Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹1.2 CrAccepted-AOC 1ST FLOOR FLAT NO A 104 ANANT EMEGINE SOCIETY PURANA BUS STAND KORBA DISTT KORBA C G 495678 | 495678 | ₹1.2 Cr Quoted ₹1.0 Cr | L-1 | Accepted-AOC Accepted as the bidder attains L-1 status |
| 2 | L-2₹1.1 Cr+₹11.6 L (11.3%)Rejected-Finance 156 INDIRA COMMERCIAL COMPLEX TRANSPORT NAGAR KORBA CHHATTISGARH 495677 | KORBA | CHHATTISGARH | 495677 | ₹1.1 Cr+₹11.6 L (11.3%) | L-2 | Rejected-Finance Rejected as the bidder attains L-2 status |
| 3 | L-3₹1.6 Cr+₹57.5 L (56.2%)Rejected-Finance MIG 110 SHARDA VIHAR NEAR VAIBHAV HOMES KORBA KORBA CHHATTISGARH 495677 | KORBA | CHHATTISGARH | 495677 | ₹1.6 Cr+₹57.5 L (56.2%) | L-3 | Rejected-Finance Rejected as the bidder attains L-3 status |
Tender Value
₹1.3 Cr
EMD Value
₹1.6 L
Closing Date
24 Mar 2025, 5:00 pmClosed
Staff Officer (EnM)
Office of the General Manager, Dipka Area, Ph. No. 9424141353
Reconditioning and Strengthening of Transfer House steel floors and conveyors walkways with replacement of MS chequered plates/deck plates, bracings i.e. Supply, fabrication, installation, commissioning etc at Silo Section of Dipka Expansion Project.
2025_SECL_331546_1
SECL/GM/DA/SO(EnM)/ e-tender/24-25/104 dtd-06/03/25
Open Tender
Electrical and Maintenance Works
Item Rate
120 days
Dipka Expansion Project, Dipka Area
Please refer to tender documents
5 documents required · 5 mandatory
₹1.6 L
26 May 2025
7 Mar 2025
26 Mar 2025
7 Mar 2025
24 Mar 2025
8 Mar 2025
7 Mar 2025 - 17 Mar 2025
Amount
Complete dismantling and removing of wornout MS chequered/deck plates, bracings, supportings assemblies along with weaken/rusted supports of floors/walkways etc at site for rectification. Removed materials/scraps are to be stacked at central location as per instruction of Engineer Incharge.
Fabrication and replacement of MS chequered plates (MS chequered plate 6 mm conforming to IS 3502 for industrial flooring), bracings, supportings for strengthening of floors/walkways of Transfer Houses & conveyors. Fabrication of MS chequered plates with sufficient stiffner (Minimum two stiffner in 1 mtr gap to be provided perpendicular to length) by cutting, welding, setting, aligning, bolting etc including allied works of strengthening of supporting beams, channels, bracing etc as per instruction of Engineer Incharge. Stairs replacement works to be carried out as per existing design. Additional bracing of ISA to be provided for safety purpose as per requirement with existing supporting design. Complete Iron & steel having with priming coat of approved steel primer. (All materials will be provided by contractor)
Fabrication and replacement of MS deck plates (MS deck plate 3.15 mm conforming to IS 1079/2062 for decking), bracings, supportings for covering of return side of belting in conveyors. Fabrication of MS deck plates with sufficient stiffner/bracing (Minimum two bracing in 1 mtr gap perpendicular to length by ISA 65X65X6 mm or above) by cutting, welding, setting, aligning, bolting etc including allied works of strengthening of supporting channels, bracing etc as per instruction of Engineer Incharge. Complete Iron & steel having with priming coat of approved steel primer. (All materials will be provided by contractor)
Scope of Work: Please refer to page no. (32-33) of NIT or Annexure-A in the uploaded tender documents for scope of work. Note: The estimated cost is excluding CMPF @ 12% and CMPS @ 7%. These statutory payment as applicable shall be reimbursed to the contractor on production of proof of payment limited to the maximum likely number of workmen to be deployed per day is 30 nos.
Total impact of GST for the purpose of CTC
BLACK DIAMOND EQUIPMENTS PVT. LTD. (BID ID -1143303)
HEMS CORPORATION SERVICES INDIA LIMITED (BID ID -1144585)
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .