Supply of Electrical and Electronic equipments items for FRP boat Yard 2158

Amount

LED Red reading lights 24vdc with white ABS made cover. The lights should be water resistant IP 67, impact resistant, UV resistant suitable for internal/external use made up of ABS & Polycarbonate. The lights should be prewired including 120mm connection lead. Dia around 5-6”. 30722 Lalizas make.

24vdc watertight lights fitting with bulbs. The light fittings should be made of chromed brass and comprise of bayonet lamp holder + screw lamp holder. The lights should be suitable for machinery rooms & deck lighting. The light must be water proof with suitable IP protection. Ideally a rectangular / oval shaped light with metallic grid for protection of light during maintenance is required. 13.202.89 Osculati

24vdc Dome LED (54) lights & fitting. The cover should be white. Dimensions (143 X 38 mm). The light should be made up of UV stabilized ABS. 70676 lalizas make

Blue flashing light. Power-24vdc The light should have mountings suitable for fitment on FRP boats. Should have suitable IP protection. rotating at 360 degrees.

Heavy duty battery isolator (polycarbonate body with copper contacts) with removable key with nickel plated pin, sealing capwith back fairing. The flange dia 72mm 300 Amp. Capacity per 5 seconds 2.500 A, continuous capacity 290 A, 14.382.01 Osculati

Isolator / Diode Charge separator (two input & three output) Dimension 320 X 68 X 135 mm, Weight 1990 gm. 60-80 amp,

6 Way Black light anodized panel (Size 170 X 70) with protection level of IP 56, fitted with 6 watertight switches, first three switches has three positions(ON-OFF-ON), the last three has monetary ON position for horns, fitted with rubber cap & glass fuse holders Size 6 X 32mm. 15 Amp

24VDC Wiper motor with fixing shaft length of 60mm, stop angle of 60 degree complete with SS telescopic pantograph wiper of length 650 mm with wash nozzle, solenoid valves, T connectors, hose, water tank etc. The system should be complete with its remote control panel and associated cable. 70W, Working torque 9 Nm (Max 35 Nm), Speed 2(30/45 rpm).

ETA thermal over current circuit breakers switch with splash cover with knurled nut & O ring. Single pole high performance thermal circuit breaker, with push-to-reset tease free, trip-free snap action mechanism (R-type TO CBE to EN 60934). Designed for thread neck panel mounting and for applications with a high fault current switching requirement. 100 amp

ETA thermal over current circuit breakers switch with splash cover with knurled nut & O ring Single pole high performance thermal circuit breaker, with push-to-reset tease free, trip-free snap action mechanism (R-type TO CBE to EN 60934). Designed for thread neck panel mounting and for applications with a high fault current switching requirement. 60 amp

ETA thermal over current circuit breakers switch with splash cover with knurled nut & O ring Single pole high performance thermal circuit breaker, with push-to-reset tease free, trip-free snap action mechanism (R-type TO CBE to EN 60934). Designed for thread neck panel mounting and for applications with a high fault current switching requirement. 25 amp

Single pole Magnetic DC Series Circuit breaker . 60amp.

Voltmeter 24vdc with shunt. Circular black dial with mounting ring nut. (18 to 32 vdc)

Ampere meter with shunt. Circular black dial with mounting ring nut. -60A to +60A

Two terminals (ON-OFF) Panel mounting toggle switch (Carling switch tumbler switch). High tension thermosetting body with silver plated contacts, nickel plated brass lever & sleeve, rubber cap with brass washer. 10 amp.

Metric Thread Conduit watertight Gland with Nut for round cable. Should be made up of Flame, salt water, acid alkali alcohol oils resistant Nylon 6/6, Self extinguishing Buna-N form seal. Thread size ¾” NPT, Cable range 51” to71”. TNCM16.

Metric Thread Conduit Gland with Nut. TNCM 28.

Self extinguishing Nylon Cable clamps ½” with elastic wings & snap lock. The clamp should have central screw mounting arrangement.

Self extinguishing Nylon Cable clamps 1” with elastic wings & snap lock. The clamp should have central screw mounting arrangement.

Self extinguishing Nylon Cable clamps 1.5” with elastic wings & snap lock. The clamp should have central screw mounting arrangement

24vdc Fire detection system with smoke detector and heat detector complete with display panel, sensors and audible alarm. (Total four smoke detector & 4 Heat detector sensors) with suitable cables of minimum 15m length. Onsite installation assistance to be provided.

Remi make 24vdc 7 inch fan adjustable in all positions (vertical, horizontal & circular), fitted with rotating blade protector. The capacity of fan should be 1000 cum/hr. The fan should have suitable mounting for fitment on FRP boat with heavy vibrations.

Standard pin terminal type Relay with base 6V AC double contact with standard DIN rail mount. Ref IDEC IZUMI RR2PU

250 amp Common busbars, high insulating capacity plastic base, nickel copper plated support bar with cover along with SS screws & nuts. 250A, Terminal power 4 X 8 mm , Base dimension 201 X 38 mm

DC series single pole IEG magnetic circuit breaker 25 amp

DC series single pole IEG magnetic circuit breaker 50 amp

Battery charger input-230vac 50 hz, output-24vdc 50amps. Should be suitable for charging three battery banks.

Shore power connector Panel Mounting M/F 63 amps water proof IP 67. Mirror polished AISI 316 SS & Polycarbonate body, nickel plated brass contacts & back cable protection. In addition to this the shore power plug /top suitable for the socket to be supplied. The system should be suitable for fitment of 3X10 sq mm shore supply cable. The system should comprised of receiving female socket fitted on boat, male plug for fitment to this socket.

Inverter 1000VA input-230vac/24vdc & output-230vac, 50hz

Diode 120 amp positive

24V Solid state buzzer (dia 22mm)

Indicating light red 230vac, 50hz

Indicating light orange 230vac, 50hz

Earth leakage indication light 230vac, 50hz

230vac RCCB 63 amp

2 way changeover switch 63 amp

Digital volt meter 230vac, 50hz(4 module as per panel mounting)

Digital ammeter 230vac, 50hz (4 module as per panel mounting)

CT 230vac 100amp (2 module as per ammeter requirement)

MCB 16 amp 2pole

MCB 10amp 2 pole

MCB 6amp 2 pole

MCB MT cover plates

Surface mounting 3 modular plates

Surface mounting single module 16amps switch

Surface mounting single module 10amps switch

Surface mounting single module 6amps switch

230vac LED indicator light dia 19mm (yellow)

400 Volts, Flush enclosures, 3 Row 12 Module TPN, DB door panel with clear acrylic door

LED Deck flood light with white housing. Voltage 9- 30 V DC. Thermally conductive polymer housing. The light should have heavy duty grimland lens.The light should be heavy duty type suitable for marine climatic condition with IP 67 protection completely sealed. The bracket should be Polished SS 316 L material. Specification: Operating voltage: 9 – 30 v DC Cable: Prewired with 0.5m triple core marine cable. Approval : CE type approval Light output : 750 lumens Power consumption: 12 W Weight : less than 500 grams

White LED flood lights – spread. Specification: Operating voltage: 9 – 30 v DC Cable: Prewired with 0.5m triple core marine cable. Approval : CE type approval Light output : 750 lumens Power consumption: 12 W Weight : less than 500 grams. 24V DC system Power consumption : At high intensity -12W At low intensity – 2 W

Heavy duty Search Light.Specification: Light : Higher than 200000 Candela (CP) Power Consumption : 50 W Control: Remote control from Wheelhouse with its panel & switches. Complete with 25ft (7.5m) cable, with optional extension cables & waterproof joystick control. The size of light should not exceed 27 X 28 X 23 cm Rotation: 360 Degree horizontal & 60 Deg vertical sweep Material: Should be of robust design, corrosion resistant & weatherproof & shock proof. Note: The bulb of the light should be replaceable type. Ideally Xenon /LED /halogen light preferred. 24V DC 50 W

24vdc Exhaust blower with drain grid and hose flange. Inlet dia 75mm. The blower should be robust design for continuous use and watertight with separate fan. The blower should be suitable for fitment in engine room at a temperature of 45 degree. 260 cum/hr, 1.8A

Cable tie (100 nos each pack) 100 mm

Cable tie (100 nos each pack) 150 mm

Cable tie (100 nos each pack) 200mm

Cable tie (100 nos each pack) 250 mm

Cable tie (100 nos each pack) 300 mm

Cable tie (100 nos each pack)350 mm

Copper plate 5 X 200 X 300 mm

Copper flat bar 40 X 3mm

Anode: weight- 3.5 To 4 Kg Dimension- Inner center to center 200 mm & External 300 mm. The anode to be supplied with 2 Nos SS 316, 12 mm threaded stud of 150 mm length & with 08 nuts & 06 Washers)

Emergency Fuel cut off Valve 24V DC The valve should be in accordance with directive EC 94/25) EN 28846 with Class type approval. The valve should enable the remote intercepting of fuel distribution with electric control, also fitted with manual control and should be supplied with hose nipples suitable for ½” fuel line. The remote control panel also to be supplied with the system.

USB Mobile charger Socket

Mechanical emergency fuel cut off valve (Brass) fitted with 180 Degree spring swivelling lever with suitable cable (Refer Osculati Part No 17.400.01 with cable 17.450.90). ½”

Deck ventilator 24V DC exhaust fan for engine room. (Refer Vetus 2015 capatalogue Page 268, Part FAN 24. The set should be rain & splash proof. The external exhaust hood should be of SS 316 Mirror polished. T

Remote operated Battery switch with manual over ride option and LED status indication for remote control switch. The switches should have continuous 500, intermittent 700 & cranking 2500 A rating (A DC). The switch stud & buts should be copper (tin plated). 500 Amp, Size 4” X 4” X 4.33”. Stud Size (2 X ½”)

PVC trunking rectangular (100 x 50 mm) cable tray. Length of the each tray 2 m

Teflon Tape ¾”

Blue colour Electrical Insulation tape

Black colour Electrical Insulation tape

Red colour Electrical Insulation tape

Green colour Electrical Insulation tape

Cable clamps ½, inch

Cable clamps 1 inch

Cable clamps 1.5 inch

Kosoo K-2 Heat Shrinkable Tubes16,mm (red )

Kosoo K-2 Heat Shrinkable Tubes16,mm (black)

Kosoo K-2 Heat Shrinkable Tubes 20mm (red )

Kosoo K-2 Heat Shrinkable Tubes 20mm (black)

150 amp Common busbars, Part no:2312

Lugs 95sq.mm round dia 12mm

Lugs 50sq.mm round dia 12mm

Lugs 50sq.mm round dia 10mm

Lugs 35sq.mm round dia 12mm

Lugs 16sq.mm round dia 10mm

Lugs 16sq.mm round dia 6mm

Lugs 6sq.mm round dia 10mm full insulated

Lugs 6sq.mm round dia 6mm full insulated

Lugs 4sq.mm round dia 10mm full insulated

Lugs 4sq.mm round dia 6mm full insulated

Lugs2.5sq.mm round dia 10mm full insulated

Lugs 2.5sq.mm round dia 6mm full insulated

Lugs 1.5sq.mm round dia 6mm full insulated

Lugs 1.5sq.mm round dia 4mm full insulated

Fork lugs 1.5mm full insulated

Fork lugs 2.5mm full insulated

Fork lugs 4-6mm full insulated

Male lugs 1.5mm full insulated

Female lugs 1.5mm full insulated

Male lugs 2.5mm full insulated

Female lugs 2.5mm full insulated

Male lugs 4-6mm full insulated

Female lugs 4-6mm full insulated

Pin lugs 1.5mm full insulated

Pin lugs 2.5mm full insulated

Pin lugs 4-6mm full insulated

Pin lugs 10mm full insulated

3M Cable masking tape 1 inch width

3M Cable masking tape 1 1/2" inch width

Marinetech Managers and Surveyors

US Dollar

European Euro

British Pound

Australian Dollar

Egypt Pound

Japanese yen

Swedish Krona

Singapore Dollar

Norwegian Krone

Portion of Quoted Rate in Currency

US Dollar

US Dollar

US Dollar

US Dollar

US Dollar

US Dollar

US Dollar

US Dollar

US Dollar

US Dollar

US Dollar

US Dollar

US Dollar

US Dollar

US Dollar

US Dollar

US Dollar

US Dollar

US Dollar

US Dollar

US Dollar

US Dollar