Construction of 750 MT Cold Storage Godown at Tirhut Sabji Sangh Areraj Motihari.

Technical evaluation sheet (e-tender SBD) BIHAR STATE WAREHOUSING CORPORATION, BIHAR, PATNA. TECHNICAL BID EVALUATION SHEET

MANDATORY CONDITIONS

Name of work :- Construction of 750 MT Cold Storage Godown at Tirhut Sabji Sangh Areraj Motihari.

Estimated Cost :- Rs. 3,44,59,737.00

Earnest Money :- Rs. 6,89,195.00

Time of completion :- 12 Months

Sl.No. Particulars LAID DOWN CRITERIA AS PER S.B.D / N.I.T Evaluation Criteria (Mandatory/ Optional) BIDDER

DETAILS Remarks (Responsive/ Non Responsive) Ref. Page

1 Name and address of agency

2 Registration no. & department The contractor must be registered with Central Govt./State Govt./Public Undertakings/Or be of Intrnational Level. Mandatory

3 Legal Status of Bidder Individual / Partnership Firm / Pvt. Ltd./Public Ltd. / Mandatory

4 Power of Attorney Name of Authorized Person to Sign Holding Power of Attorney (If any)

5 Clause-16.1(d) of SBD : BID SECURITY (Earnest Money) Must submit Earnest Money of Rs …………………... in the form as specified in N.I.T. Mandatory

6 PAN Card Must quote PAN and attach I.T Return of previous finanacial year. Mandatory

7 GST Registration Must possess GST registration. Mandatory

8 Clause-4.5A(a) of SBD Must have in any one year a Minimum Annual Financial Turnover (in all classes of civil engineering construction works only) of amount of construction work ,which must be at least equal to 50 % of estimated cost of work for which bid has been invited (i.e. Rs ........................... for this tender). Mandatory

: Annual Financial Turnover 2022-23

9 Clause-4.5A(b) of SBD Satisfactorily completed as a prime contractor (or as a nominated sub-contractor, where the sub- contract involved execution of all main items of work described in the bid document, provided further that all other qualification criteria are satisfied)at least one similar work of value not less than 50% of estimated value of contract (i.e. Rs ..................... for this tender). Mandatory

: Experience of Work of Similar Nature.

10 Clause-4.5A(c) of SBD Executed in any one year , the minimum quantities of the following items of work (as indicated in the Technical Bid Form).

: Experience of Major Items of Work.

Over all for this criteria [Clause-4.5A(c)]

11 Amount of Existing Commitments and On going Works. Attach as per Section-2--1.4(A) (Bidder must declare themselves their all existing commitment hiding fact sufficient cause for rejection) Mandatory

12 Amount of Works for which Bid already Submitted. Attach as per Section-2--1.4(B) Mandatory

13 Clause-4.7 of SBD : Bidding Capacity. The bidder must have available Bidding Capacity more than the bid value, i.e. ……………………………. (= A x N x 3 - B) Mandatory

14 Clause-4.5B(a) of SBD (i) Concrete Mixture with Integral Weigh Batching Facility-2 Nos (age-5 year). Mandatory

(ii) Vibrator (Plate & Niddle)- 4 Nos. (age-5 year). Mandatory

: Plants and equipments .

(iii) Water Tanker- 1 No. (age-5 years). Mandatory

(iv) Steel Shuttering- 3000 sft (age-5 years). Mandatory

Over all for this criteria [Clause-4.5B(a)]

15 Clause-4.5B(b) of SBD Must have Engg. Setup as per Technical Bid

Site Engineer B.E. (Civil) + 03 Years Exp. (3 years in Building Construction ) or Diploma in Civil + 07 year Exp. in Building Construction or Retired A.E.- 1 No. Mandatory

: Key Personnels and their experience.

Site Supervisor/Fresh Graduate in Civil or Diploma Civil + 02 Years Exp. Or Retired ITI Holder - 2 Nos. Mandatory

Over all for this criteria [Clause-4.5B(b)]

16 Clause-4.2(i) of SBD Evidence of access to or availability of credit facilities (minimum 10% of the estimated cost, i.e. Rs ………………….) certified by the bankers. Mandatory

17 Clause-12.1 (iv) of SBD : (As per Section- 2 of SBD) Attached affidavit as Perscribed in Section-2 of SBD on and after date of Tender. Mandatory

18 Clause-4.2(ii) of SBD Undertaking that the bidder would be able to invest a minimum of cost upto 25% of of the contract value during implementation of the contract. Mandatory

19 Litigation History Attach Affidavit as prescribed in Section-2 on and after date of Tender. Mandatory

20 NOC for Debar Attach Self Declaration. Mandatory

21 Programme of Construction Attach Descriptions, Drawings and Charts as necessary. Mandatory

22 Character Certificate Attach valid Character Certificate issued from District Police Mandatory

BIHAR STATE WAREHOUSING CORPORATION

B-2, 1st Floor Mauryalok Complex, Patna-800001

Name of Work :- Construction of 750 MT Cold Storage Godown at Tirhut Sabji Sangh Areraj Motihari.

BILL OF QUANTITY

Cost of BOQ : Rs. 10,000.00 with 18% GST, Beltron Processs Fee : As per eproc 2 (Non Refundable)

Amount of BOQ : Rs. 3,44,59,737.00 Amount of EMD : Rs. 6,89,195.00

Sl. No. SOR NO. Item of Work Unit Quantity Rate

1 20.2.1 Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap M 252 Rupees Nine Hundred Two Paise Sixty Only

2 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

2.8.1 All kinds of soil M3 360.7 Rupees Three Hundred Sixty Paise Seventy Only

3 2.8.1 + 2.27.1 1.50 mts to 3.00 mts M3 428.94 Rupees Four Hundred Ten Paise Ten Only

4 2.6 Earth work in excavation over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth tobe levelled and neatly dressed.

2.6.1 All kinds of soils M3 Rupees Three Hundred Fourteen Paise Ninety Only

5 Supplying and filling in plinth with local sand and under floors including watering, ramming consolidating and dressing complete. M3 287.3 Rupees Two Hundred EightySeven Paise Thirty Only

6 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, M2 283.3 Rupees Two Hundred Eighty Three Paise Thirty Only

7 4.1 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.

4.1.2 1:1.5:3(1 Cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) M3 4420.8 Rupees Four Thousand Four Hundred Twenty Paise Eighty Only

4.1.3 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) M3 3998.1 Rupees Three Thousand Nine Hundred NinetyEight Paise Ten Only

8 Separation Membrane of impermeable plastic sheeting 125 micron thick M2 788.495 Rupees Twelve Only

9 Operational charges for vaccum dewatering system I/C screed vibration, placing of filtermat, top mat, vaccum process, ploating, trowelling, Brooming etc. including T&P charges I/C consumable power charges, loading & Unloading etc. complete. M3 168.7 Rupees One Hundred SixtyEight Paise Seventy Only

10 5.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- All work upto plinth level.

5.1.1 1:1:2 (1 Cement : 1 Local sand : 2 Graded stone agregate 20mm Normal size M3 5961.9 Rupees Five Thousand Nine Hundred SixtyOne Paise Ninety Only

11 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement.

5.2.1 1:1:2 (1 Cement : 1 Coarse Sand : 2 Graded stone aggregate 20 mm nominal size.) M3 6943.5 Rupees Six Thousand Nine Hundred FourtyThree Paise Fifty Only

5.2.2 1:1.5:3 (1 Cement 1.5 Coarse sand : 3 Graded stone aggregate 20 mm nominal size) M3 5670 Rupees Five Thousand Six Hundred Seventy Only

12 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size). M3 41.6625 Rupees Five Thousand Three Hundred ThirtyFive Paise Ninety Only

13 5.33B.1 Providing M-15 grade RCC instead of M-20 grade RCC (Add of deduct) M3 164.5 Rupees One Hundred SixtyFour Paise Fifty Only

14 5.33B.4 Providing M-15 grade R.C.C. Instead of M-20 grade R.C.C. M3 383.8 Rupees Three Hundred EightyThree Paise Eighty Only

15 6.1 A Brick work with bricks of class designation 100A in foundations and plinth in:

6.1.12/1 Cement mortar 1:4 (1 cement : 4 coarse sand) M3 Rupees Five Thousand Seventeen Paise Ninety Only

16 6.1.14 A Cement Mortar 1:6 (1 cement : 6 coarse sand) M3 66.63 Rupees Four Thousand Eight Hundred Nineteen Paise Ninety Only

17 6.3 A Extra for Brick work in uperstructure above plinth level upto floor V cum M3 66.63 Rupees Eight Hundred FourtyTwo Paise Twenty Only

18 Centring and shuttering including strutting propping etc. and removal of form for.

5.9.1 Foundations, footings, bases of columns etc. for mass concrete. M2 211.6 Rupees Two Hundred Eleven Paise Sixty Only

5.9.6 Columns,Pillars, Piers, Abutments, Posts and Struts M2 454.02 Rupees Four Hundred NinetyFour Paise Fourty Only

5.9.5 Lintels, beams, plinth bams, griders, bressumers and contilevers. M2 404.7 Rupees Four Hundred Four Paise Seventy Only

5.9.3 Suspended floors, roots, landings, balcnies and access platform. M2 437.5 Rupees Four Hundred ThirtySeven Paise Fifty Only

5.9.19 Chajjas M2 6.775 Rupees Five Hundred Fifty Paise Ninety Only

19 Providing MS reinforcement as per approved design and drawing including carriage of MS road (Straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing he rods in position all complete as per Building Specifications and direction of the E/l.

5.22.7 A Thermo-Mechanically treated bars TMTC-500-8 mm dia Kg 6763.76 Rupees NinetyFour Paise Fifty Only

5.22.7B Thermo-Mechanically treated bars TMTC-500-10 mm dia Kg 92.6 Rupees NinetyTwo Paise Sixty Only

5.22.7C Thermo-Mechanically treated bars TMTC-500-12 mm dia Kg 90.8 Rupees Ninety Paise Eighty Only

5.22.7D Thermo-Mechanically treated bars TMTFe-500-16mm Dia Kg 91.7 Rupees NinetyOne Paise Seventy Only

20 Structural steel work in single section fixed without connecting plate including cutting hosting fixing in position and applying a priming coat of approved steel primer all complete. Kg 88.3 Rupees EightyEight Paise Thirty Only

21 12 mm cement plaster of mix:

13.11.1 1:3 (1 cement : 3 coarse sand) M2 164.3 Rupees One Hundred SixtyFour Paise Thirty Only

22 Neat Cement Punning M2 40.5 Rupees Fourty Paise Fifty Only

23 6 mm cement plaster to ceiling of mix

13.24.2 1:4 (1 cement : 4 coarse sand) M2 125.6 Rupees One Hundred TwentyFive Paise Sixty Only

24 13.11.4 1:6 (1 cement : 6 coarse sand) M2 890.715 Rupees One Hundred FourtyOne Paise Fifty Only

25 13.13.4 20mm Cement plaster of mix (1:6) M2 192.1 Rupees One Hundred NinetyTwo Paise Ten Only

26 White washing with lime to give an ever sha

13.70.1 New work (three or more coats) M2 Rupees Eighteen Paise Ninety Only

27 Applying one coat of cement primer of approved brand and manufacture on wall surface

13.78.1 Cement primer M2 38.6 Rupees ThirtyEight Paise Sixty Only

28 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade

13.79.1 New work (three or more coats) M2 81.2 Rupees EightyOne Paise Twenty Only

13.79.2 Old work (one or more coats) M2 61.1 Rupees SixtyOne Paise Ten Only

29 Applying priming coat

13.81.3 With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel work M2 34.6 Rupees ThirtyFour Paise Sixty Only

30 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:

13.82.1 New steel work (two or more coat M2 93.8 Rupees EightyThree Paise Fifty Only

32 STEEL ,DOOR & WINDOW WORK

13.92 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:

13.92.1 Two or more coats on new work M2 86.4 Rupees EightySix Paise Fourty Only

33 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete.

11.41.1 Size of Tile 50x50 cm. M2 6.3 Rupees One Thousand Five Hundred FiftyFour Paise Fifty Only

36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. M2 28.14 Rupees Seven Hundred NinetyFive Only

39 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

9.48.2 Fixed to openings/ wooden frames with rawl plugs screws etc KG 161.1 Rupees One Hundred SixtyOne Paise Ten Only

40 9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 (1cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Each 0 Rupees One Hundred Thirty Paise Eighty Only

41 10.2 Structural steel work riveted or bolted in built up sections, trusess and framed work, including cutting,hoisting,fixing in position and applying a priming coat of approved ateef primer all complete. Kg 95.4 Rupees NinetyFive Paise Fourty Only

42 Supplying and fixing rolling shutters of approved make, make of required size of M.S. laths inter locked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs grade no.2 and M.S. top cover of required thickness for rolling shutters.

10.6.1 80x1.25 mm M.S. Laths with 1.25mm thick top cover M2 36 Rupees Two Thousand Six Hundred SeventyThree Paise Seventy Only

10.7 Providing and fixing ball bearing for rolling shutters M2 36 Rupees Two Thousand Six Hundred SeventyThree Paise Seventy Only

45 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

10.16.1 Hot finished welded type tubes Kg 123.9 Rupees One Hundred TwentyThree Paise Ninety Only

48 Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

10.32.2 In gratings, frames, guard bar, ladders, raillings, brackets, gates & similar works. Kg 114.6 Rupees One Hundred Fourteen Paise Sixty Only

50 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. M2 1219.54 Rupees Six Hundred TwentyFive Paise Ten Only

51 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15- 18 microns using self drilling/ self tapping screws complete

12.51.1 Ridges plain (500 - 600mm) Sqm 396.8 Rupees Three Hundred NinetySix Paise Eighty Only

12.51.6 Gutter (600 mm over all girth mtr 86.02 Rupees Eight Hundred NinetyEight Paise Seventy Only

53 Providing and fixing Aluminium work for Doors, Windows

21.1.1.1 Anodised aluminium (Fixed Portion) kg 386.1 Rupees Three Hundred EightySix Paise Ten Only

21.1.2.1 Anodised Aluminium (Shutters) kg 447.2 Rupees Four Hundred FourtySeven Paise Twenty Only

54 Providing and fixing 12 mm thick relaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

21.2.2 Pre-laminated particle board with decorative lamination on both sides M2 3.225 Rupees Eight Hundred TwentySix Paise Ninety Only

55 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / eoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

21.3.1 With float glass panes of 4.0 mm thickness M2 2.855 Rupees Eight Hundred Nine Paise Thirty Only

56 Providig & fixing 1mm thick M.S Sheet door with frame of 40x40x6mm angle iron and 3mm Msgusset plates at the junction and corners.all necessary fittings complete including applying a priming coat of approved steel primer.

10.5.1 Using M.S. angle 40x40x6 mm for diagonal braces M2 3653 Rupees Three Thousand Six Hundred FiftyThree Only

10.5.2 Using flats 30x6 mm for diagonal braces and central cross piece. M2 1.935 Rupees Three Thousand Four Hundred SixtySeven Paise Ninety Only

57 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

13.94.1 Two or more coats on new work over an under coat of suitableshade with ordinary pain+ of approved brand and manufactur M2 116.5 Rupees One Hundred Sixteen Paise Fifty Only

58 Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints ( 10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately M3 33.75 Rupees Four Thousand Six Hundred FourtyNine Only

59 Construction of granular sub-base by providing close gradedMaterial conforming to specifications, mixing in a mechanical mixplant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge

With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 M3 Rupees One Thousand Three Hundred Ten Paise Fourty Only

60 Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge. M3 1251.5 Rupees One Thousand Two Hundred FiftyOne Paise Fifty Only

61 2.3 Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with 1/2 tone roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tones and dressing up; in embankments for roads, flood banks, marginal banks, and guide banks etc. lead up to 50 m and lift up to 1.5m.

2.3.1 All Kinds of soil M3 224 Rupees Two Hundred TwentyFour Only

62 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering lead. M3 123.9 Rupees One Hundred TwentyThree Paise Ninety Only

11.78 Providing and laying factory made coloured chamfered edge Cement Concrete paver blocks of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern,finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc.complete as per manufacturer’s specifications & direction of Engineer-in-Charge. 60mm thick C.C.paver block of M-35 grade with approved colour, design & pattern M2 714 Rupees One Hundred TwentyThree Paise Ninety Only

63 17.1 Providing and fixing water closet squatting pan (Indian type W.C pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required:

17.1.1 White Vitreous china Orissa pattern W.C pan of size 580x440mm with integral type foot rests. Each 2 Rupees Four Thousand Four Hundred Seventy Paise Ninety Only

64 Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete including cutting and making godo the walls and floors wherever required:

17.2.1 W.C pan with ISI marked white solid plastic seat and lid Each 0 Rupees Four Thousand Two Hundred Thirty Only

65 17.4 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushign cistern with standad flush pipe and C.P brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.

17.4.1 One urinal basin with 5 litre white P.V.C automatic flushing cistern. Each 2 Rupees Three Thousand Seven Hundred TwentyThree Paise Twenty Only

66 Providing and fixing wash basin with C.I brackets, 15mm C.P brass pillar taps, 32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

17.7.1 White Vitreous China Wash basin size 630x450mm with a pair of 15mm C.P brass pillar taps. Each 2 Rupees Two Thousand Seven Hundred SixtyFour Paise Fourty Only

67 Provding and fixing PVC waste pipe for sink & wash basin including PVC waste fittings complete

17.28.2 Flexiable pipe

17.28.2.2 40 mm dia Each 2 Rupees One Hundred Four Paise Fourty Only

68 17.31 Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete. Each 0 Rupees One Thousand SixtyEight Paise Fifty Only

69 17.35 Provding and fixing PVC Soil ,Waste & vent pipes all complete

17.35.1.2 110 mm dia metre 5 Rupees One Thousand ThirtySix Paise Fifty Only

70 Provding and fixing PVC fittings all complete as/specification & directionof E/I

12.79.3.2 110 mm dia door tee Each 2 Rupees One Hundred NinetyThree Paise Fourty Only

12.79.5.2 110 mm bend Each 6 Rupees One Hundred ThirtyTwo Only

71 12.80.2 110 mm pipe clip Each 8 Rupees One Hundred EightyTwo Paise SeventyTwo Only

74 Providing and fixing PTMT liquid soap container 109mm wide,125mm high and 112mm distance from wall of standard shape with bracket of the same materials wwith snap fittings of approved quality and colour,weighing not less than 105gms. Each 2 Rupees One Hundred FourtySix Paise Thirty Only

75 Providing and fixing PTMT towel ring trapezodial shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. Each 2 Rupees Two Hundred Four Paise Seventy Only

76 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the wall etc.

(A) 18.10.2 20 mm dia. Nominal bore Metre 15 Rupees Two Hundred EightyNine Paise Fifty Only

(B) 18.10.4 32mm dia nominal bore Metre 15 Rupees Four Hundred FiftySeven Paise Eighty Only

77 Concealed pipe including with anti corrosive bitumatic paint, cutting chases and making good the wall.

(A) 18.11.1 15 mm dia. Nominal bore Metre 12 Rupees Three Hundred Eighteen Paise Ninety Only

(B) 18.11.2 20 mm dia. Nominal bore Metre 3 Rupees Three Hundred SeventyFour Only

78 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.

(A) 18.12.4 32mm dia nominal bore Metre 30 Rupees Three Hundred EightyOne Paise Seventy Only

79 Making connecting of G.I. distribution branch with G.I. Main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete.

(A) 18.13.1 25 TO 40 mm Nominal bore Each 1 Rupees Four Hundred FourtySix Paise Seventy Only

80 Providing and fixing brass stop cock of approved quality

(A) 18.16.2 20 mm Nominal bore Metre 2 Rupees Three Hundred TwentyEight Only

81 Providing and fixing gun metal gate valve with C.I. wheel of approved quality.

(A) 18.17.2 32mm nominal bore Each 2 Rupees Five Hundred EightyNine Paise Ninety Only

82 18.19 Providing and fixing metal non-return valve of approved quality.

18.19.2 32 mm nominal bore

(A) 18.19.2.1 Horizontal Each 1 Rupees Six Hundred SeventySeven Paise Sixty Only

83 Providing and fixing uplasticised PVC connection pipe with brass unions.

18.21.2 45 cm length

18.21.2.1 15 mm Nominal bore Each 6 Rupees EightyFive Paise Twenty Only

84 Constructing masonry chamber 30x30x50 cm, inside with 75 class disignation brick work in cement mortar 1:5 (1 cement :5 fine sand) for stop cock, with C.I. surface box 100x100x75 mm with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :3 coarsesand :4 graded stone aggregate 20 mm nominal size) necessary sand :4 draded stone aggregate 20 mm nominal :5 fine sand :10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard disign.

18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 100A Each 2 Rupees One Thousand One Hundred SeventySeven Paise Ninety Only

85 Painting G.I. pipe and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work.

(A) 18.38.2 20 mm diameter pipe Metre 15 Rupees Thirteen Paise Ninety Only

(B) 18.38.4 32mm diameter pipe Metre 15 Rupees TwentyOne Paise Sixty Only

86 18.4 Painting G.I pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality:

(A) 18.40.4 32mm diameter pipe Metre 30 Rupees Eleven Paise Eighty Only

87 Providing and filling sand of grading zone V or coarser grade all round the G.I pipes in external work.

(A) 18.41.4 32mm diameter pipe Metre 30 Rupees TwentyOne Paise Sixty Only

88 Providing and fixing G.I. union in G.I.pipe including cutting and threading the pipe and making long screws etc.

(A) 18.47.2 20 mm dia. Nominal bore Each 4 Rupees Three Hundred NinetyNine Paise Thirty Only

(B) 18.47.4 32mm nominal bore Each 3 Rupees Five Hundred Nineteen Paise Seventy Only

89 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI:12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Per Litre 1000 Rupees Nine Paise Seventy Only

90 18.49.1 Providing and fixing C.P brass bib cock of approved quality conforming to IS:8931. 15mm nominal bore Each 2 Rupees Four Hundred ThirtyFour Paise Twenty Only

91 Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

18.53.1 15mm nominal bore Each 2 Rupees Five Hundred Paise Fourty Only

92 18.58 Providing and fixing PTMT grating of approved quality and colour.

18.58.1 Circular type

18.58.1.1 100mm nominal dia. Each 4 Rupees ThirtyThree Paise Twenty Only

93 19.6 Providing and laying non -pressure NP2 class R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 including testing of joints etc.

94 19.30 Constructing brick masonry chamber for underground C.I inspection chamber and bends with 75 class designation bricks in cement mortr 1:4( 1 cement: 4 coarse sand) C.I cover with frame (light duty) 455x610mm internal dimensions, total weight of cover with frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg) R.C.C top slab ith 1:2:4 mix ( 1 cement: 2 coarse sand:4 graded stone aggregate 20mm nominal size) foundtion concrete 1:5:10( 1 cement: 5 fine sand:10 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:

19.30.1 Inside dimensions 455x610mm and 45cm deep for single pipe line:

19.30.1.1 With F.P.S bricks Each 4 Rupees Four Thousand Two Hundred SixtySix Paise Eighty Only

95 19.31 Extra for depth beyond 45cm of brick masonry chamber:

19.31.1 For 455x610mm size

19.31.1.1 With F.P.S bricks Metre 0 Rupees Three Thousand Nine Hundred FourtySix Paise Twenty Only

96 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design

19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1 Rupees ThirtyThree Thousand Six Hundred Three Paise Fourty Only

105 Supplying and stacking at site.

16.3.3 53 mm to 22.4 mm size stone aggregate M³ 883.7 Rupees Eight Hundred EightyThree Paise Seventy Only

16.3.10 Moorum M³ 431.2 Rupees Four Hundred ThirtyOne Paise Twenty Only

106 16.4 Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required den M³ 487 Rupees Four Hundred EightySeven Only

107 Providing Retro-reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate antitheft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge Each 2 Rupees Six Thousand Six Hundred Six Paise Seventy Only

26.41 Designing, providing, installing and fixing factory finished custom designed cold form Light Gauge Steel Framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. The steel sheet shall be galvanized (AZ-150 gms Aluminum Zinc Alloy coated steel having minimum yield strength 300- 550 Mpa) conforming to AISI specifications and IBC 2009 for cold formed steel framing and construction and also as per IS: 875-1987, ISO 800-1984 and IS: 801- 1975. The wind load shall be as per provisions of IS 875 (part -III). LGSFS frame shall be designed as per IS: 801 using commercially available software such as Frame CAD Pro-11.7/ STAAD PROV8i/ ArchitekV2.5.16/ Revit architecture-2011 or equivalent. Proper usage of Connection Accessories like Heavy Duty Tension Ties, Light kg 217.5 Rupees Four Hundred FourtySeven Paise Twenty Only

Duty Hold-ons, Twist Straps (to connect truss with wall frames), Strong Tie, Tie Rod, H-Brackets, Boxing Sections, L-Shaped Angles for better structural stability. The framing section shall be cold form C-type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple/slot at required locations as per approved drawings. The slots will be along centre line of webs and shall be spaced minimum 250mm away from both ends of the memberThe frame can be supplied in panelized or knock down condition in specific dimensions and fastened with screws extending through the steel beyond by minimum of three exposed threads. All self drilling tapping screws for joining the members shall have a Type II coating in accordance with ASTM B633(13) or equivalent corrosion protection of gauge 10 & 12, TPI 16 & 8 of length 20mm. The frames shall be fixed to RCC slab or Tie beam over Neoprene rubber using self expanding carbon steel anchor bolt of dia as per approved drawings. design subject to minimum 12mm diameter and 121mm length conforming to AISI 304 and 316 at 500mm c/c with minimum embedment of 100mm in RCC (RCC to be paid separately) and located not more than 300mm from corners or termination of bottom tracks complete in all respects. The item also includes the submission of stability reports duly examined and issued by any NIT/IIT. The rate includes the concept design, detailed design, fabrication of sections, transportation, installation and all required fixing arrangement at site as described abo

26.43.1 Providing and fixing internal wall panels on Light gauge steel frame work with 12.5mm thick gypsum plaster board conforming IS 2095:2011 fixed on cement board as per standard sizes fixed with selfdrilling / taping screws / fasteners @ 60cm c/c of approved make, Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. Proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately Sqm 328.59 Rupees Seven Thousand Nine Hundred Eight Only

110 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

12.78.2 110mm diameter Metre 41.6 Rupees Two Hundred FiftySeven Paise Fifty Only

111 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

a) 12.79.1 Coupler

12.79.1.2 110mm Each 8 Rupees One Hundred Twenty Only

12.79.5.2 110mm bend Each 4 Rupees One Hundred ThirtyTwo Only

c) 12.79.6 Shoe (Plain)

12.79.6.2 110mm Shoe Each 6 Rupees One Hundred Fifteen Paise NinetyFive Only

112 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diameter and weighing not less than 440 grams. Each 2 Rupees FourtySeven Paise Ninety Only

113 Boring by jet or dhikhi by suitable cutter or reducer as the case may be and lowering pipe 125 x 50 mm P.V.C blue cosing pipe & strainer of standard quality P.V.C. shoe plug & socket etc all complete job.

(a) For 125 mm dia U.P.V.C pipe M 30.5 Rupees Three Hundred TwentyFive Only

(b) For 50mm dia U.P.V.C pipe

(i) 30.5 to 61.0 m M 30.5 Rupees Two Hundred Fifteen Paise Eighty Only

(ii) 61.0 to 91.50 m M 20 Rupees Two Hundred ThirtyFour Paise FiftySeven Only

2 Supplying and fitting at the following u.P V.C pipes of appd. Quality and make.

(a) 125 mm dia U.P.V.C pipe M 30.5 Rupees Three Hundred ThirtyFive Only

(b) 50 mm dia U.P.V.C pipe M 26.5 Rupees One Hundred Fourty Only

(c) 50 mm dia P.V.C strainer M 24 Rupees One Hundred SixtyFive Only

3 Providing all materials tools & labours and fixing the following fittings etc all complete job.

(a) 125 mm dia P.V.C Well cap Each 1 Rupees SixtyFive Only

(b) 50 mm dia P.V.C shoe plug Each 1 Rupees Eighty Only

(c) 125x50mm P.V.C reducer Each 1 Rupees One Hundred Sixty Only

4 Supplying all equipment tools and labour for developing of the T/W Each 1 Rupees Two Hundred TwentyEight Only

5 Supplying all materials and labours for arrangement fo additional water required during the drilling work Each 1 Rupees Five Hundred Only

6 S/F/F of G.I. pipes with red lead and yarn of following six on walls etc and complete job.

15 mm dia M 10 Rupees One Hundred One Paise Seventy Only

25 mm dia 20 Rupees One Hundred EightyTwo Paise FiftyThree Only

7 Transporation of materials & labour from store to work site & back to store if materials is surplus Each 1 Rupees Two Hundred Only

8 providing and fixing gun metal fullway valve of appd. Make all complete job.

25 mm dia Each 4 Rupees Two Hundred Ten Paise NinetyFive Only

9 Providing and fixing G.M. non return valve of appd. Quality all complete job.

25 mm dia (H) Each 2 Rupees Two Hundred Thirty Only

10 S/F/F of 1 H.P. submersible pump with all accessories as panel board starter, switch board electric wire etc. all complete job. Each 1 Rupees TwentySix Thousand Four Hundred Only

114 1.3.3B point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.l. box etc as required. Meter 16 Rupees FiftySeven Only

115 Wiring for power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in recessed PVC conduit along with 1 No.4 sq mm FR PVC insulated copper conductor single core cable for loop earthing as required. Meter 35 Rupees One Hundred Seventy Only

116 1.7.1 Wiring for circuit/ submain wiring alongwith earth wire wit the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Meter 40 Rupees FiftySeven Only

117 1.7.2 Wiring for circuit/ submain wiring alongwith earth wire wit the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Meter 30 Rupees EightyFour Only

1.7.4 Wiring for circuit/ submain wiring alongwith earth wire wit the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 6 sq. mm + 1 X 6sq. mm earth wire Meter 25 Rupees EightyFour Only

118 Supplying & fixing following size ISI marked PVC conduit with accessories in recess including cuting of wall and making good the same as required.

1.21.1 (a) 20 mm dia Meter 25 Rupees FourtyTwo Only

119 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as req uired Each 4 Rupees FourtyTwo Only

1.32 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as req uired Each 3 Rupees FourtyTwo Only

1.16.2 Supplying and drawing following pair 0.5 sq. mm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed PVC conduit as required. Meter 45 Rupees Three Hundred SeventySix Only

121 1.24.6 Supplying and fixing following modula'r switch/ socket on the existing modular plate & switch box including connections but excluding modular plate.etc. as required Telephone socket outlet Each 3 Rupees Three Hundred SeventySix Only

122 Supplyinq and fixinq call bell I buzzer suitable for single phase, 230 volts complete as required Each 1 Rupees One Hundred TwentySix Only

123 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCBilsolator)

124 2.8.1 2+4 way, Single door Each 1 Rupees Twenty Only

125 2.8.2 8 way, Double door Each 1 Rupees FourtyNine Only

128 Supplying and fixing of following rating 240 Volt B series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete witth connections ,testing and commissioning etc. as required .

2.12.1 6 Amp. To 32 Amp. SP MCB Each 12 Rupees One Hundred FiftySix Only

2.12.2 32 Amp SPN MCB Each 1 Rupees Two Hundred NinetyNine Only

129 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for eafth electrode to fill up the excavated earth and earth inspection pit etc. as required Set 2 Rupees Two Thousand Eight Hundred Three Only

131 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. Meter 30 Rupees One Hundred SeventyTwo Only

133 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/,switch box including connections but excluding modular plate etc. as required Each 3 Rupees FourtyFour Only

134 Erection of wall bracket / ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required Each 2 Rupees One Hundred NinetyTwo Only

137 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 270 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required Each 3 Rupees Two Thousand FiftyFive Only

138 8.17.1 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required 300 mm sweep Each 3 Rupees One Thousand Two Hundred NinetyFour Only

139 Supplying and fixing replaceable compact commercial batten suitable for Single TB LED tube complete with 20 watt LED polycarbonate TB tube with built in driver etc. directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required Each 5 Rupees Three Thousand Two Hundred SeventyEight Only

140 6.1.6 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required.15 watt LED lamp. Each 5 Rupees Six Hundred TwentyTwo Only

141 Carriage of Materials

Bricks %0 Nos. 107896 0.399 Rupees Eight Hundred Twenty Paise SeventyThree Only

Stone Chips M3 #,##0.399 0.200 Rupees One Thousand Seven Hundred SixtyFive Paise SixtyNine Only

Stone Metal M3 0.999 Rupees One Thousand Eight Hundred SixtyTwo Paise TwentyFive Only

Coarse Sand M3 0.200 Rupees Two Thousand Six Hundred TwentyTwo Paise ThirtyFour Only

Local Sand M3 Rupees Two Hundred SeventySeven Paise Twenty Only

Screening Material M3 2441.04 Rupees One Thousand Five Hundred EightyThree Paise FourtyEight Only

Earth M3 Rupees Two Hundred Eighty Paise FiftyFour Only

Additional Cost Of Bricks %0 Nos. 107896 0.600 Rupees Eight Hundred Four Paise NinetyTwo Only

Additional Cost Of Cement MT Rupees NinetySeven Paise FiftySeven Only

Add GST 5.36% w.r.t bcd Sor 2022 for 18% instead of 12% GST (TOTAL E)

N.S-1 Providing and fixing 2 mm thick poly carbonate sheet panel 1000x1800 mm with and including turbo ventilators shall be with 24" dia neck , temprature difference 30 to 500 F, exhaust capacity 1500 cfm, coverage area 300 to 350 sqft and wind speed 3 to 50 KW/H having self lubricated teflon bush, blade fabricated with special grade s.s and venture dome etc of standard manufacturer. Each 6 Rupees Seven Thousand Nine Hundred Eight Only

N.S-2 Providing and fixing Insulated structure using 40 ± 2 kg/m³ density PUF panels with 120 mm thickness for walls and ceiling, and 100 mm insulated floor panels (XPS or PUF optional). Panels are finished with 0.5 mm PPGI sheets, fire-retardant grade, with cam-lock joints and tongue-and-groove assembly for thermal integrity. Aluminum coving and food-grade silicone sealants are used at joints and wall–floor edges (For cold room 6MX12MX6M) Each 5 Rupees Six Lakh FiftyTwo Thousand Only

N.S-3 Providing and fixing Heavy-duty sliding door, size approx. 1.5 m × 2.5 m, made of 100 mm PUF core, pre-coated GI skin, equipped with magnetic gaskets, internal safety latch, and heater strip for frost prevention. Includes stainless steel hardware, bottom roller guide, and threshold plate. Each 5 Rupees Sixty Thousand Only

N.S-4 Providing and fixing & Installing Complete refrigeration system comprising a 10–12 TR air-cooled condensing unit (scroll or semi-hermetic compressor) with eco-friendly refrigerant (R404A or R134a), and a ceiling-mounted evaporator unit with electric defrost heaters. Includes insulated copper refrigerant piping (liquid + suction), thermostatic expansion valve (TXV), solenoid valve, filter drier, mounting hardware, and brackets Each 5 Rupees Nine Lakh Fifty Thousand Only

N.S-5 Providing and fixing & Installing Advanced control panel with digital thermostat, temperature sensor, auto cut-off, HP/LP safety switches, and manual reset. Optional Wi-Fi/GSM data logger with remote monitoring, alarms, and cloud-based data storage Each 5 Rupees Sixty Thousand Only

N.S-6 Providing and fixing & Installing Includes IP65-rated LED vapor-proof lights (20–30 W), cold-room-grade copper wiring, MCBs, conduit accessories, switchgear, emergency alarm switch, internal signage, and electrical panel interconnection with cooling units Each 5 Rupees Sixty Thousand Only

N.S-7 Providing and fixing & Installing Includes condensate drainage lines (insulated PVC/SS), sloped toward external drain with trap, food-grade silicone sealant for all joints, and aluminum covings at floor–wall interfaces. Optional defrost drain heater for sub-zero versions Each 5 Rupees Thirty Thousand Only

N.S-8 Installation cost for Complete setup including PUF panel erection, cooling system installation, electrical panel wiring, gas charging, leak testing, and functional commissioning. Includes skilled manpower, tools, and safety compliance Each 1 Rupees One Lakh Only

N.S-9 Providing and fixing & InstallingInsulated chamber structure using 40 ± 2 kg/m³ density PUF panels — 120 mm thick for walls & ceiling, and 100 mm insulated floor panels (PUF or XPS). Panels are laminated with 0.5 mm pre-painted galvanized iron (PPGI) sheets, fire-retardant and moisture resistant. Cam-lock joints with tongue-and-groove assembly ensure tight insulation. Food-grade silicone sealant and aluminum coving provided at all joints and wall–floor transitions. For Precooling chamber (2.40Mx3.50Mx6M) Each 1 Rupees Two Lakh SixtyOne Thousand Only

N.S-10 Providing and fixing & Installing One heavy-duty insulated swing door (approx. 900 mm × 2000 mm) with a 100 mm thick PUF core, pre-coated GI cladding, magnetic gaskets, internal safety latch, and stainless steel hinges. Integrated heater strip to prevent frosting along seals. Threshold plate and floor guide included Each 1 Rupees TwentyEight Thousand Only

N.S-11 Providing and fixing & Installing Freon-based refrigeration system comprising: • 3 TR air-cooled condensing unit (hermetic or scroll type compressor) • Ceiling-mounted evaporator with high-static fan • Electric defrost heaters • Refrigerant piping (copper, insulated), TXV, filter drier, mounting hardware, vibration isolators • Pre-charged with eco-friendly refrigerant (R404A or R407C Each 1 Rupees Two Lakh Fifty Thousand Only

N.S-12 Providing and fixing & Installing Digital thermostat with temperature sensor, compressor cut-off control, HP/LP safety switches, manual reset, and provision for data logging. Optional GSM/Wi-Fi integration with remote monitoring and alarm notifications Each 1 Rupees Eighteen Thousand Only

N.S-13 Providing and fixing & Installing Two vapor-proof IP65 LED lights (20–30W), cold room-grade copper wiring, MCBs, conduit accessories, internal switches, and panel interconnection with the refrigeration unit. Includes alarm bell & service socket inside chamber Each 1 Rupees Thirty Thousand Only

N.S-14 Providing and fixing & Installing Condensate drain line using insulated PVC/SS pipes sloped to external drain with U-trap. Joints sealed with food-grade silicone, and aluminum floor coving provided. Optional defrost drain heater (if sub-zero storage is planned in futurechamber Each 1 Rupees Fifteen Thousand Only

N.S-15 Providing and fixing & Installing Industrial-grade transparent PVC strip curtains for energy conservation and airflow control at door Each 1 Rupees One Thousand Five Hundred Only

N.S-15 PUF panel installation, refrigeration system erection, cabling, gas charging, testing, and final commissioning. Includes skilled manpower, safety PPE, tools, and on-site supervisionairflow control at door Each 1 Rupees FourtyFive Thousand Only

N.S-16 Movable Handling Trolley Mild Steel Material Handling Trolleys, Load Capacity(kg) 250 kg Each 5 Rupees Two Thousand Five Hundred Only

N.S-17 F&V Grading Sorting Table To weigh upto 300 kgs with an accuracy of + or - 0.1 Kg with atleast 400X 600mm plat form Each 5 Rupees Twenty Thousand Only

N.S-18 Desaping Units (for Mango growers only) Top Rollers & Bottom tray is made of 304 grade stainless steel and support frame is made of galvanized iron duly powder coated rust proof paint.Size 7.5x3.5 and 3ft height and with 4inch whee Each 2 Rupees ThirtyFive Thousand Only

N.S-20 Plastic Dustbin: with Lid Medium Size Fitted complete along with handle. Each 10 Rupees Three Thousand Only

N.S-21 Other assets Small office table, three chairs, almairah L.S 1 Rupees Fifty Thousand Only

N.S-22 Sealing machines Nos 2 Rupees Three Thousand Only

N.S-23 Refractometer Nos 2 Rupees Two Thousand Only

N.S-24 Rectangular Industrial Ss Washing Trays Nos 10 Rupees Three Thousand Five Hundred Only

N.S-25 Other Items knife-4, scissors-2 L.S 1200 Rupees One Thousand Two Hundred Only

N.S-26 High pressure washer L.S 6000 Rupees Six Thousand Only

N.S-27 Miscellaneous Items as per need L.S 15000 Rupees Fifteen Thousand Only

N.S-28 Insulated Truck High end Refrigerated vehicle 5 MT L.S 1500000 Rupees Fifteen Lakh Only

N.S-29 Electrical Infrastructure & Backup HT/LT Connection, Transformer, DG Set 125 KVA L.S 2500000 Rupees TwentyFive Lakh Only

N.S-30 IT & software Setup CCTV, Biometric System L.S 100000 Rupees One Lakh Only

N.S-31 Safety & Licensing Setup Fire System, Approvals L.S 100000 Rupees One Lakh Only

G.Total (B+F+G)

Rupees Three Crore Fourty Four Lakh Fifty Nine Thousand Six Hundred Fifty Only

139 2 x 4'-28 watts flouresent fixture complete with all accessories and tube Cat. No TCS 350 / 228 C5 HF Philips / Bajaj / Crompton Equivalent approved make Each 16 Rupees Three Thousand Two Hundred SeventyEight Only

140 Bulk Head fitting Cat no NXC 101 of Philips Make complete with glass cover, wire guard, 60watts lamp etc. as required. Each 2 Rupees Six Hundred TwentyTwo Only

141 Carriage of Materials

Bricks %0 Nos. 0.361 Rupees Eight Hundred Twenty Paise SeventyThree Only

Stone Chips M3 0.226 Rupees One Thousand Seven Hundred SixtyFive Paise SixtyNine Only

Stone Metal M3 #,##0.275 _ * #,##0.84_ ;_ * \-#,##0.84_ ;_ * "-"??_ ;_ @_ Rupees One Thousand Eight Hundred SixtyTwo Paise TwentyFive Only

Coarse Sand M3 0.254 Rupees Two Thousand Six Hundred TwentyTwo Paise ThirtyFour Only

Local Sand M3 0.946 Rupees Two Hundred SeventySeven Paise Twenty Only

Screening Material M3 #,##0.356 _ * #,##0.20_ ;_ * \-#,##0.20_ ;_ * "-"??_ ;_ @_ Rupees One Thousand Five Hundred EightyThree Paise FourtyEight Only

Earth M3 Rupees Two Hundred Eighty Paise FiftyFour Only

Additional Cost Of Bricks %0 Nos. 0.361 804.92 Rupees Eight Hundred Four Paise NinetyTwo Only

Additional Cost Of Cement MT 0.679 Rupees NinetySeven Paise FiftySeven Only

Add GST 5.36% w.r.t bcd Sor 2022 for 18% instead of 12% GST

Bihar State Warehousing Corporation

B-2, 1st Floor Mauryalok Complex, Patna-800001

FINANCIAL BID FORM

COLORED CELLS TO BE FILLED IN BY CONTRACTOR

Name Of Work Construction of 750 MT Cold Storage Godown at Tirhut Sabji Sangh Areraj Motihari.

Amount of BOQ in Rs. 34459737

a If a bidder is willing to execute the works, say at the BOQ Amount, he/she must fill in "0" in front of 'in figures' and "ZERO" in front of 'in words' and "AT THE BOQ AMOUNT" in front of 'Above or below'

b If a bidder is willing to execute the works, say at 2.45 percent below the BOQ Amount he/she must fill in "2.45" in front of 'in figures' and TWO POINT FOUR FIVE" in front of 'in words' and "BELOW" in front of 'Above or below'

SI No. What to fill in the colour cells Fill in the four coloured cells below

1 Name of Contractor

2 Address of Contractor

3 Contact Phone No. Contractor

4 Percent above or below the BOQ Amount In figure

5 Above or below