Insertion of B 9 type tower between location No.03 05 at Budgam for replacement of the A 6 Tower by B 9 Tower at Tower location 04 of 132kV D/C Budgam to Chadoora Transmission line

Amount

Loading of ERS at Divisional Stores including manual, mechanical carriage and unloading and stacking of Site including Erection of ERS at Site including hire charges of land for erection of ERS till dismantling.

Laying of 0.2 ACSR Conductor to string

First phase string

For subsequent string

Stringing of Panther condcutor Per Km + 1.5% for sag including erection of insulator strings / fittings

Lowering of conductor from ERS

Dismantling of ERS at site including manual and mechanical transport to Divisonal Store and unloading.

DISMANTLING OF TOWER STRUCTURE

Dismantling of Tower super structure including carriage upto road site, Loading, Unloading and carriage upto Divisional stores TLMD-IV, Pampore.

DISMANTLING OF CONDUCTOR

Lowering of conductor from towers/ERS including disc insulators and fittings & rolling of conductor into bundles including Loading, Unloading and carriage upto Divisional stores TLMD-IV, Pampore.

LAYING OF FOUNDATIONS FOR B+9 TYPE JYOTI DESIGNTOWER

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level(Mild steel and medium tensile steel bars)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. M25 (1:1:2)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Dewatering of foundation pits (70% of excavation volume for 3 days.) for plain terrain.

Stub setting of tower foundations

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete.

Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Depth exceeding 1.5 m but not exceeding 3 m)

Providing & Laying of dry stone soling.(100mm)

Back Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m

Welding of Tower bolts first two storeys

ERECTION OF B+9 TYPE TOWER SUPERSTRUCTURE

Erection of super structure

Welding of tower bolts first two stories

Earthing of Towers (Pipe type) Labour part

Earth work for earthing (Pipe type)

Back filling of earth (Pipe type)

Providing of material for earthing of tower (Pipe Type)

LAYING AND STRINGING OF CONDUCTOR

Anchoring of towers including dismantling arrangements

Laying of conductor to string.

First phase string

For subsequent string

Stringing of Panther condcutor 1 Km + 1.5% for sag for 3 phase in single circuit including erection of insulator strings / fittings

Erection of jumpers at tension towers D/C

Making of compression joints for jointing of Conductor

Making of compression for repair sleeves

Fixing of phase plate, circuit plate, danger plate, Number plate

Fixing of bird guard etc for D/C

Erection of anti climbing devices

Supply, Carriage, Strorage, Delivery at site of folowing material

Galvanized Tower Superstructure for B+9 type Jyoti Design tower (As per BOM)

Galvanized Stubs for B+9 type Jyoti design Tower (As per BOM)

Danger Plates

Phase Plates

Number Plates

Circuit Plates

Bird Guard

Anti Climbing Devices

Galvanized Nuts & Bolts of sizes as per BOM

200 sq mmACSR panther,(a) Alumunium=30/3 mm(b) Steel=7/3 mm Overall dia 21mm.Approximate Wt 976Kg/Km Ultimate breaking Load=89.67 KN

Mid Span Joints

Vibration Dampers

Repair Sleeves For Conductor

Aluminium Tape

120 KN Long Rod Polymer Insulator light weight for 132 kV

Single Tension Fittings For Single Panther shall have minimum failing load of 100% ultimate strength of Bundle cnductors with compressive type Tension clamps having slipping strength 95% of ultimate Strength of conductors. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 70 KN.

AWAJ INFRA ENGINEERING SOLUTIONS (BID ID -2375295)

M/S ALJAN ENGINEERS AND CO (BID ID -2369029)

M/S NEW ALLIED (BID ID -2375031)