Renovation and Repair of Control Room Building Complex along with sub-division office building at 150 MVA 132/33 KV Grid Station Miran sahib

Amount

Renovation/Repair of Sub station Building including all Supply of material, Execution of work, Handling & Carriages

Providing and fixing gang saw cut mirror polished, pre moulded and pre polished, machine cut for kitchen platform, of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement: 4 coarse sand). Joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels Black Granite: 18 mm Pantry: 3.20x0.60 = 1.92 sqm Say 2 sqm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS 15622 (thickness to be specified by manufacturer) of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3(1 cement: 3 coarse sand) and jointing with grey cement slurry @3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Pantry: 6.00x2.10 = 12.60 sqm G Toilet: 11.20x2.10 = 23.52 sqm L Toilet: 9.70x2.10 = 20.37 sqm Total = 56.49 sqm Say 57 sqm

Providing and fixing ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of Ist quality conforming to IS 15622 of approved make, laid on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) including painting the joints with white cement and matching pigment etc. complete: in all colour Pantry: 2.00x2.00 = 4.00 sqm G Toilet: 2.85x3.05 = 8.69 sqm L Toilet: 2.00x3.05 = 6.10 sqm Total = 18.79 sqm Say 19 sqm

Providing and fixing tiled false ceiling of specified material of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanised steel sections (galvanised @120 gms/sqm both sides inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum ) sheet spaced at 1200 mm centre to centre and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum ) sheet 1200 mm long spaced between main “T” at 600 centre to centre to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size of 24x25 mm made of 0.30 mm thick (minimum ) sheet to be interlocked at middle of the 1200x600 mm panel to form grid of 600x600 mm and wall angle of 24x24x0.30 mm and laying false ceiling tiles of approved texture in the grid including, wherever required, cutting/making opening for services like diffusers, grills, lights, light fittings, fixtures, smoke detectors, etc., main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rod with galvanised butterfly level clips of size 85x30x0.8 mm spaced at 1200 mm centre to centre along main “T”. Bottom exposed width of 24 mm of all T-sections shall be pre painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-Charge . 12.5 mm thick PVC laminated Gypsum tile of 595x595 mm made of gypsum plaster board manufactured from natural gypsum as per IS: 2095 Part-1 and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. Office room: 8.16 sqm Control Room: 130.67 sqm Total = 138.83 sqm Say 139 sqm

Wall painting with Plastic Emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work Walls sqm Office Room: 11.43x3.66 = 41.83 Control Room: 0.8x52.73x3.66 = 42.18 PLCC Room: 15.24x4.27 = 65.07 Store Room: 25.83x4.27 = 110.29 Circulation Area: 40.40x4.27 = 172.51 Battery Room, Store:15.24x4.27 = 65.07 G Toilet: 11.20x2.10 = 23.10 L Toilet: 9.70x2.10 = 20.37 Pantry: 6.25x2.10 = 13.12 Ceiling PLCC Room: 13.94 Store Room: 41.50 Circulation Area: 57.40 Battery Room: 13.94 G Toilet: 8.60 L Toilet: 6.04 Entry ceiling: 44.60 Pantry: 3.63 Total = 710.52 Say 711 sqm

Finishing walls with waterproofing cement paint of required shade, Old work (one or more coats applied @ 2.20 kg/10 sqm) complete. sqm Parapets: 2x90.90x1.20 = 291.60 Outer walls: 0.85x95.10x4.90 = 396.09 Say 687.69 Say 690 sqm

Providing and fixing white vitreous china pedestal type water closet (European type W C pan) with seat and lid, 10 litres low level white PVC flushing cistern , including flush pipe with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. WC pan with ISI marked white solid plastic seat and lid.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size CP brass flush pipe, spreader with unions and clamps (all in CP brass) with waste fitting as per IS:2556, CI trap with outlet grating and other couplings in CP brass, including painting of fittings and cutting and making good the walls and floors, wherever required. Range of two half stall urinals with 10 litre PVC automatic flushing cistern.

Providing and fixing wash basin with CI brackets, 15mm C P Brass pillar tap, 32mm CP Brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. Wash basin size 630x450 mm with a single 15 mm CP Brass pillars tap

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing Stainless Steel A ISI 304(18/8) kitchen sink as per IS 13983 with CI Brackets and Stainless Steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink without drain board: 610x460 mm bowl depth 200 mm

Providing and fixing 8 mm dia CP/SS Jet with flexible tube up to 1 metre long with SS triangular plate to European type WC of quality and make, as approved by Engineer-in-Charge.

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete 32mm dia flexible pipe For Sink

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete.

Providing and fixing 600x1200x5 mm glass shelf with edges rounded off, supported on anodised aluminium angle frame with CP brass brackets and guard rail complete, fixed with 40 mm long screws, rawl plugs, etc. complete.

Providing and fixing toilet paper holder CP brass

Providing and fixing PTMT liquid soap container 109mm wide, 125 mm high and 112 mm distance from wall, of standard shape, with brackets of same material, with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing GI Pipes complete with GI fittings and clamps, including cutting and making good the walls. Concealed pipe including painting with anti corrosive bit mastic paint, cutting chases and making good the walls

15 mm dia. nominal bore

20 mm dia. nominal bore

Providing and fixing un-plasticised PVC connection pipe with brass unions 15 mm bore, 45 cm long 8 Nos

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI:12701 marked, with cover and suitable locking arrangements and making necessary holes for inlet, outlet and overflow pipes but without fittings and base support for tank. 2x1000 = 2000 lit

Providing and fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points, of approved make conforming to IS 8931 a)15mm nominal bore

Providing and fixing PTMT soap dish holder having length of 138 mm. Breadth of 102 mm, height of 75 mm with concealed fitting arrangement, weighing not less than 106 gms.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS 733 of IS: 1285, fixed including necessary filling up of gaps at junctions i.e at top, bottom and sides with required EPDM rubber/ neoprene gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, CP Brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid separately). Repair to damaged doors and windows: Sqm Main Entry Door: 3.20x2.50 = 8.00 Office room: Door: 1.00x2.10 = 2.10 Windows: 2x1.83x1.83 = 6.70 Store Door: 1.00x2.10 = 2.10 G Toilet Door: 1.00x2.10 = 2.10 Ventilator: 2.00x0.60 = 1.20 L Toilet Door: 1.00x2.10 = 2.10 Ventilator: 0.90x0.60 = 0.54 Store Partition: 3.05x3.66 = 11.16 Pantry: 2.00x4.20 = 8.40 Minor repairs LS = 5.00 Total: 49.40 Say 50.00 sqm

Providing and installation ISI marked faster cooling, having reciprocating compressor, storage type Water Cooler having cooling capacity of 150 litres per hour of approved brand and make (Usha/Voltas/Bluestar), as approved by Engineer-in-Charge. Warranty at least two years. 1 no.

Providing and installation ISI marked 25 LPH Commercial, stainless steel, auto shutoff, TDS adjuster UV+RO water purifier plant of approved brand and make as approved by Engineer-in-Charge. Warranty at least two years. 1 no.

Providing and fixing 40 Watt 60x60x1 cm size ISI marked powder coated aluminium body, LED type ceiling lights working on AC source, voltage sensitivity 90-265 volts, emanating cool white light (lumens > 4000), to match with the existing lights (including replacement of exiting lights) of approved design specification and make (Crompton/Philips/Havells/HPL) as approved by Engineer-in-Charge. Warranty at least two years 14 points

Providing and fixing bulk head exterior lighting around the periphery of the building, of approved make, with all accessories complete, as per the directions of the Engineer-in-Charge. 20 nos

Providing and fixing 12 “ dia exhaust fans with wiring, switches, etc. as per standard requirements, of approved make, with all accessories complete, as per the directions of the Engineer-in-Charge. In battery Room, Pantry, G Toilet and L Toilet, 4 Nos.

Providing and fixing cloth curtains, as approved by Engineer-in-Charge. Office Room Quantity: Job

Providing of furniture

Office Chairs

Movable Office Chairs

Two door Steel Almirah ( 6 x 3 x 1.5 ft)

Air Conditioner ,1.5 Ton Split (Make Daikin, Blue Star,O- General)

computer tables

ANIL SAINI