Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹17.6 LAccepted-AOC SHOP NO 3 COMMERCIAL AUTOMOBILES GURUDWARA ROAD SHASTRI WARD SAGAR MP 470002 | SAGAR | MADHYA PRADESH | 470002 | 1 | Accepted-AOC LOWEST BIDDER | |
| 2 | 2₹17.8 L+₹27,231.30 (1.55%)Rejected-Finance ANAND NAGAR ROAD NO 4 RAJAKHEDI MAKRONIA SAUGOR MP | SAUGOR | SAUGOR | MP | 2 | Rejected-Finance Not lowest bidder | |
| 3 | 3₹18.1 L+₹56,507.80 (3.22%)Rejected-Finance NEAR MPEB OFFICE DHANA DISTT SAUGOR MP 470228 | DHANA | SAUGOR | MP | 470228 | 3 | Rejected-Finance Not lowest bidder | |
| 4 | 4₹18.7 L+₹1.1 L (6.29%)Rejected-Finance | 4 | Rejected-Finance Not lowest bidder | |
| 5 | 5₹18.8 L+₹1.2 L (7.00%)Rejected-Finance WARD NO 36 CHAUBEY COLONY NARSINGHGARHPURWA CHHATARPUR MADHYA PRADESH 471001 | CHHATARPUR | MADHYA PRADESH | 471001 | 5 | Rejected-Finance Not lowest bidder |
Tender Value
₹23.1 L
EMD Value
₹46,100
Closing Date
23 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Manash Kumar Das AE Civil
AGE I DHANA PIN 470228, DIST SAGAR, MP
CONSTRUCTION OF TWO NEW SEPTIC TANK NEAR STUDENTS LIVING AND COOK HOUSE IN NCO ACADEMY.
2024_MES_644265_1
8300/DH/62/E8
Open Tender
Civil Works
Item Rate
180 days
AGE I Dhana
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Assistant Garrison Engineer (I) Dhana
₹46,100
Yes
5 Sept 2024
28 Feb 2024
25 Mar 2024
28 Feb 2024
23 Mar 2024
11 Mar 2024
Amount
M&L for Earth work in excavation over areas by mechanical means (Hydraulic excavator) (exceeding 30 cm, but not exceeding 1.5m in depth) including getting out and disposal of excavated earth (in any type of soil) lead upto 50 m and lift upto 1.5m, complete all as specified and as directed.
M&L for Earth work in excavation over areas by mechanical means (Hydraulic excavator) means over areas (exceeding 1.5 m but n exc 3.00 m in depth) including getting out and disposal of excavated earth (ordinary rock) lead upto 50 m and lift upto 1.5m, complete all as specified and as directed.
M&L for Earth work in excavation over areas by mechanical means (Hydraulic excavator) means over areas (exceeding 3.0 m but n exc 4.5 m in depth) including getting out and disposal of excavated earth (ordinary rock) lead upto 50 m and lift upto 1.5m, complete all as specified and as directed.
M&L for Earth work in excavation over areas by mechanical means (Hydraulic excavator) means over areas (exceeding 4.5 m but n exc 6.00 m in depth) including getting out and disposal of excavated earth (ordinary rock) lead upto 50 m and lift upto 1.5m, complete all as specified and as directed.
Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) in any type of soil, including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil, within a lead of 50 m, complete all as specified and as directed.
Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil, complete all as specified and as directed.
M&L for cement concrete in foundation, filling and mass concrete in M-7.5 (Nominal Mix) using 40 mm nominal size graded crushed stone aggregate, complete all as specified and as directed.
M&L for Brickwork with sub class ‘B’ bricks in one brick thick honeycomb walling, built in CM 1:6, complete all as specified and as directed.
M & L for brick work with sub class 'B' bricks, non-modular sizes as per IS 1077: 1992, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished flat concrete surfaces, complete all as specified and as directed.
Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for fair finished square, rectangular or polygonal concrete surfaces, complete all as specified and as directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished flat concrete surfaces, complete all as specified and as directed.
M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete, complete all as specified and as directed.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 100 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 100cm wide with fair finished flat concrete surfaces, complete all as specified and as directed.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide with fair finished flat concrete surfaces, complete all as specified and as directed.
M&L for TMT mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bendin' spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mmdia or securing with clips, complete all as specified and as directed.
M&L for TMT Mild steel bars 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.
M&L for RCC (Design mix) M-25 (Using 20mm graded crushed stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed.
M&L for RCC (Design mix) M-25 (Using 20mm graded crushed stone aggregate) as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses, complete all as specified and as directed.
M&L for RCC M-25 (Design mix) (Using 20mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed.
M&L for Providing reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.
M&L for Providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with ma sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling).corbels, brackets, etc. (of any section indicated), with plain fair faces, including cham fers, weatherings, throat- ing etc. and setting in cement mortar 1:4 complete with joints to match, complete all as specified and as directed.
M&L for Providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4, complete all as specified and as directed. (Note:-Reinforcement to be measured separately).
M&L for plastering 5 mm thick on fair faces of brick work or concrete surfaces on ceilings in cement mortar 1:3 finished even and smooth without using extra cement, complete all as specified and as directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished fair, even and smooth without using extra cement, complete all as specified and as directed.
Preparation of newly plastered surfaces on walls and applying three coats of white wash, complete all as specified and as directed.
S & F PVC-U, type B as per IS 13592: 2013 single socketed soil waste pipes in any length with rubber ring joints, 110 mm dia, fixed to walls complete all as specified and as directed by Engineer- in- charge.
S & F PVC-U bends without inspection door (any angle), 110 mm dia conforming to IS 14735: 1999, complete all as specified and as directed.
S&F PVC-U (SWR) junction single, (Single T) equal or unequal of bore size 110 mm, complete all as specified and as directed.
S & F PVC-U vent cowl, 110 mm dia conforming to IS 14735: 1999 complete all as specified and as directed by Engineer- in- charge.
S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed.
M&L for preparation of new or previously untreated steel surfaces of any description, n.exc 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) incl a coat of red oxide primer, complete all as specified and as directed.
S & F class SN 8 structured wall polyethylene piping system (pipe with online coupler and elastomeric rubber ring) with hollow annular profiled outer surface and a smooth inner surface (double wall corrugated) for non-pressure underground drainage and Sewerage application, Type B, Nominal Size (DN/ID) 150, made of polyethylene (PE) material conforming to per IS16098 (Part 2):2013 and to be transported, handled, installed and jointed as per Annex A of IS16098 (Part 2):2013, complete all as specified and as directed.
M&L for Concrete bed to drain pipes of nominal bore 150mm including packing under, and haunching against the sides of pipes after they are laid and tested; in Cement concrete 1:4:8 type D2 (using 40mm graded crushed stone aggregate), complete all as specified and as directed.
Cutting into existing manholes for connecting new drains, making good to pipe of internal dia 150mm and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete all as specified and as directed.
M&L for Loose filling with brick bats aggregates of gauge 80 to 150 mm in soakage pits, soakage wells, complete all as specified and as directed.
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and as directed.
Pandey Construction and Engrs
siddhant construction
M/S Sai supplier
m/s mahendra kumar khare contractor
Vee kay construction
M/S JAINENDRA KUMAR JAIN
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .