Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | single bid₹3.9 LRejected-Finance NEAR BDA COLONY JATNI DIST KHORDHA PIN 752050 | JATNI | KHORDHA | ODISHA | 752050 | ₹3.9 L | single bid | Rejected-Finance Tender rejected |
| 2 | Rejected-Technical | - | - | Rejected-Technical Disqualified in TC Bid |
Tender Value
₹2.9 L
EMD Value
₹5,864
Closing Date
30 Sept 2024, 3:00 pmClosed
Executive Engineer (E), BSNL, Bhubaneswar
Door Sanchar Bhawan, Unit-IX, Bhubaneswar-751022
Fire Detection panel and fire extinguisher refilling etc.
2024_BSNL_208985_1
NIT No- 11/BSNL-EDB/2024-25
Open Tender
Electrical Works
Item Rate
30 days
Bhubaneswar
3 documents required · 3 mandatory
₹590
A O (Cash), BSNL, O/o GMTD, Bhubaneswar.
₹5,864
Yes
13 Nov 2024
21 Sept 2024
1 Oct 2024
21 Sept 2024
30 Sept 2024
21 Sept 2024
21 Sept 2024 - 27 Sept 2024
Amount
Supply, installation testing and commissioning of following Zones UL listed Microprocessor based Fire Alarm Control Panel Made of 16/18 SWG CRCA sheet powder coated, finish suitable for operation with 220V 50HZ AC mains power supply with standby battery backup 24Volt DC power supply and built in charger (without batteries) , normal operating voltage 24 v DC, compatible with all types of conventional detectors, manual call points and normally opened dry contact devices, 16X2 Dot matrix display, fully compatible with UL-864 and NFPA-72 etc. complete as required as per details specifications. (make- Agni Instruments Engineers (P) Ltd /GST / Honeywell / System sensor / Ravel)
12 Zone Main Fire Alarm Control panel without PA system
4 Zone Local Fire Alarm Control panel
SITC of 2nos 12V sealed maintenance free battery of not less than 7AH capacity with all accessories etc as reqd.(Exide /Amco/Superior)
Supply, installation, testing and commissioning of UL listed, CE certified 2 wire conventional Photo electric / Ionization type Smoke detector with base (Blinking LED type) made of ABS plastic with all accessories, suitable for operation on 24V DC, internal protection class: IP23, dual pulsing LED with 3600 visibility, relative humidity: ≤95%;non-condensing and EN54 compliance of approved make etc. as required. (Make- Apollo / GST/ Honeywell / System sensor)
Supply, installation, testing and commissioning of UL listed, CE certified 2 wire conventional Multi detector (fixed cum rate of rise heat Detector using a thermistor, raises an alarm when the detector reaches 590C (Fixed) or when the change in temperature exceeds the rate of rise of 110C/min) with base (Blinking LED type) made of ABS plastic and all accessories, suitable for operation on 24 v DC, internal protection class: IP23, dual pulsing LED with 3600 visibility, relative humidity: ≤95%;non-condensing and EN54 compliance of approved make etc. as required. (Make- Apollo / GST / Honeywell / System sensor)
Supply, installation, testing and commissioning of electronic hooter cum speaker made of 16/18SWG CRCA sheet duly powder coated with PO red colour, output not less than 80db @25mtr, LMT with adjustable sound output of 2.5 watt,5 watt, suitable knock out for cable entry from top suitable for operation on 100/70 volt RMS AC supply etc. as required. (Make- Apollo / Honeywell / GST/ system sensor/ Ravel /Agni)
SITC of manual push button station(pill box) Manual Call Point in MS Housing for Conventional Fire Alarm System with glass for breaking up in case of fire and hammer with chain etc. (Make- Apollo / Honeywell / GST/ system sensor/ Ravel /Agni)
Supply and laying of 2 core 1.5sqmm FRLS PVC insulated and PVC sheathed copper conductor armoured cable on surface/recess for looping the fire alarm devices & providing power supply to sounder cum strobes etc. as required. (ISI)
Supplying and making indoor end termination with brass compression gland and aluminium lugs for following size of PVC insulated and sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required. a) 2 core, 6 Sq. mm (19mm)
S/F ABS round box / MS Box on ceiling for fixing the detectors etc as reqd.
Supplying & Fixing of wall mounted Autoglow Signage Fire Exit Sign Board 3mm PVC Sheet with high Glow intensity in total Darkness. (Red and Green colour with exit symbols as per requirements)
Testing, checking & fault finding of Automatic Fire Detection, Fire Alarm system comprising of Fire control panels , Fire Detectors , Manual call points, Electronic Hooters etc. assessing the faults and material required for repairing and rectification of faults i/c rectification of minor faults, testing for proper functioning etc. complete as required.
Gr., 1st, 2nd, 3rd & 4th Floor and Telephone Exchange of Door Sanchar Bhawan
Refilling of following capacity CO2 type fire extinguishers with fresh /sufficient quantity / quality of CO2 with proper weight and measure, labeling with date of refilling and expiry date of refilling as per the ISI standards and as per the norms of Fire Authorities. Re-fixing the same in proper position and location as per the requirement of the location and type of fire extinguisher .
4.5 KG CO2 type Portable Fire Extinguisher
3.0 KG CO2 type Portable Fire Extinguisher
2.0 KG CO2 type Portable Fire Extinguisher
Hydraulic Pressure Testing of 4.5 capacity CO2 type Fire Extinguishers as per IS: 5844 -1970 (Reaffirmed 2006) and submission of Test certificates etc. as required.
Refilling of Dry chemical powder type 4/5 Kg capacity fire extinguisher (Powder + new CO2 gas cartridge/ gas as per BIS standard).
Providing and fixing of Gas Discharge Hose & Horn for following capacity Co2 type Fire Extinguishers.
For 4.5 KG CO2 type Portable Fire Extinguisher
3.0/2.0 KG CO2 type Portable Fire Extinguisher
Providing and fixing Gun metal regulating valve with safety washers for 4.5 Kg capacity Carbon Dioxide type Fire Extinguishers as per BIS specifications. {(IS: 3224:2002 (Reaffirmed 2007)} (The dismantled scrap material may be retained by the agency)
Providing and fixing Hose pipe/Nozzle for Dry Chemical Powder Type Fire Extinguisher of 5 Kg. Capacity
Providing and fixing MS clamp for fixing CO2 4.5 Kg capacity / DCP 5 Kg capacity fire extinguishers on wall etc. as required.
Supply and fixing of compact design line interactive UPS with load capacity of 360Watts / 600VA, output frequency (sync to mains) : 47 - 63 Hz , three numbers battery backed up and surge protected 6A, 2/3 pin output Indian power socket, automatic Voltage Regulator (AVR) with wide input Voltage range 145-290V, transfer time - 10 ms typical : 12 ms maximum, 1x7.2Ah battery provides 20 - 75 min. back-up time as per the load, Generator Compatible, cold start capability allows the load to power on just on battery; stays quiet during a changeover from mains to generator etc. complete as required. (Make- APC model BX600C-IN /Equivalent of reputed make)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .