3rd Call NIT NO 13 KOLAR Year 2023-24

Amount

SUPPLY OF 30 KVA AIRCOOLED DG SET

SUPPLY OF 30 KVA AIRCOOLED DG SET KIRLOSKAR MAKE 30KVA DG SET Three Phase with Engine Model HA394TCI G2 40BHP AIRCOOLED Factory Assembled DG SET comprising of "KIRLSOKAR GREEN" Oil Engines make above model,Diesel Engine directely coupled to "KIRLOSKAR GREEN"make Alternator mounted on Common Base Frame COMPLETE with STD CONTROL PANEL,FUEL TANK,KIRLOSKAR BATTERY with LEADS,AVM Pads and ACOUSTIC ENCLOSURE(canopy) as per CPCB Norms and along with FIRST FILL of K-Oil & K-Cool DETAILS:- Monitoring Feature- Online detail of DG SET on MOBILE 1-Phase Voltage 2-Current 3-Frequency 4-Genset KVA,KW,KWH,KVAR 5-Power Factor 6-Temp 7-Lube Oil Pressure 8-Engine Temperature 9-RPM 10-Run Hours 11-No. of Starts 12-Fuel Level 13-Auto Manual Stop 14-Battery Charging Condition MAKE:-"KIRLOSKAR GREEN" AIR COOLED

AUTO MAINS FAILURE (AMF) PANEL SIMENS/L&T/SIMILAR MAKE AMF PANEL with PLC Power Distribution boards as per REQUIREMENT Suitable for Lighting Connections. Fabrication carried out in CR Sheet 14 SWG for load bearing Member and COMPLETE Sturdy Hinges and Locks Provided in PANELS REQUIREMENTS/FEATURES:- PHASE - THREE PHASE MATERIAL - STAINLESS STEEL IP RATING - IP 54 FREQUENCY - 50Hz VOLTAGE - 440V WITH ANY OTHER EXTRA REQUIREMENTS SUITABLE FOR 30KVA DG SET

SUPPLY OF TYRE SIZE=1000 X 20(NEW not remoulded) 1000-20(MAKE MRF / BRIDGESTONE/APOLLO)

SUPPLY OF TUBES TUBE SIZE=1000X20 (NEW) 1000-20(MAKE-MRF/BRIDGESTONE/APOLLO)

SUPPLY OF RIM DOUBLE PALLA TYPE= 1000-20 WELDING OF SIZE= 1000X20

SUPPLY OF WHEEL HUB WHEEL HUB OF REQUIRED / COMPATABLE SIZE (Manufactured With Standard Quality)

SUPPLY OF CATCHER HUB CATCHER HUB WITH NUT BOLTS (COMPLETE) Including Welding, Fitting, Adjusting

SUPPLY OF AXLE Axcel Of Required Standard Strength,Quality

SUPPLY/MAKING OF TOOL AND PUMP BOX Making/Supply Of Tool And Pump Box With Foundation Base Girder Of 12 x 514 Feet Long And 5 Feet Broad Of SS Size 4 x 4 With Locking Facilityeart

COLOURING OF TROLLEY Colouring OF Trolley After Scrapping/Scaling Members With Sand Paper Upto Required Finish With Applying Two Coats Of Anti Corrosion Primer On Members Surface And Painting Upto Required Shade

SUPPLYING/MAKING OF KAMANI JHULA Supply,Making Of Four Sets Kamani Jhula With Four ShockUps In Each Tyres With Proper Bouncing, Alignment And Adjustments

SUPPLY OF 30 KVA AIRCOOLED DG SET

FIXING OF KAMANI SET Fixing Of Kamani Set With Clamps (complete job)

SUPPLY OF KAMANI BUSH Providing And Fixing Of Kamani Bush GM With Main Pin And Grease Nipples

SUPPLY OF GM ROLLER Supply,Making,Fixing Of GM Roller Bearing Of Size-2.5 Feet

SUPPLY OF GENERATOR FOUNDATION Supplying And Fixing Of Generator Foundation Of Rubber Bush With SS sheets(Paata) And SS Nut Bolts (Kirloskar)