 cement : 4 coarse sand) including carriages.

Extra for half brick work in super structure above plinth level upto floor five level by manual means

Centring and Shuttering including strutting, propping etc and removal of form work for.

Foundations: footings, bases of columns etc

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Lintels ,beams ,plinth beams,girders, bressumers & cantilevers

Columns,Pillars,Piers,Abutments,Struts

Suspended floors,roofs landings ,balconies

Edges of slab and breaks in floors and walls upto 20mm

Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :

Extra for nosing in steps & treads of kota stone.

Providing and laying D.P.C 50mm thick with cement concrete 1:2:4 including carriages.

Providing and laying/fixing ceramic Glazed tiles 300X300mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS : 13755 of NITCO,ORIENT,SOMANY,KAJARIA or equivalent make in colour such as white ,ivory,grey,fume red ,brown laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigment complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 60x60cm

Providing and fixing gang saw cut mirror polished (premoulded and pre polished) granite, machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shape. (Area of slab over 0.5 Sqm) 18mm thick.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels ( of area upto 0.5 sqm)

Extra for providing edge moulding to 18 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work

12mm thick cement plaster of 1 cement: 4 fine sand mix. Including carriages

12mm thick cement plaster of 1 cement: 6 fine sand mix.Including carriages

15mm thick cement plaster on rough side of single or half brick wall of mix.1:4 Including carriages

6 mm Cement plaster to ceiling of mix 1 : 3 ( 1 cement : 3 fine sand)

Providing wood work in frames of doors ,windows ,clerestory windows & other frames , wrought frame & fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or with dash fasteners shall be paid for separately )sal wood

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/Sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt· shutters in mm per Sqm hinges bright finished of required size with necessary screws.(35mm) 2nd Class Deodar Wood

Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width foraperture 1.4 mm in both directon with wire of dia. 0.63mm for doors, windows and clerestory windows with hinges and necessary screws lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size Second class deodar wood.

Providing and fixing wooden moulded corner beading of size 50x50 mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete. Second class teak wood

Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber Ineoprene gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing /panelling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- Charge (glazing, panelling and dash fasteners to be paid for separately.) Powder coated aluminium ( minimum thickness of powder coated 50 microns) For fixed portions

For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)

Providing and fixing hardware fixtures (Aluminium) ISI marked anodised (Anodic coating) not less than grade AC 10 as per IS-1868

Sliding door bolts (300 x 16mm)

Sliding door bolts (250x16mm)

tower bolt 300x10mm

tower bolt 200x10mm

tower bolt150x10mm

handle 125mm

handle100mm

Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete

Twin rubber stopper

Providing and fixing door closer including all accessories

Providing & fixing of M.S grills of required pattern in frames of window etc with M.S flat , square or ,round bars etc including priming coat with approved steel primer all complete .fixed to opening /window frames with rawl plugs screws etc.

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete

Finishing walls with acrylic smooth exterior paint of required shade on New work (two or more coats applied@ 1.67 litre/1 OSqm over and including base Coat ofwater proofing cement paint applied @ 2.20kg/1 OSqm)

Applying one coat of water thinable cement primer of approved brand & manufacturer on wall surface.

Applying priming coat with ready mixed pink or grey primer of approved brand & manufacturer on wood work (hard or soft wood)

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new steel work.

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Melamine polishing on wood work(one or more coats)

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size ) over P.V.C sheet 1 m x 1 m x 400 micron , finished with 12 mm cement plaster 1:3 (1 cement:3 fine sand) and a coat of neat cement rounded the edges and making and finishing the outlet complete.

Providing and fixing stainless steel (Grade 304) railing made up of hollow tube channel plates including grinding,huffing, polisihing and making curvature wherever required and fitting the same with necessary stainless steel nuts,bolts,dash fastners etc on the top of floor or side of waist slab with suitable arrangement as per the approval of Engineer in charge(for payment purpose, only weight of stainless steel memebers shall be considered excluding fixing accessories like nuts,bolts,fastners etc. )

Providing and fixing of colour coated title design of standard make H.I rib profiled SMP coated sheets of desired colour comparising of 0.50mm thick class 3 sheets fixed to supporting structure with 8mm dia GI hooks,GI limpet and bituminous felt washers excluding cost of supporting structure.

Providing and fixing 10mm thick double layered coloured polycarbonate sheet over structural steel including cost of tubular frame customised specially designed aluminium cap and bottom ,gasket bound ties complete job.

Sanitary

Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. of make Hindware, Cera & Parryware etc

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back ,for the reception of pipes and fittings. Hindware, Cera & Parryware etc

Providing and fixing 100 mm sand cast iron grating for gully, floor or Nahani trap.

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour:Waste coupling 31 mm of 79 mm length and 62 mm breadth weighing not less than 45gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C.l. surface box 1 00x1 00x75 mm (inside) with hi11yea C:lVer fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.

Providing and fixing C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 15mm nominal bore Hindware, Cera & Parryware etc

Providing and placing on terrace (at all floor levels)polyethylene water storage tank lSI : 12701 marked indicating the BISLicense No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 15 mm nominal bore Hindware, Cera & Parryware etc

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Cutting holes up to 15x15 cm in R.C.C. floors and roofsfor passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4(1 cement: 2 coarse sand: 4 gradedstone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Providing & fixing PVC waste pipes for sink or wash basin including PVC waste fitting complete 32 mm dia semi rigid pipe

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete.

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 1 02mm, heigth of 75mm with concealed fitting arrangements, weighing not less than 106gms

Providing and fixing towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing Towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour 450mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing brass angle valve of approved quality. Hindware, Cera & Parryware etc 15 mm nominal bore

Providing and fixing C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 Hindware, Cera & Parryware etc a) 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931 Hindware, Cera & Parryware etc a) 15 mm nominal bore

Providing and fixing GI pipes complete with GI fittings & clamps including cutting & making good the walls complete(''C'' class Jindal or eqvt with UNIK fittings)

15mm nominal bore(medium)

20mm nominal bore

25mm nominal bore

Providing and fixing G.l. Union in G.l. pipe including cutting and threading the pipe and making long screws etc. complete (new work).

15 mm nominal bore

25 mm nominal bore

20 mm nominal bore

Providing & fixing in position precast RCC manhole cover and frame of required shape and approved quality Rectungular shape 600 x 450 internal dimensions.

Providing & fixing WC squatting pan (Indian type W.C pan) with 100mm sand cast iron P or S trap ,10liter low level PVC Flushing cistern(of approved make) with mannualy controlled device (handle lever) conforming to IS7231 with all fitting C.I /M.S brackets ,32mm dia flush pipe with fitting & clamps over flow arrangements with specials & mosquitoe proof coupling of municipality design complete incl. paintings of fitting & brackets,cutting & making good the walls & floors where ever required Orissa pattern white vitours W.C pan of size (580x440mm) with integral type foot rest. Hindware, Cera & Parryware etc

P/F white vitours china pedestal type W.c(European type W.C pan) with seat & lid, C.P brass hindges & rubber buffers ,10lt. low level white pvc flushing system with mannualy controlled device (handle lever) conforming to IS7231 with all fitting C.I /M.S brackets ,40mm dia flush bend, with fitting & clamps over flow arrangements with specials & mosquitoe proof coupling of approved municipality design complete incl. paintings of fitting & brackets,cutting & making good the walls & floors where ever required W.C pan with ISI Marked black sloid plastic seat & lid. Hindware, Cera & Parryware etc

Providing and fixing PVC single socketed pipes including collars etc. working pressure of 6kg per sqcm of approved make like finolex or equivalent in proper line/alignment/gradient including jointing etc complete with recommended Adhesive colour seal ring

75mm dia

110mm dia

Single equal tee without door

75mm dia

110mm dia

Bend 87.5 degree

75mm dia

110mm dia

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mmand 340x41 Ox265 mm sizes respectively with automatic flushing cistern with C. I./M.S. brackets standard size ofG. I. flush pipe and C.P. brass spreaders with brass unionsand G. I. clamps complete, including painting of fittings and brackets, cutting and making good the wafls and floors wherever required: Range of two urinal basins with 5 litre P.V.Cwhite automatic flushing cistern of approved quality. Hindware, Cera & Parryware etc

Providing & fixing of inlet mouth rain water pipe cast iron grating 15mm diameter & weighing not less than 40grams

Providing and fixing C.P. brass shower rose with 15 or 20mm inlet 150mm Hindware, Cera & Parryware etc

Providing & fixing of one H.P motor(boosting pump) of Kirloskar,sharp or equivalent make with necessary G.I fittings etc. complete

Electric Works

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required:- 25mm

Supplying and fixing of following Items:-

Fan Box

Providing & fixing MCBs of havells /Legrand or eqvt make

SP(10A to16A)

SPN(20Ato32A)

Wiring for fan point/ exhaust Fan/call bell point with 1.5 sqmm. FRLS PVC insulated copper conductor single core cable in Surface/ recessed medium class PVC Conduit , with modular switch, modular plate, suitable G.I. box and earthing the point with 1.5sqmm FRLS PVC insulated copper conductor single core cable etc as required.

P/F fan of havells make or eqvt. Make including testing ,commissioning complete .

Wiring for Circuit/Submain Wiring along with earth Wire with the following Sizes of FRLS PVC insulated copper conductor,single core Cable in surface/Recessed medium class PVC conduit as required. 2 X 2.5 SQ.MM + 1 X 2.5 SQ.MM EARTH WIRE

Supplying and fixing Stepped Type Electronic Fan Regulator on the existing Modular Plate Switch Box including Connections but Excluding Modular Plate etc. as Required

P/F Lights FTL T5 2X28W of havells or eqvt. Make including testing , commissioning complete

P/f of Concealed Ceiling Lights

P/F LEDs 8W,14W,20W of Havells including testing and commissioning complete job.

Providing & fixing of celing plate

Supply & fixing brass batten /angle holder incl. connection etc as req.

P/F of exhaust fan of havells or eqvt. Make incl. testing , commission complete.

Installation & commissioning of readymade maintenance free chemical earthing system with 50mm dia 3.0mts length corrosion free single pipe technology copper chemrode electrode complete with grouting minerals & advance earth pit cover incl. excavation earth pit & constt. Of brick earth chamber incl. plastering both inner & outer surface of brick wall as specified by the deptt.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

Providing and fixing Cladding work of aluminium composite panel thickness 5mm thick including frame work complete of all colour & pattens

Providing & fixing M.S round holding down bolts, nuts and washers complete

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.

Supplying and Digging, carring by lorry,filling good earth as per lines cross sections, grade and camber including watering and consolidation in layers with 8-10 tonne power road roller complete (Finished work including material and labour) with carriages, lead, lifts loading and unloading complete.

Providing and fixing false ceiling with 12 mm thick plain/ semiperforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board -conforming to 18:3087, finished with a coat of aluminium primer on both sides & edges, including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) T-sections 35 x15x1.5 mm size main runners, cross runners 23.5x19x1.5 mm fixed tomain runners placed 600 mm centre to centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately).

LED panels 2'-0''x2'-0'' of 36 watts of make Syska, Philips etc

Providing and fixing of Retroreflective Signages including all leads , lifts and carriages

Designing, fabricating, installing in position semi utilized system (grid) of structural glazing (with open joints) for all heights and all levels (as per drawing) including structural analysis and design loads including functional design of aluminium sections for fixing og glazing panels specified thickness (8mm thick toughned gass) complete Job

Note :- 1) Any Tropical error shall be consider as per sanction schedule of rates/ estimates.

RANJIT SINGH

MOHD IDRIS SHAN

MOHD SALEEM