REPAIRS TO COMPOUND WALL CHAIN LINK FENCING SECURITY GATE AND CERTAIN MAINTENANCE WORKS UNDER AGE B R I UNDER GE AF MARATHAHALLI BANGALORE

Amount

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each complete all as specified and directed

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (Without taking off shutters from the frames) complete all as specified and directed

Taking Down shutters of any description exc 1 Sqm but n.exc 2 Sqm each etc. complete all as specified.

Dismantling of steel collapsible gate of any description complete all as specified.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used and edges will be painted to match with printed sheet including reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strips of 20mm width stuck inside with solven cement for styles and plain colour PVC sheets for top rain lock rail and bottom rail on either side and as gap insert for top rail and bottom rails, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet bedding and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete

S&F mild steel butt hinges of 75 mm size medium weight cold rolled by welding to existing frame complete all as specified and directed

S&F 125mm long Aluminium anodised barrel tower bolts of extruded section fixed to PVC door with screws complete all as specified.

S&F 125 mm long Aluminium anodised handles extruded section fixed to PVC door with screws complete all as specified.

S&F for pressed steel frames of size 125 X 60 mm as in door frames with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in cement mortar 1:6 complete all as specified and as directed.

S&F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in cement mortar 1:6. complete all as specified and as directed.

M&L PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate for filling in bed block of hold fast etc complete all as specified and as directed.

S&F 2nd class Hard Wood 40mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I)kiln seasoned and chemically pressure treated complete all as specified and directed

S&F 2nd class Hard Wood factory made 35 mm thick glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats complete all as specified and directed

S&F galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm dia and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

S&F 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete.

S&F in repair Aluminium alloy anodised Sliding bolt 300mm long with hasp, staple(bolt type and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as directed by Engr-in-Charge.

S&F Aluminium anodised bolts barrel tower bolts 200mm long of extruded section, complete all as directed by Engr-in-Charge.

S&F Aluminium handles 150mm size cast type anodised , complete all as directed by Engr-in-Charge.

S & F in repairs Floor door stopper 150mm length of cover plate aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in doors , complete all as specified and directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F Powder Coated aluminium door shutters (minimum thickness of powder coating 50 micron) aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. Note: Glass will be measured and paid seperately.

S&F for 5.5 mm thick tinted glass exc 0.5 sqm of each pane of superior quality fixed to alluminium frame works with rubber beadings Complete all as specified and as directed by Engr-in-Charge.

S&F for Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers Complete all as specified and as directed by Engr-in-Charge.

S&F for 12mm thick prelaminated particle board, fixed to aluminium framework, complete all as directed by Engr-in-Charge.

S&F in repair Aluminium (Extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as directed by Engr-in-Charge.

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc. complete.

S&F in repair Floor door stopper 150mm length of cover plate aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in doors , complete all as specified and directed.

S&F Steel rolling shutters of laths in 1 mm thick with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type

S&F Steel rolling shutters of laths in 1.25 mm thick with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete gear operated type with bevel gear box and crank handle.Complete all as specified and as directed by Engr-in-Charge.

S&F Safety lever locks mild steel with 4 levers for rolling shutters Complete all as specified and as directed by Engr-in-Charge.

S&F Ball bearing for rolling shutters Complete all as specified and as directed by Engr-in-Charge.

Taking Down shutters of any description exc 1.00 Sqm but n.exc 2.00 Sqm each and refixing in other opening without damaging the door including cutting the door bottom for adjusting of height if required, etc complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exc 1.00 sqm and n.exc 2.00 sqm each and refixing the same opening without damaging the door including cutting the door bottom for adjusting of height if required, etc complete all as specified and directed by Engineer-in-Charge.

Taking down shutter of aluminium door shutters exc 1.00 sqm and n exc 2.00 sqm each and refixing the same opening without damaging the door by adjusting the bottom of door adjusting of height if required, including material and labour for joining cleats glazing clips, rubber neoprene packing , handle, hinges, anodised aluminium snap, mortice lock, beading screws, bearings etc. complete all as specified and as directed by Engr-in-Charge.etc

S&F in repair of Laths/Locking plate of 1mm in rolling shutters including removal of existing broken laths in rolling shutters with opening of bottom locking plate and number of existing laths as and where to repair the borken laths etc. complete all as specified and as directed by Engr-in-Charge.etc.

Easing of exising rolling shutter and its machanisium up to its area up to 10 sqm i.e ball baring with or without removing the rolling shutter and re fix in the existing location after making operational in all purpose. Change of cost of sprting/anti choring rod/chain wheel/hand chain/Haspend staple or any other fitting required to make the operational rolling shutter is included in the coated rate. No extra shall be admissiable on that account. etc. complete all as specified and as directed by Engr-in-Charge.etc. Note : Change of laths and bottom locking plates will paid separately.

Easing of exising rolling shutter and its machanisium up to its area from 10 to 20 sqm i.e gare box, ball baring with or without removing the rolling shutter and re fix in the existing location after making operational in all purpose. Change of cost of sprting/anti choring rod/chain wheel/hand chain/Haspend staple or any other fitting required to make the operational rolling shutter is included in the coated rate. No extra shall be admissiable on that account. etc. complete all as specified and as directed by Engr-in-Charge.etc. Note : Change of laths and bottom locking plates will paid separately.

S&F in repair for galvanised MS wire cloth 0.56 mm nomiral dia and wire and average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples.

S & F in repairs Aluminium anodised bolts barrel tower bolts 200mm long of extruded section, complete all as directed by Engr-in-Charge.

S & F in repairs aluminium handles 150mm size cast type anodised , complete all as directed by Engr-in-Charge.

S&F in repairs Aluminium Mortice lock of 4 levers in vertical type of size 100 mm complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Ball bearing for rolling shutters complete all as specified and as directed by Engr-in-Charge.

Hacking out old broken glass from metal frame of any thickness incl punching or drilling out old glazing pins/springs clips and providing and fixing new ones complete all as specified and as directed

S&F sheet glass ordinary quality 4mm thick in squares n.exc 0.50sqm in each pane for metal /wooden frames, complete all as directed by Engr-in-Charge.

S&F sheet glass ordinary quality 4mm thick in squares exc 0.50sqm in each pane for metal /wooden frames, complete all as directed by Engr-in-Charge.

S&F figured glass, pinhead type 4mm thick in squares n.exc 0.50sqm in each pane for metal /wooden frames , complete all as directed by Engr-in-Charge.

S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

M&L for Preparation of new surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying two coat of synthetic enamel paint over a coat of Pink primer etc complete all as specified.

M&L for Preparation of new/ previously unpainted surface of steel surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying two coat of synthetic enamel paint over a coat of red oxide/zinc chromate primer etc complete all as specified.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar , incl all quions, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for foundation complete all as specified and directed.

Returing, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm, hard/dense soil complete all as specified and directed

Removing building materials etc. to a distance of 5 Km out side MoD land /Unit land including loading, unloading and stacking at the destination etc. complete all as direction of Engineer-in-charge,

M & L for Walling of squared rubble,regular coursed, well bonded,bedded and solidly hearted masonary built in cement mortar 1:6 including hammer dressing all as specified and directed.

All as per above Item No 57 above, but, except material , complete all as specified and directed.

Extra over stone masonry for hammer dressing to face stones and dressing offace beds and joints as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface not exceeding 20 mm complete for lime or sand stones, complete all as specified.

M&L Keyed pointing to random or polygonal rubble stone masonry, uncoursed or brought upto courses in cement mortar 1:4 complete all as specified.

M&L for flush pointing to squared rubble masonry, uncoursed or brought upto courses in CM 1:4, complete all as specified and directed by Engineer - in - charge.

Material and labour for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width Type C1 1:3:6 (20 mm graded aggregate ) and setting in mortar cement mortar 1:6 except Blocks complete all as specified and directed

Material and labour for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width Type C1 1:3:6 (20 mm graded aggregate ) and setting in mortar CM 1:6, complete all as specified and directed

M&L for concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in foundation, filling and mass concrete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) of 75mm thick as in plinth protection.

Material and Labour for PCC (1:2:4) type B1 using 20 mm graded crushed stone aggregate as in coping, mud stops, benching, water tank platform etc.on roof, chajja weathering, slightly rounded or chamfered angles and throating etc. including necessary form work complete as directed.

Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc

M&L for rendering 15mm thick cement mortar in 1:4 on fair faces of brick work or concrete surfaces even and smoothe without using extra cement.

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint over and including a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified

Dismantiling wrought iron or mild steel work of any description not otherwise provided for etc comoplete all as specified.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) coforming to Fe 410 -W (Gde E-250) Quality -A all as specified and directed.

S&F for angle iron posts and struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed

Supply only chain link MS galvanised fencing any size or type , complete all as specified and directed by Engineer - in - charge.

Fixing only chain link fencing including line wires,, any mesh, size and type to any type of standards, rails, straining bolts, welding work required etc. including provision of winding wire, complete all as specified and directed by Engineer - in - charge.

Dismantling barbed wire fencing of any description

S & F for Galvanised 2 strand, steel barded wire 2.24mm dia barbed with 2mm dia barbs at 75mmmm spacing and straining and fixing to any type of strandard rails straning bolts, incl, securing or tying at crossings with and provision of galvanised mild steel, wire staples or steel pins etc complete all as specified and directed. (each line wire to be measured separately).

Fixing only Galvanised 2 strand, steel barded wire 2.24mm dia barbed with 2mm dia barbs at 75mmmm spacing and straining and fixing to any type of strandard rails straning bolts, incl, securing or tying at crossings with and provision of galvanised mild steel, wire staples or steel pins etc complete all as specified and directed. (each line wire to be measured separately).

S&F for zinc coated Concertina coil (dia appox 610 mm) with core wire of thickness 2.60 mm having tensile strength not less than 1650 N/Sqmm and zinc coating 230 GSM and 0.5 mm thick cold rolled carbon strip having 50 numbers of spiral turns having zinc coating 120 GSM with 125 clips per coil of 1.6 mm thickness .The approximate weight of Concertina coil shall be 8.50 Kg per Running Metre and could be stretched to cover a distance of 6 to 7 running metres fixed at 3.00 m height wall on angle iron Y shaped which is placed 2.40 m to 3.0 m above the ground level complete all as specified and directed. Note- The measurments shall be recorded for the stretched length of Concertina coil.The contractor shall quote his rate accordingly. (The contractor shall submit test certificate from Govt approved Labortory for Concertina coil)

Material and Labour for preparation of Old decorated surfaces of Walls including brooming down or steel wire brushing, scrapping down smoke, soot, module, moss and efflorescence salt, etc and applying One coat of cement base paint Complete all as specified and directed.

Demolition concrete (unreinforced) in ground floors & paving n exc 15cm thickness(below or above GL)

M & L for framed work such as grill, gratings, etc with ends of bars shoulderedand /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work corn-conforming to Fe.290. Gde -E-165, complete all as specified and directed.

Demolation of Stone slabs laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed by Engineer-in-charge.

M&L for 75 mm thick PCC 1:4:8 (40 mm graded aggregate) type D2 as in sub- base of floor complete all as specified and directed.

M & L for sand filling pathway in layers n. exc 30cm thick, including watering and consolidation complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment laid over and including machine compacted sand cushion all as specified and directed. etc complete.

Supply & Fix machine pressed Pre-cast cement concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 Grade with grey cement and no pigment, colour laid over and including machine compacted sand cushion all as specified and directed.

Material and labour for 20mm thick screed bed or bedding layer in cement mortar 1:4 for laying of tiles, complete all as specified and directed.

Demolition of cement Concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.(reuinforcement cut as required to facilitate demolition)

Material and labour for Chequered cement concrete tiles 20cmx20cmx25mm thick, set, jointed and pointed with white cement and pigment in floors, complete all as specified and directed.

M&L for Providing, precast cement concrete 1:2:4 Type B-1(20 mm graged crushed stone aggregate) as in manholes cover slab, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in cement mortar 1:4 complete with joints to match complete all as specified

M&L for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for Preparation of old surface and applying one coat of white washing on Ceiling. Note : Preparation including brooming down or steel wire brushing scrapping down smoke soot moulds moss and efflorescent salts and trading oil and greasy spots, removing of nails, cracks making good holes by putty etc, spreading and removing coverings to doors, windows, floors fittings to protect them from splashes, washing floors, cleaning glass, joinery, fittings, drops, splashes, leaving premise clean and tidy etc. complete all as specified

All as per serial item No.93 above but applying one coat of white washing on wall.

All as per serial item No.93 above but applying one coat of oil bond distempering with emulsion on ceiling.

All as per serial item No.93 above but applying one coat of oil bond distempering on walls.

All as per serial item No.93 above but applying one coat of cement base paint on walls

All as per serial item No.93 above but applying one coat of Plastic emulsion paint on walls.

Material & Labour for preparation and applying Two coats of Weather proof exterior emulsion paint of 1st quality over a coat of exterior primer over old surfaces including complete removing of existing surfaces of plastered wall surfaces by mechanical method and wash/scrubbing on granuale finished surfaces to safeguard of the granuale finishes etc. complete all as directed.

M&L for Preparation of old painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic enamel paint all as specified.

All as per serial item No.100 above ,but, applying one coat of Synthetic varnish.

M&L for Preparation of old painted surface of steel surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic enamel paint all as specified.

M&L for Preparation of old painted surfaces of brick, stone, concrete, asbestos cement or plaster surfaces of any description, not otherwise described, over 10 cm girth or width not otherwise described and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified.

M&L for rendering rendering 10mm thick cement plaster in CM 1:6 on fair faces brick work or concrete surfaces and finishing the surface even & smooth without using extra cement

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint including one coat of Birla white putty on plastered surfaces etc. complete all as specified.

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified.

S&F Aluminium alloy anodised Sliding bolt 300mm long with hasp, staple(bolt type and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as directed by Engr-in-Charge.

S&F Aluminium (Extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as directed by Engr-in-Charge.

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including takingdown existing one etc complete all as specified and as directed by Engr-in-Charge.

S&F Floor door stopper 150mm length of cover plate aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in doors , complete all as specified and directed.

M/s SL CONSTRUCTION

VARALAKSHMI CONSTRUCTIONS