KAVERIPAKKAM TOWN PANCHAYAT KNMT - 2023-2024 Drain

Amount

Earth work excavation and depositing on bank with initial lead of 10 mtr. and initial lift of 2 mtr. in hard stiff clay stiff back cotton hard red earth, shales murrom and gravel stoney earth and earth mixed with small sized boulders SS 20B etc., complete as per Standard Sepcification.

Cement Concrete 1:4:8 ( One Cement, four sand and eight aggregate) mix using 40 mm ISS HBG metal including cost and conveyance of all materials to work site and labour charges for mixing, laying, curing etc complete as per the standard specification.

Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.

Plain Cement Concrete 1:2:4 ( One Cement, two sand and four aggregate) mix using 20 mm ISS HBG metal including cost and conveyance of all materials to work site and labour charges for mixing, laying, curing etc complete as per the standard specification.

Finishing the top of flooring with granothatic flooring with cement concrete 1:2:4 (one cement, two M- Sand and four aggrigate) using 10 to 12mm stone chips – 25mm tk etc., Complete.

Supplying and fixing RCC Pre cast slab100mm thick slab in RCC 1:1 1/2:3 mix including cost of reinforcement grill but including moduling, finishing watering curing and fixing in position etc., Complete as per std., Specifications.,

Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.

Reinforced Cement Concrete 1:1½:3 Mix (One Part of cement, one and half Part of M- Sand and three Part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications. TNDSS NO: 30 V, VI (S3), VII-3.