REPAIR TO CERTAIN BR NATURE WORK IN JCOS ORS MD ACCN OF SUBRAMANIAN LINE CMP LINE CAPT LINE AND OTM ACCN OF BUTCHERY AND OFFICER RATION STAND ORS IN THE AREA OF AGE BR II WEST UNDER GE WEST DELHI CANTT 10

Amount

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc including rubbish off the premises beyond MOD land complete all as specified and directed.

M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed.

All as per srl item No 2 above but except brick.

M&L Brick work with sub class 'B' brick staight or curved on plan to any radious in half brick thick wall built in CM 1:4 etc complete all as specificed and directed.

M&L for 15mm thick rendering on concrete surface/brick surface in cement mortar (1:4) surface finished even and fair mixed with liquid WPC as per manufacturer's instructions complete all as specified and directed. (Note : Rate of WPC included in quoted rate and nothing extra payble on this acount).

M&L rendering 15mm thick in cement mortar (1:6) finished even & fair on brick/concrete surfaces complete all specified and directed.

M&L 5mm thick rendering with ready mix mortar of approved make on ceiling surface finished even and smooth without using extra cement as whole or in patch including taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed, rubbish of the premises complete all as specified and directed. Make : SIKA / Dr Fixit / Ascolite or equivalent as approved by GE.

M&L for 15mm thick rendering of ready mix mortar of approved make on brick work or concrete surfaces on wall, finish the surface even and smooth without using extra cement as whole or in patch etc including taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed, rubbish of the premises complete all as specified and directed. Make : SIKA / Dr Fixit / Ascolite or equivalent as approved by GE.

M&L preparation of newly plastered surfaces of ceiling and applying two coats of white wash all as specified and directed.

M&L rendering 15mm thick in cement mortar (1:6) finished even & fair on brick/concrete surfaces including taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed, rubbish of the premises complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed.

M&L for 15mm thick rendering on concrete surface/brick surface in cement mortar (1:4) surface finished even and fair mixed with liquid WPC as per manufacturer's instructions including taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed, rubbish of the premises complete all as specified and directed. (Note : Rate of WPC included in quoted rate and nothing extra payble on this acount).

M&L preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of primer on external surfaces of walls complete all as specified and directed.

M&L preparetion of old decorated plastered surfaces of walls etc by complete removal of existing treatment including washing, rubbing down and stopping of surface and applying two coats of oil emulsion distemper on wall surfaces complete all as specified and dircted.

M&L for applying wall care putty not less than 1mm thick on wall / ceiling even and smooth surface complete all as specified and directed.

M&L for preparation of old plastered surface and applying a coat of oil bound distemper, complete all as specified and directed. .

M&L preparation of surfaces by complete removal of existing treatment & applying two coats of cement base paint on walls over a coat of primer all as specified & directed. Note : Colour / shade as approved by Engr in charge.

M&L Glazed ceramic coloured joint free tiles of size 450mmx300mm, 6 to 7mm thick on vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including 10mm thick backing coat in CM 1:4 and including dismantling floor, hearth or wall tiling including cement mortor bedding (including backing) removing of rubbish off the premishes of MOD land complete all as specified and directed.

M&L Non skid ceramic coloured joint free tiles 600mm x 600mm, 7 to 8mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15mm thick in cement mortar (1:6) and including dismantling floor, hearth or wall tiling including cement mortor bedding (including backing) removing of rubbish off the premishes of MOD land complete all as specified and directed.

All as per item 19 but size 400mm x 400mm, 6 to 7mm thick

All as per item 19 but size 300mm x 300mm, 6 to 7mm thick

Demolition of cement concrete (unreinforced) / sunken floor in ground floor and paving not exc. 15cm thickness (below or above ground level), removal of rubbish beyond MOD land complete all as specified and directed.

M&L for sunken treatment as following over it complete all as specified and as directed:- (a) Rendering 10 mm thiick in CM 1:4, (b) Two coats of tapecrete mixed (1:2) with cement slurry @ 3Kg/sqm per sqm or as per manufactures's instruction, surface finished even and smooth (c) Applying a coat of bitumen primer @ 0.70 kg /sqm, applying one coat of hot bitumen 85/25 gde @ 2.6 kg/sqm (d) Applying one layer of 0.5 mm thick fibre tissue/APP membrane

M&L for PCC 1:5:10 type E-2 (40 mm graded stone agg) as in sunken floors complete all as specified and directed.

S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern' size 580 x 440 mm white with integral foot rests (excluding flushing cistern), including flush pipe of polyethylene of low or high density, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete trap set in concrete and including CI 'P' trap & 100mm cast iron sanitary connection socket fit to WC out-let complete all as specified and directed.

Taking down door/window/ventilator frames with shutters not exc 1.50 sqm each (without taking off shutters from frame) complete all as specified and directed.

All as per item 26 but exc 1.50 sqm but not exc 4.00 sqm each.

Taking down shutters of any description not exceeding 1.00 Sqm each complete all as specified and directed.

All as per item 28 but exc 1.00 Sqm but not exc 2.00 Sqm each

S&F aluminium door single leaf with powder coated aluminium frame of section 62.5x37x1.5mm thick, shutter with bottom & middle rail of section 112.50x 37x1.5mm thick and styles & top rail of section 83x37x1.5mm thick with centrally locking arrangement with lock make of ‘GODREJ’ or ‘LINK’ & hydraulic door closer, 4.8 mm thick tinted glass with rebate including joining cleats, fixing of builders hardware fittings, necessary floor springs, glazing with 5mm thick frosted glass including necessary fittings, fixtures & aluminium snap beads, complete all as specified and directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) aluminium three track window, shutter (Size 45X15mm) i.e. two shutter with 4.8mm thick tinted glass and one with stainless steel wire cloth of 0.36mm dia and avg width of apperture 1.40mm and sliding section (confirming section Cat No 20814 from 'Jindal' ) complete window size (92.00X45.50mm) with frame (Chowkhat) size (101.60X44.45X1.90mm thick), including all necessary locking arrangements (touch lock of zinc alloyed powder coated as per sample) and fittings complete all as specified and directed.

M&L for powder coated aluminium ventilator, openable, top hung and bottom portion fixed type without sash bars with aluminium section of weight 0.55 kg/RM including glazing, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and top hung shutter fixed hook & eye minimum one no on each shutter, one no aluminium tower bolt 100mm long and 75mm long aluminium handle in each shutter etc. complete all as specified and directed. Note : glazing, wire mesh shall be measured and paid separately against respective items.

S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars complete all as specified conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, complete all as specified and adirected.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded etc. with suitable PVC sheet beading including hinges etc complete all as specified and directed.

M&L for framed work as in door/vent/CB chowkats of angle or other section, frame work for chajja with gusset plates, cooler stand, rails, braces etc complete drilled for fixing of steel sheeting or other covering and including cutting brick work for hold fast confirming to Fe 410-W (Gde-E-250) quality 'A' including necessary welding complete all as specified and directed.

S&F 35mm thick flush shutter solid core construction with block board core and plywood face panels, comercial type on both sides complete all as specified and directed.

S&F 35mm thick plain framed panelled shutters (any number of panels) with lock rails in IInd class HW and panels of 9mm thick BWP commercial ply or 12mm veneered parcticle board with commercial veneering on both faces, supplied and fitted to chowkat complete all as specified and directed.

S&F 35 mm thick glazed skelton shutter IInd class hard wood rebated and prepared to received glass, gauge etc (with sash bars) edges of forming plain,chamfered or rounded fitted with mitred beads for securing glass etc complete all as specified and directed.

S&F 18/19mm thick block boards, grade 2 quality, interior grade, commercial type, fixed to frame as in shutters to cup boards etc including 18/19 x 4mm leeping/ beading all round shutters complete all as specified and directed.

S&F 1.00 mm thick plain black mild steel sheeting in as in door shutter covering including, welding or soldered joint complete all as specified and directed.

S&F 3mm thick ordinary sheet glass and glazing with oil putty complete in squares not exc 0.50 Sqm each pane all as specified and as directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares nexc 0.5 sq. m in each pane including necessary stair arrangement and safety arrangement complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for preparation of new steel surfaces, painting two coats of synthetic enamel paints over a coat of red oxide primer exc 10mm width or girth complete all as specified and directed.

M&L for preparation of new wooden surfaces, painting two coats of synthetic enamel paints over a coat of pink primer exc 10mm width or girth complete all as specified and directed.

S&F 100 mm long stainless steel butt hinges medium weight fixed with stainless steel screws complete all as specified and directed.

S&F 100mm long butt hinges medium weight cold rolled MS to pressed steel/angle iron frames complete all as specified and directed.

S&F 75mm long butt hinges medium weight cold rolled MS to pressed steel/angle iron frames complete all as specified and directed.

S&F 150mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 125mm long aluminium handles cast type anodised ISI Marked complete all as specified and directed.

S&F 250mm long MS sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F hasp and staple size 75mm safety type, aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 200mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete including necessary welding if required complete all as specified and directed.

Disconnecting exsiting water storage tanks of capacity exc 250ltr and n exc 500 ltr, removal of unusable tank from site complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. with necessary chemical / bleaching powder, capacity upto 500 ltrs including refixing and fixed in position complete all as specified and directed.

S&F 500 ltrs capacity rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position and including 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & 20mm dia tank nipple suitable for HDPE water tank, complete all as specified and directed.

Taking up or down 15mm bore of galvanised iron steel tubing and connections including cleaning for refixing, cutting/chasing in wall/floor and making good in CM 1:3, to match existing complete in all respect as specified

S&F 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified.

Fixing only tubes 15mm bore any grade to walls and ceiling or laying in floors

Taking up or down 20mm bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting/chasing in wall/floor and making good in CM 1:3, to match existing complete in all respect as specified

S&F 20mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified.

Fixing only tubes 20mm any grade to walls and ceiling or laying in floors

M&L for framed work as in door/vent/CB chowkats of angle or other section, frame work for chajja with gusset plates, cooler stand, rails, braces etc complete drilled for fixing of steel sheeting or other covering and including cutting brick work for hold fast confirming to Fe 410-W (Gde-E-250) quality 'A' including necessary welding and including wrought iron or mild steel work of any description not otherwise provided for concerete all as specified and directed.

Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concrete all as specified and directed.

M&L for reinforced cement concrete using type B-1, 1:2:4 (20mm graded stone aggregate) for slabs supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like and including demolition of reinforced cement concrete as in chajja, kitchen slab, chullah hood, chimney portion, manhole cover and similar work n.exc 15cm thick and removal of rubbish beyond MOD land complete all as specified and directed. (Note :- Steel reinforcement bars shall be measured and paid separately under relevant items)

S&F for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L 16-18mm thick black granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including screed bed of 20mm thick in CM (1:4) including rubbing and polishing complete all as specified and directed.

M&L 16-18mm Udaipur Green marble stone slab machine cut, bedded jointed and pointed with white cement mixed with pigment to match the shade of stone including cutting, rubbing and polishing surface and rounding off edges match laid over and including 20mm thick screed bed in cement mortar 1:6 and including demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar and removal of rubbish beyond MOD land complete all as specified and directed.

M&L kota stone slab 18-20 mm thick as a one piece area not exc 1.00 sqm in tread and riser of steps, skirting, dado and pillers laid over 20mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shed of the slab including rubbing and polishing and including demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar and removal of rubbish beyond MOD land complete all as specified and directed.

M&L preparation old plastered surfaces of ceiling and applying one coats of white wash all as specified and directed.

M&L painting one coat of synthetic enamel paints on old wooden surfaces of girth exc 10cm, including preparation of surfaces. complete all as specified and directed.

M&L preparation of old steel and iron surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in repairs 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever including connecting to WC and fixing on walls with rawl plug, screws and including PVC Connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. complete all as specified and directed.

S&F in repair bib taps standard of PTMT any colour high pressure screwed for iron pipe 15mm bore dia (Minimum wt. 90 gm). complete all as specified and directed.

S&F in repairs 20mm bore dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in bed blocks for hold fast and coping bedding rounded or chamfered on edges including necessary form work complete all as specified and directed.

S&F with 3mm thick ordinary sheet glass fixed with clips and putty complete in squares not exc 0.50 sqm each pane including hacking out old broken glass of any thickness/size of any description from wood/steel frame fixed with clips and putty, complete all as specified and directed.

S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs stainless steel sink of thickness of sheet not less than 0.8mm for kitchen or loboaratory with plug, washer and wastes, including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size of bowl size 495mmX420mm bowl size 410mmX330mmX160mm complete all as specified and directed.

S&F in repairs stainless steel plate rack made of thickness of sheet not less than 0.80mm of size 600x750x250mm fixed to wall with suitable rawl plug complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 550X400mm excluding excluding taps, waste, chain and plug and porcelain stopper but including brackets and PVC Connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 15mm bore dia Pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shank and fly-nuts screwed for iron pipes and fixed all as directed.

S&F in repair 15mm bore dia stop valves cast copper alloys, screwed down high pressure but fancy type chromium plated (Angle valve) with crutch, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15mm bore dia bib taps chromium plated fancy type cast copper alloy with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule & fixed for 15mm bore GI pipe complete all as specified and directed.

S&F 32mm dia CP waste coupling and 32mm dia flexible waste pipe 1.20 m long suitable for wash hand basin and sink complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour as approved having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and including cutting chasing of wall and including dismantling of plain or corrugated steel sheeting, any gauge, thickness, incl Nainital or similar patter roof coverage /wall cladding complete all as specified and directed.

S&F in repairs 75mm bore cast iron floor trap, nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repair cover suitable for 500ltr capacity water storage tank complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length including mild steel stack clamps (as per sample) fixed in cement concrete 1:2:4 blocks with rubber ring joints fixed to walls and including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc removal rubbish beyond MOD land complete all as specified and directed.

All as per item 93 but 110mm bore

S&F 75mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.

All as per item 95 but 110mm bore

M&L 75mm thick PCC (1:3:6) type C2 (using 20mm stone aggregate) as in floors/pavings /plinth protection etc, finished even and fair with using extra cement grooves filled with bitumen mastic filling of mix (1:2) (bitumen and sand) complete all as specified and directed.

S&F in repair 28mm dia MS drapery curtain rod with coloured PVC coated including bracket, holder etc all necessary fittings as per site requirement complete all as specified and directed.

S&F 75mm bore cast iron soil waste and vent pipe in any length with or without ears with cement joints fixed to walls/ceiling or laid in vertical surfaces and including dismantling of cast iron drain pipes including fittings, jointed in cmenet mortor internal dia of pipe 75mm complete all as specified and directed.

All as per item 99 but 100mm bore

S&F 100mm bore cast iron branch piece single (equal or unequal) ordinary or inverted (spigot or socket type) or with paralled branches complete all as specified and directed.

S&F 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

All as per item 102 but 100mm bore

Deduct Credit: for demolished/dismantled material of (-) Rs 76529.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum.

Chandramauli Engineers Pvt. Ltd.

Vipul Construction

M/S CHANDER MUNI

S GOURAV PRAKASH ENTERPRISES

M/S Yamin

M/s M M BAHL

B. S BUILDERS