Change of 11 KV Line and pole Under EDD Farrukhabad

Amount

Laying and Jointing PVC Pipe. Heading

fo|qr Hk.Mkj dsUnz Qrsgx<+ ls fofHkUu lkbt ds ,l0Vh0ih0 ,oa ih0lh0lh0 iksy dks ykndj dk;Z LFky rd igqWpkuk ,oa mrkjukA

fo|qr Hk.Mkj dsUnz Qrsgx<+ ls ykbu lkexzh dks ykndj dk;ZLFky rd igq¡pkuk ,oa mrkjukA

fo|qr Hk.Mkj dsUnz Qrsgx<+ ls 100@250@400 dsoh, ds ifjorZdksa dks ykndj dk;Z LFky rd igqWpkuk ,oa mrkjukA

600x600x1800 ,e0,e0 dk x<Mk [kksndj ih0lh0lh0 ,oa ,l0Vh0ih0 iksy dks [kMk djuk ,oa lHkh ,lsljht dks iksy ij dlukA

jsLiksa Mªkabx ds vuqlkj 2500x25 ,e0,e0 dk Hkwry ls 300 ,e0,e0 uhps x<Mk [kksndj xkMuk rFkk vfFkZx jkWM ds Åijh fljs ls iksy dks th0vkbZ0 ok;j ds ek/;e ls vFkZ djuk ,oa x<Ms dks feV~Vh Mkydj cUn djukA

jsLiksa Mªkbax ds vuqlkj iksyksa dh daØhfVax ,oa xzkmfVax djus dk dk;ZA

,0lh0,l0vkj0 chty@cUp@MkWx dUMDVj dks QSykuk] [khpuk o VkbV djuk izfr rkjA

,0ch0 dsfcy ¼3x120+1x95+1x16mmsq½ ,oa ¼3x95+1x70+1x16mmsq½ Mkyus dk dk;ZA

fMLVªhC;w”ku ckDl yxkus dk dk;ZA

vfrfjDr@u;s 100 dsoh, ds ifjorZdksa dh LFkkiuk dk dk;ZA

250 dsoh, ,oa 400 dsoh, rd ds ifjorZdksa dh {kerko`f} ,oa LFkkiuk dk dk;ZA

Fabricated wire mesh fencing panels (Set of 4 Pannels) for L.T. sub station with 32x32 mm size mesh made of 12 SWG sq wire with M.S. Angle of size 50mmx50mmx5mm Frame of size 2 meter in length and 1-85 Meter height. Such panels shall be supports on M.S. Angle Iron of size 50mmx50mmx5mm having 4 No. corner supports of height 245 Cms including extended legs for grouting . The wire mesh shall be tag welded between vertical supports and horizontal runners of panels by providing M.S.Flate of size 25mmx2mm to support the wire mesh and on the middle of panels to support the wire mesh with M.S. Flates of size 50mmx5mm. Out of 4 nos sets of panels for complete L.T. Sub-Station fencing one no. pannels of same size 2mx1.85m height will be provided with a door of one meter with inside for entry of personal with welded hinges, sliding boltetc. For locking arrangement. The fencing will be painted in dark blue colour, synthetic enamel pait after painting with one coat of red oxide primer along with fixing and grouting of fencing sets. As per drawing and reparing of plinth with send Blast Bricks course sand and cement and iron road/strips to provide proper strength for Balancing of Transformer with proper plane plinth roof and other assocates work and all T&P provide by Contractor.

Construction of plinth of size 5’x5’x4’ above ground level & one it, below the ground level of 9” After excavation of 4” earth brick ballast shall be provided & remmering will be done properly After that a retaining wall of 9” with by first class brick ration 1:4 of cement & send be made. The earth shall be filled up to one ft. below the top of the plinth. After this brick ballest shall be provided up to 6’ from the earth level & proper rammering shall be done. One No. Jall of 12 mm MS for shall be fixed in the hollow of plinth & one ft. thick RCC in ratio of cement, sand & stone ballast shall be laid on the top of the plinth the 12mm thick plastering shall be done all around the plinth in 1:4 ratio of cement & sand. The contractor shall be responsible to complete the work as per direction of Supervision Engineer It. Includes the cost of all material Labour, T&P Carrier etc. required for proper completion of work

Earthing of 250KVA & above Distribution Transformer by digging pits 6” dia up to 3 mtr. Deep including inserting lowering 50mm dia G.I. and insert 25 mm G.I. pipe chemical filled pipe I.S.I. Mark B-Grade connecting with M.S. Flat 50x6mm Transformer to 50mm dia G.I. pipe and filling of chemical mixture of chamber & then connecting the top of the inserted pipe and transformer body through M.S. strip with the help of nut & bolts or through welding under under EUDD Farrukhabad

Body Earthing of Transformer.

Neutral Earthing of Transformer.

JAI BHOLE BABA ELECTRONIC

M/S SAI ENTERPRISES