Abadi sthit Abadi piknik Spot ke saudaryikaran ka karya

Excavation in foundation in soil mixed with moorum including lift up to 1.5 m and lead up to 30 m. And including filling, watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer incharge up to a distance of 30m. from the foundation trenches including all T&P phowarah and basket etc. complete. DSR SI no-2.6.1

Concrete with 4 cm. gauge approved stone ballast, approved coarse sand and cement in the proportion of 6:3:1 including supply of all materials labour and tools and plants etc. required for proper completion for the work as per DSR SINo.4.1.5

Providing and laying in position machine batched and machine mixed design mixM-25 grade cement concrete for reinforced cement concrete work, using cementcontent as per approved design mix, including pumping of concrete to site of layingbut excluding the cost of centering, shuttering, finishing and reinforcement,including admixtures in recommended proportions as per IS: 9103 to accelerate,retard setting of concrete, improve workability without impairing strength anddurability as per direction of Engineer-in-charge.(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ lesscement used as per design mix is payable/recoverable separately) CPWD Analysis of rate code 5.33.2

Mild steel or iron work in plain work such as reinforced concrete or reinforced brick work (when not included in over all rates ) wrought to required shape as necessary including bending , and also including supply of steel and wastages and overlapping and hookes required for proper completion of the work.

Brick work with common burnt clay (non modular) bricks of class -150 in superstructure above plinth level up to floor V level in all shapes and sizes in :: Cement mortar 1:4 (1 cement : 4 coarse sand) CPWD Analysis of rate code 6.4.1

Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately). Red sand stone - 30mm thick gang saw cut stone CPWD Analysis of rate code 8.20.1

Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer- in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid).CPWD Analysis of rate code 8.21

Providing and applying White based putty of average thickness 1 mm of approved brand and manufacture over the plasterred wall surfce to prepared the surface even the smooth complete as per CPWD Analysis of rate code 13.80

Finishing walls with Premium Acrylic Smooth exterior paint with Silicon additives of required shade New work (Two or more coats applied @ 1.43 Ltr/10sqm over and including base coat of water proofing cement paint applied @ 0.9 kg/ 10 sqm) as per Sl No 13.47.1

Providing and laying rectified glazed ceremic floor tiles 300x300 mm or more size (thickness to specified by approved make & colors) of first quality confirming to IS 15622 of approved make in colors & shade laid on 20 mm thick cement mortar 1:4 (Icement 4 coarse sand) including grouting the joints with white cement and matching pigments as per DSR si no 11.39