PROVISION OF STEEL GRILL ARBORICULTURE INFRONT OF MAIN ADMINISTRATIVE BUILDING AT HEMRL PASHAN PUNE

Amount

Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as requirement to facilitate demolition) complete all as specified and directed.

Demolition of brick work or stone/block masonry built in cement morter or cement lime mortar including all quoins,pillars,arches etc, and clearing off the premises. complete all as specified and directed.

Excavating in trenches, n exc 1.5 metre wide and n exc 1.5metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 metre wide and n exc 1.5metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed

Removing excavated material n.exc 50metre and Depositing where directed at a level n. exc 1.50meter above starting point.complete all as specified and directed

Returning filling in including spreading ,levelling , watering and well ramming in layers not exc 25cm complete all as specified and directed.

Material and labour for PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) for foundation filling and bed concrete complete all as specified and directed.

Material and labour for Precast cement concrete block masonry exceeding 10 cm in width with solid block of PCC(1:3:6) type C1 (using 20 mm graded crushed stone aggregate) and setting in cement mortar 1:6 complete all as specified and directed..

Material and labour for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forgdt into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Taking down cement plaster on brick / concrete / stone surface including raking out joints, hacking for key scrubbing down with water etc.complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces,finished even and smooth without using extra cement complete all as specified and directed..

Dismantling barbed wire fencing above walls etc complete including removal outside MD land.complete all as specified and directed.

Dismantling of wrought iron and steel work of any description and in any position as in fencing grills complete all as specified and directed.

Material and labour for Joist, channel, angle, or tee sections, fixed independently, without connection plate,as in fencing post etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 W Grade E 250 Quality B complete all as specified and directed.

Supply and fixing chain link fencing of any size or type complete all as specified and directed.

Material and labour for complete removal of existing treatment by scrapping down with wire brushes; washing and drying up filling with exterior grade wall care putty where undulated on wall and applying two coat of exterior acrylic emulsion over a coat of acrylic primer after preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.

Material and labour for applying two coat of exterior acrylic emulsion over exterior grade wall putty and a coat of acrylic primer after preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer.complete all as specified and directed.

Material and labour for PCC 1:2:4 Type C1 (using 20mm graded crushed stone aggregate) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water t hroughs and the like including weathering, slightly rounded for chamfered angles and throating,in complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for 75mm thick Cement concrete in foundation filling and mass concrete 1:5:10 Type E2 using 40mm graded crushed stone aggregate complete all as specified and directed.

Material and labour for 60mm thick coloured machine pressed precast concrete interlocking paver block any shape and size as directed confirming to IS 15658-2006 , M-35 Grade laid over and including 50mm thick sand cushioning complete all as specified and directed.

Material and labour for 75mm Cement concrete 1:2:4 type B-2, ( using 40mm graded crushed stone aggregate) complete all as specified and directed.

Material and labour for chequred cement concrete tiles 20cm x 20cm x 25mm thick, set jointed and pointed in neat cement slurry in floor over and including 15mm screed bed in cement mortar 1:4 and with gray cement and no pigment complete all as specified and directed.

Material and labour for reinforced concrete pipes, class NP2, laid and jointed complete with collars of dia 300 mm complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor 16 Sqmm 4.0 core complete all as specified and directed.

Supply and fix LED path light 25 watts complete all as specified and directed

Supply and fixTubes, `light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors 50 mm dia bore (for cable protection between pot of lanterns) complete all as specified and directed

Material and labour for PCC (1:3:6) type C1 using 40 mm graded crushed stone aggregate in foundations, filling and mass-concrete complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground, earth pit not less than 2.25 metre deep below ground level with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanised wire 4 mm by means of nuts, bolts, check nuts, washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I and connected to earthing test point including excavation/earth work in any type of strata, RCC chamber with and including PCC cover slab 50mm thick having 8mm dia TMT for reinforcement @ 150mm C/C both ways and watering pipe with funnel with GI protection pipe light grade 20 mm bore, charcoal & salt complete all as specified and directed.

Material and labour for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint including preparation complete all as specified and directed

Supply install test and commissioning outdoor type LT cubical street light timer panel (CPRI approved) confirming to relavent IS factory fabricated made out of 3m thick out door type CRCA sheet duly poder coated & sutied size to accommodate all accessories/ fittings with 10 Sqm conecting copper powr wire, suitable angle iron frame with following accessoreis comparmentilize in construction to accomodate incoming/outing Cables and conecting copper wire including foundation for fixing angles iron frame for timer panel comprising of the following :- a) Digital 24 Hrs timer b) Power contractor 40 Amps A3-01 c) MCB TPPN 40 Amps 10KA three pole 415 Volts d) Backelite fuse cut out single phase, 32 Amps-03 e) Indication lamp RYB -01 set. f) auto and manual switch.

Material and labour for submain wiring using 2 X 4.0 sqmm multi stranded of FRLS PVC insulated copper conductor, single core cable in including one FRLS PVC insulated copper conductor 4 sqmm single core as a earth conductor including PVC conduit of required size in surface/recessed as required complete all as specified and directed. Note :- 2 run of 4 sqmm & 1 run of 4 sqmm cable shall be measure in one run.

Supply and fix in repairs pole junction box sheet moulded compound (SMC) type with hinged door and locking arrangement of size 140 mmx140 mmx100mm internal comprising one , one No SP MCB single pole of capacity 6 Amps 240 volts and one No terminal for loop in and loop out suitable for single phase street light system including nuts and bolts and connecting up complete, MS clamp fabricated from 25 mmx3mm MS flat iron complete all as specified and directed

Supply and fix Sheet metal enclosure DB TPN 4 way 415V double door out door type complete all as specified and directed

Supply and fix MCB TPN 25 Amps 10 KA rating complete all as specified and directed

Supply and fix MCB SP 10 Amps 10 KA rating complete all as specified and directed

Supply and spreading sand for cushioning of UG cable laid trenches complete all as specified and directed. Note :- For the purpose of payment punned 18 cm thickness only will be measured.

Supply and laying sub class B bricks, old size, laid flat adjacent to each other perpendicular to the direction of cable with width equal to length of brik in trenches for protection of cable complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor and pavings n.exc 15cm thickness (below or above GL) complete all as specified and directed.

Material and labour for 30mm thick PCC type B-0 1:2:4 using 12.5mm graded aggregate finished fair and even without using extra cement complete all as specified and directed.

Material and labour for 3 mm thick vinyle coated antistatic flooring having electrical resistance of floor surface to earth between 50 kilo Ohms to 2 Mega Ohms measured with wet electrode in accordance with details contained in STEC pamplet No-7 all as specified over copper strips grid work, made out of using 25mm x 0.5mm thick copper strips forming one square meter grid, jointly of surface by pasting suitable adhesive. The copper grid provided with diagonal earthing two Nos for each room to connect earthing. The earthing resistance shall not exceed fixed to the existing floor at the interval of 1.00 m to 1.5 m complete as per manufacturer's instructions all as specified and directed. Make :- Krishna Vinyl Tiles / Armstrong / M/s Marblex Tiles / Polyfin Tiles / Square foot.

Supply and fixed precast cement concrete kerb blocks of Grade M30 of any size and shape as required at site with grey cement and pigment of any colour set, jointed and pointed in cement mortar 1:4 with grey cement and pigment to match complete all as specified and directed. Note : Laying of kerb stone all as directed by Engr-in-Charge.

Sudularush Construction

R. K. Industrial Fabricators

Rays Breakers

M/S NILESH BUILDERS

VIRENDRA FABRICATORS

M/S.J.V.Datar

sanjay m. suryawanshi

M/s S.R lahoti

Baljeet Singh Choudhari