REPAIR TO FACIA PLASTER, CHAJJA, WINDOW,DOOR AND OTHER MISC WORKS IN WNC (O) MESS UNDER CELL NO. 1 ,CERTAIN MAINT OF BLDG FOR STEEL YARD,ROBERT COMPLEX,VISHWAKARMA AND CERTAIN BLDG AT NOFRA UNDER CELL NO.2 AND REPAIR TO PATH WAY, PARKING AREA AND HA

Amount

Taking down cement plaster on brick on stone walls etc including raking out joint, hacking for key, scrubbing down with water etc complete all as specified.

Material & labour rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (with out using extra cement) including Sagol finish complete all as specified.

Material & labour for rendering 5mm thick in CM 1:3 on ceiling surface complete all as specified and as directed

Material & labour for rendering 20 mm thick on fair faces of brick/concrete surfaces with two coats i.e (15 mm thick backing coat in CM (1:6) and 5mm thick finishing coat in CM (1:4)) , finished even and smooth without using extra cement (WPC to be measured and paid separately) complete all as specfified and directed.

Supply only integral water proofing compound

Material & labour for preparing new plastered surfaces of walls etc and applying three coats of white wash complete all as specified.

Material & labour for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening with primer on plastered surfaces complete all as specified and directed.

Material & labour for new or previously untreated surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof complete all as specified and directed

Material & labour preparation of new plastered surface of ceiling and applying three coat of white wash on ceiling complete all as specified and directed.

Material & labour for two coats Dr Fixit 601 or technocommercial equivalent make given on Appx B, Raincoat Dark Base Acrylic Waterproof Coating paint on external surfaces of walls (2kg/sqm)to fill the cracks with and including one backing coat epoxy base resin and hardner in proportion(1.5kg/sqm) as per manufacturers instructions complete all as specified and as directed

Chipping removing carefullly concrete work by low impact hammer ,breakar without damaging the structure & cleaning and disposal of debries out side the premises etc. complete as directed by Engr-in-Charge. Hard concrete should not be removed by force.

Material & labour for Clean existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc. complete and applying two coats of alkaline rust converting primer FEOVERT of Krishna Conchem or Roff rust cleaner of Piddilite or Dr. Fixit Rust removal or ShaliRust of STP Ltd or technocommercial equivalent make given on Appx B, on the rebars, including cleaning the reinforcement, wire brushing to remove loose rust spalls, wash the rebars with clean water within 3 min and wipe it dry.

Material & labour for applying two coats of Epoxy based Zinc primer in a span of four hours over the treated rebars and allow to dry for six hours. The application shall be by brush. Epoxy primer for steel of make / brand - Corroseal-ZR of Krishna Conchem or Dr. Fixit Epoxy zinc primer or technocommercial equivalent make given on Appx B,

Material & labour for cleaning all loose laitance on the concrete substrate and applying one coat of epoxy bonding agent on exposed concrete surface to ensure bond between old concrete & new concrete by brush application. Make / brand Monobond SBR of Krishna Conchem or Dr. Fixit epoxy bonding agent or Shalicrete URP of STP Ltd. or technocommercial equivalent make given on Appx B,

Material & labour for rendering minimum 20mm thick polymer modified mortar in cemet mortar (1:3) with graded quartz sand with additive Monolith - PMM of Krishnaconchem or polymer mortar HB of Dr. Fixit or Shalifix RM SG 01 of STP Ltd. or technocommercial equivalent make given on Appx B, 15% by weight of cement in one coat with and including curing as per manufacturer's instruction complete all as specified and as directed

Material & labour for Providing and applying water tight jacketing around columns with M20 grade micro concrete including all lifts, shuttering, drilling holes and fixing shear anchor as per specification complete. Make or brand Micro concrete of Dr. Fixit, Shalicrete URP of STP Ltd. , Epibond-21-LP, EPCO -KP-HP-250 of Krishna Conchem or technocommercial equivalent make given on Appx B. Note: Reinforcement shall be measured and paid separately.

Material & labour for applying concrete protection coating on finished structural members exposed to atmosphere make or brand IPNET of Krishna Conchem or New Coat from Dr. Fixit or technocommercial equivalent make given on Appx B, complete all as specified and directed.

Material & labour for Drilling and fixing Rohibb Teflon nozzles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep holes. Works shall be carried out as under :- (i) Cleaning of holes. Clean the holes by air blower prior to fixing nozzles. (ii) Fixing of nozzles. Insert 12mm dia. Rohibb Teflon nozzles in cleaned holes. External end of nozzles to be machine to receive outlet of grouting gun.Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for min.12 hrs. (iii) Cutting of nozzles. Cut the nozzles by chisel after completion of grouting without damaging structural elements. (iv) In case crack upto 2mm wide, fix the injection nozzels directly over the cracks, at intervals of 6 to 9 inches, using a drilling machine. Fix PVC/MS nozzels in these holes with fast-setting epoxy putty & let it dry for 2 to 3 days. Also, seal the crack between the ports with epoxy putty. (v) In case where the crack is wider than 2mm upto 4 to 5mm, drill holes at the sides of the crack in a staggered fashion, at intervals of 6 inches and affix them with epoxy putty as mentioned above. (vi) Also seal the face of the carck with a liberal application of the epoxy putty.

Material & labour for Injecting of site mixed cement slurry grout, mixed in specified proportion containing cement, sand water with addition of plasticizers (approved make) & migratory corrosion inhibitors, water cement ratio shall be varied between 0.5 to 1.0 for each hole, shrinkage compensating cement slurry mixed to a lump free fresh creamy consistency ,Mixing shall be done by mechanical mixer continuously stirring mechanically to keep cement particles in suspension. Injection of approved/ specified grout by means of pump at a pressure of 3-5 Kg/cm2 etc complete till the grout mix flows out from the nozzle indicating complete filling of grout in the holes drilled. Make / brand of Epoxy grout - Dr. Fixit Epoxy injection or EPCO KP-HP-250 of M/s Krishna Conchem or Shaligrout EI of STP Ltd. or technocommercial equivalent make given on Appx B.

Material & labour for Injecting low viscosity (3-5cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories till nozzles refuses to accept the grout, Including,Mixing of materialas:Mixing of material components(part a&b) in the required quantities as per manufacturer's instruction by weigh batching.Grouting:Fill the grouting gun with concrete penetrating corrosion inhibitor EPCO-KP-100/Protectsil CIT or Ferogard 903 or technocommercial equivalent make given on Appx B, Maintain desired pressure in the gun by air compressor; maintain the pressureat exit (2 to 3kg/cm2) by monitoring pressure guage at exit.Grout the material through prefixed nozzles in the structural elements@ 100ml per nozzle. Repeat the process for all the nozzles.

Providing and fixing additional main steel bar or stirrupsof designed diameter in various structural elements like column ,beams,roof and foundations including drilling and fixing hooks ,bending and fixing the bars with J hooks/screw etc. complete (Steel provided on the basis of 1% of volume of concrete).

Taking down chowkats or frames exc 1.5sqm but n.exc 4 sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed

-ditto- as per Item No. 22 above but n.exc 1.5 sqm complete all as specified and as directed

Taking down shutters of any description exc 1 Sqm but nexc 2 sqm complete all as specified and directed.

-ditto- as per Item No. 24 above but exc 2 sqm complete all as specified and as directed

Supply & Fixing aluminium window/door/partation, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame & necessary jointing cleats, glazing clips, powder coated aluminium snap beading, screws etc; complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, hooks & eyes, peg stays and handles including connected items, with and including, making good to the disturbed portion with its original specifications, complete all as specified and directed. Minimum thickness of powder coating shall be 25 microns

Taking down aluminium doors shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixng the handles & mortice looks in existing postiion with and includig new screws including refixing the door shutters in same opening complete all as specified and directed. Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items.

Taking down aluminium windows shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium cleats of existing make and also refixng the locks & roller in existing postiion with and includig new screws including refixing the window shutters in same opening complete all as specified and directed. Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items.

Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed.

Supply & Fixing any colour marble 18mm-20 mm thick machine cut, jointing and pointing with white cement slurry including cutting and polishing and including 20mm thick screed bed or bedding layer of mortar in CM 1:6 complete all as specified and directed.

Supply & Fixing concealed star lock powder coated for aluminium window fixed as per manufacturers instructions all as specified and directed.

Hacking out old broken glass ( any thickness, size, quality or description ) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Material & labour 3 mm thick plain glass sheets ordinary quality in squares n.exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

Material & labour 4 mm thick plain glass sheets ordinary quality in squares exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

Supply & Fixing rubber beading suitable for fixing 4mm / 5mm thick glass in aluminium windows/doors etc all as specified and directed.

Supply & Fixing in repairs aluminium anodized grill of design DG 104 pattern made out of 10mm dia rod fixed with and including standard aluminium frame of F section of size 23.40mmx15.30mm &1.4mm thick all as per manufactures instructions complete all specified & directed.

Supply & Fixing 75mm size 6 lever brass body concealed lock with duplicate keys, fixed in aluminium doors as per manufacturers instruction all as specified and directed.

Supply & Fixing aluminium door with fame and shutter, made out of powder coated extruded aluminium sections fixed with or without ventilator on top with and including powder coated aluminium butt hinges, tower bolt, glazing clips & locking arrangement, snap beading & handles, rubber beading & connected items with & including making good to the disturbed portion with its original specifications complete all as specified and directed. Minimum thickness of powder coating shall be 25 microns

Supply & Fixing extruded aluminium alloy handles fabricated type anodized 150 mm size complete all as specified and directed.

Supply & Fixing in repairs extruded aluminium alloy handles fabricated type anodized 150 mm size complete all as specified and directed.

Supply & Fixing aluminium (extruded section) body door closer hydraulically regulated, designation No.2, universal type, suitable for door shutter of 701 to 850 mm in width & of weight between 36 to 60 kg & fixed in repairs complete all as specified and directed.

Supply & Fixing 35mm thick second class hard wood, plain framed, paneled shutter (Two panel) of 9mm BWP comercial ply or 12mm veneered particle board with comercial veneering on both faces the size of rail land stile as per IS 1003 (Part-I) killn seasoned and chemically pressure treated .

Supply & Fixing IInd class hard wood plain solid, straight, chowkats and frames wrought framed rebated on the solid , rounded or chamfered put together with glue pinned at joints.

Supply & Fixing mild steel flat iron 25 x 3 mm such as in hold fast etc or similar small articles conforming to Fe- 410-0 or 310-0 complete all as specified and directed.

Material & labour mild steel Butt hinges medium weight, cold rolled and fixed 100 mm long complete all as specified and directed.

Supply & Fixing 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.

Supply & Fixing 200mm long aluminium anodized barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed.

Supply & Fixing 150 mm long aluminium anodized barrel tower bolts of extruded sections as dcomplete all as specified and directed.

Supply & Fixing 150 mm long aluminium anodized barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed.

Supply & Fixing 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

Supply & Fixing 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed in repairs complete all as specified and directed.

Supply & Fixing in repairs 250 mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

Material & labour for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Supply & Fixing in repairs for 140mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed

Material & labour prelaminated 12mm thick particle board exterior grade prelaminated both sides with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and directed

Supply & Fixing solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet complete all as specified.

Supply & Fixing factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C" channel having a PVC sheet strip of 20mm width stuck in side with salvent cemet for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement suppling and fixing in the frame at site all as specified and directed.

Supply & Fixing 2nd class hard wood 35 mm thick Glazed and skelton shutter open rebated and prepare to receive glass, gauze etc. (without sash bars) edges of framing plain, chamfered or rounded fitted with and cut and mitered beads, for securing glass sizes of members of shutters as specified in SSR Part I Sec 8 Clause 8.24(a) supply and fitted to chowkats complete all as specified and directed.

Supply & Fixing aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples complete all as specified and as directed

Supply & Fixing aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples as fixed in repairs complete all as specified and as directed

Dismantling floor hearth or wall tiling including cement mortat bedding but not backing), removing dismanteled materials such as serviceable/unservicesble tiles,etc. out side MD land and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge. .

Material & Labour for light/ dark shade coloured vitrified tiles of size 600mmX600mm and 8-9 mm thick (square/rectangular) polished in floors etc. at horizental surface set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed by the Engineer-in-charge.

Material & labour for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm upto any floor height over & including 15mm thick Screed bed or bedding layer in CM 1:3 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match at horizental surface complete all as specified and as directed by the Engineer-in-Charge

Material & Labour for light shade coloured vitrified tiles of size 600mmX600mm and 8-9mm thick (square/rectangular) polished in floors etc. at vertical surfaces surface set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed by the Engineer-in-charge.

Material & labour for Glazed ceramic tiles in vertical surfaces upto any vertical height of size 450x350x7mm thick including over 10mm thick Screed bed or bedding layer in CM 1:4 for laying tile finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and as directed by the Engineer-in-Charge

Demolition of stone slabs and tiles of any description or thickness in floors, approns etc, laid, bedded and pointed in any mortar and removing dimolished materials such as serviceable/unservicesble stone slab and tiles,etc. to store or out side MD accomodation land and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge.

Material & labour 18 to 20mm Hard wear stone (of any type) granite stone slab 20mm thick machine cut, bedded and jointed horizental/vertical such as in steps, jambs, pillars, win dow-cills, cooking plat forms and lik with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M40 grade conforming to IS 15658-2006 made by block making machine with strong vibratory compaction, of approved size, design & shape, cast in, of approved colour, laid in required colour and pattern over and including 30 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Material & labour for 18-20mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified.

Demolition of cement concrete in ground floor and paving of any thickness thick below or above ground level un re-inforced complete all as specified and directed. .

Material & labour for PCC of type D2, 1:2:4 using (20mm graded stone aggregate) 100mm thick as in sub base /hard standing etc. complete all as specified and directed.

Taking down eaves gutters and rainwater pipes( any size or pattern) , including all fittings, heads, shoes, bends , swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories) complete upto any floor height including MS scafolding all as specified and directed..

Supply & fixing 160mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in wall of approved shape and size approved by GE at any height, any location, with dash through fasteners and rain water bracket suitable for 160mm pipes spacing 1.5 c/c as per CE Navy Mumbai TD/2023/01 including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge

Supply & fixing 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in wall of approved shape and size approved by GE at any height, any location, with dash through fasteners and rain water bracket suitable for 160mm pipes spacing 1.5 c/c as per CE Navy Mumbai TD/2023/01 including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge

Supply & Fixing for PVC (SWR) bends any radius 160mm bore complete upto any floor height including MS scafolding all as specified and directed.

Supply & Fixing for PVC (SWR) bends any radius 110mm bore complete all as specified and directed.

Dismantling of wall,wall panneling,partation and ceiling boards (fibre, pulp, insulation) or insulation boards, bonded wool, blanket slab incl aluminium grid frame work complete all as specified and as directed

Supply & Fixing false ceiling with powder coated exposed GI grid suspension system a grid of 600mmX600mm. Grid of modular size 600mmX600mm shall be supported by 4 mm dia G.I. wire from purlins/soffit with and including 4 mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm complete all as specified and as directed

Material & labour for POP false ceiling using 600X900x12 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50x25 mm spaced at 750 mm centre, secondary joist of size 75X20 mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2 M C/C, including dismantling old un serviceable flase ceiling, complete all as specified and directed.

Supply & Fixing fixed in repairs Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including bottle trap complete all as specified and directed.

Supply & Fixing pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs 15 mm bore of pipe complete all as specified and directed.

Supply & Fixing vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding as fixed in repairs complete all as specified and directed.

Supply & Fixing vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing blts, flushing cistern and flush pipe) fixed as in repairs complete all as specified and directed.

Supply & Fixing in repair for seat cover for pedestal pan with plastic water closet seat , black or white, closed pattern with flat bottom and cover amnd mild steel chromium plated or aluminised hinging device complete upto any floor height all as specified and directed.

Supply & Fixing in repairs for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuidng brackets complete all as specified and directed.

Supply & Fixing brass CP towel rail, 20mm dia, D type , 60 cm long between flanges fixed in repairs complete all as specified.

Supply & Fixing health faucet with jet spray, 1.5 metre long, cast copper alloy, nickel chromium plated finish, 15 mm bore, 100 mm long with 1.5 metre long stainless steel shower hose and mounting device attached to wall complete all as specified and as directed by Engineer-in-Charge.

Supply & Fixing in repairs for providing 15 mm dia PVC connection of length 450mm long complete all as specified and directed.

Taking up and down 15 mm bore GI tubing and connection including cleaning for re-fixing or removing to store complete including MS scafolding all as specified and directed.

_Ditto_ all as per Sl item No. 90.00 here in before but 20 mm bore complete all as specified and directed.

_Ditto_ all as per Sl item No. 90.00 here in before but 25 mm or 32 mm bore complete all as specified and directed.

Supply & Fixing tubes medium grade GI with all fitting and fixed complete to walls and ceiling or laid in floors 15 mm bore of pipe complete including concieal the pipe all as specified and directed.

_Ditto_ all as per Sl item No. 93.00 here in before but 20 mm bore of pipe all as specified and directed.

_Ditto_ all as per Sl item No. 93.00 here in before but 25 mm bore of pipe all as specified and directed.

Demolition of brick work/stone masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles including coping complete all as specified and directed.

Material & labour brick work with sub class 'B' bricks old size, straight or curved on plan exc 6m mean radius in cement mortar 1:4 complete including MS scafolding all as specified.

Supply & Fixing Vitreous china water closet, couple closet, of size 795X360X640mm complete with and including all accessories, fixed in repairs all as specified and directed. (Make -Jaquar Cat No ARS-WHT-0313 or technocommercial equivalent make given in Appx B).

Supply & Fixing Vitreous china wash basin, of size 175X560X450mm complete with and including all accessories, fixed in repairs all as specified and directed. (Make -Jaquar Cat No CNS-WHT-WB03 or technocommercial equivalent make given in Appx B).

Supply & Fixing vitreous china urinals,half stall type, flat back, white, with grating and union for discharge pipe, complete all as specified and directed. (make -Jaquar Cat or technocommercial equivalent make given in Appx B)

Supply & Fixing towel rail 600mm long upto any floor height fixed in repair all as specified and directed. (make -Jaquar Cat No AQN-7711 or technocommercial equivalent make given in Appx B)

Supply & Fixing Toilet roll holder fixed in repairs all as specified and directed. (Make -Jaquar Cat No AKB-35753 or technocommercial equivalent make given in Appx B)

Supply & Fixing towel ring round fixed in repairs all as specified and directed (Make -Jaquar Cat No AQN-7721 or technocommercial equivalent make given in Appx B)

Supply & Fixing soap dish fixed in repairs all as specified and directed (make -Jaquar Cat No AQN-7731 or technocommercial equivalent make given in Appx B)

Supply & Fixing Hand shower (health Faucet) with 1M long flexible tube with wall hook Chrome Plated (Make -Jaquar Cat No. ALD-CHR-593 & SHA-571 or technocommercial equivalent make given in Appx B)

Supply & Fixing two way bib cock with wall flange fixed in repairs all as specified and directed (Make -Jaquar Cat No ORM-10041 or technocommercial equivalent make given in Appx B)

Supply & Fixing angular stop cock fixed in repairs upto any floor height all as specified and directed (Make -Jaquar Cat No ORM-10053 or technocommercial equivalent make given in Appx B)

Supply & Fixing Braided hoses 450mm long fixed in repairs all as specified and directed (Make -Jaquar Cat No ALD-803B or technocommercial equivalent make given in Appx B)

Supply & Fixing pillar cock Chrome Plated fixed in repairs all as specified and directed (Make -Jaquar Cat No ORM-10001 or technocommercial equivalent make given in Appx B)

Supply & Fixing bib cock fixed in repairs all as specified and directed (Make -Jaquar Cat No ORM-10037 or technocommercial equivalent make given in Appx B)

Supply & Fixing glass shelf fixed in repairs all as specified and directed (Make- Jaquar Cat No. CAN-1171N or technocommercial equivalent make given in Appx B)

Supply and fix in repair 270 ltr white rectangular PVC water storage tanks (Loft tank) of capacity following sizes with complete fitting including fixing 03 Nos tank nipples of GI/CPVC with washer for out let and inlet all as per manufacturers instructions including disconnecting service connections/over flow pipes and removing old tank complete complete all as specified and directed.

Supply and fix in repair 270 ltr PVC profile sheet suitable for PVC Loft tank of capacity following sizes including fixing aluminium/ PVC channel around the profile incl removing of tank and refixing the same complete upto any floor height complete all as specified and directed.

Supplying and fixing in repairs 15 mm bore brass float valve, high pressure with polythene float & fly nut complete, screwed for GI/CPVC pipe of following sizes including necessary GI/CPVC fittings upto any floor height complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise specified all as specified and directed.

Supply & Fixing MS sections as in ismc,angle, main and cross beams, hip and jack rafters; purlins,rolled section where connected to common rafters and running rails and guides for truss/colume/ staircase/ladder/anchor bolte for colums/base plates/gussate pltes, wind tie,door,gate,window etc including cutting welding etc; fixed with angle cleats or other connecting plates complete upto any floor height including MS scafolding all as specified and directed.

Supply & Fixing in repair upto any floor height 32mm dia PVC waste pipe for WHB and urinals fixed in repairs complete all as specified and directed.

Material & labour prepration of old plastered / decorated surfaces of walls/ceiling and applying two coat of oil bound distemper on plastered/decorated wall surfaces complete all as specified and directed.

Material & labour for preparation of old painted surfaces of wood or wood based surfaces over 10 cms width or girth and applying two coat of synthetic enamel paint on wooden surfaces complete all as specified and directed.

Material & labour for preparation of old painted surfaces of steel any description over 10 cms width or girth and applying two coat of synthetic enamel paint on steel surfaces complete all as specified and directed.

Material & labour for preparing new or previously untreated steel surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Supply & Fixing aluminium window with frame (minimum weight of tube section 2.1kg/m,two track1.41kg/m, three track 1.671 kg/m and shutter 0.5 kg/m ) , upto any floor height including MS scafolding made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame & necessary jointing cleats, glazing clips, powder coated aluminium snap beading, screws etc; complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, hooks & eyes, peg stays and handles including connected items, with and including, making good to the disturbed portion with its original specifications,and seal the window with silicon sealant complete all as specified and directed.

Supply & Fixing aluminium door with fame (minimum waight 2.1kg/m) and shutter(minimum waight of partition section 1.6kg/m) , upto any floor height including MS scafolding made out of powder coated extruded aluminium sections fixed with or without ventilator on top with and including powder coated aluminium butt hinges, tower bolt, glazing clips & locking arrangement, snap beading & handles, rubber beading & connected items with & including making good to the disturbed portion with its original specifications complete all as specified and directed. Note: for Srl item No. 122&123 :- Minimum thickness of powder coating shall be 15 micron for windows and 25 microns for doors.

Supply & Fixing 75 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 all as specified and directed.

Supply & Fixing 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 all as specified and directed.

Supply and fix 100mm size brass handle cast type polished bright upto any floor height all as specified and directed.

Supply and fix 150mm size brass handle cast type polished bright all as specified and directed.

Supply & Fixing for 125mm size double action spring hinges, mild steel wire spring, stove enamelled black as fixed in repairs complete upto any floor height all as specified and directed.

Supply & Fixing 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed upto any floor height all as specified and directed.

Supply & Fixing in repair 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed all as specified and directed.

Supply & Fixing 200mm long brass barrel tower bolts of extruded sections complete all as specified and directed all as specified and directed.

Supply & Fixing 200mm long brass barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed.

Supply & Fixing 150 mm long brass barrel tower bolts of extruded sections as fixed complete all as specified and directed.

Supply & Fixing 150 mm long brass barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed.

Supply & Fixing Aluminium locking bolts, anodized, with bolt not less than 10mm dia, 250mm size complete all as specified and directed.

Material & labour IInd class hardwood plain, fillets, wrought, square, rectangular or triangular in section exc 13 & n.exc 25 sqcm secured with nails or brads of size as fixed in repairs complete all as specified and directed.

Material & Labour for complete removal of existing treatment by washing down and smoothing old surface of walls including scrapping and applying two coats of oil bound distemper over a coat of primer over layer of smooth POP/Putty finish as required pruning 3mm thick strictly as per manufacture instruction with smooth roller finish ,complete all as specified and directed. (Note: after painting ,cleaning of all floors,glasSupply & Fixingurniture by own arrangement).

Material & Labour for complete removal of existing treatment by washing down and smoothing old surface of ceiling including scrapping and applying two coats of oil bound distemper over a coat of primer over layer of smooth POP/Putty finish as required pruning 3mm thick strictly as per manufacture instruction with smooth roller finish ,complete all as specified and directed. (Note: after painting ,cleaning of all floors,glasSupply & Fixingurniture by own arrangement).

Material & labour for complete removal of existing treatment by washing down and smoothing old surface of walls applying two coats of exterior acrylic emulsion (weather proof treatment) over one coat of primer, complete all as specified and as directed ( The tint and shade be as approved by the GE) The treatment shall be carried out by the authorised applicator of the firm and at any height including necessary scaffolding etc complete all as specified and as directed by the Engineer-in-Charge.

Material & labour desilting and cleaning the septic tanks/manholes/sump/open drain of any size/shape/depth by removing liquid, waste, night soil, sludge mechanically or manually with all necessary precaution as per rule in vouge as directed including depositing the sludge by excavation with depth not less than 30cms with necessary arrangement to avoid adours such as refilling excavated earth on eposited sludge and removing surplus soil to a distance out side MDarea and deposited where directed complete all as specified. Note :- For purpose of measurement and payment internal size of the tank upto liquid depth only shall be considered. Note :- For purpose of measurement and payment EACH TIME of the cleaning of chockup shall be considered. Note :- If required contractor shall arrange non summersiable sewage pump for cleaning sludge in sewage sump.

Cleaning to sewage pipe (SWG) systematically as directed by passing rope knots, bamboos etc of required size and shape and removing waste/sludge and depositing sludge as mentioned in item No. 1 hereinbefore for the drain pipes of the any sizes all as specified and directed. Note :- For purpose of measurement and payment EACH TIME of the cleaning of chockup shall be considered.

Cleaning to toilets, bathrooms chockup systematically as directed by passing rope knots, bamboos etc of required size and shape and removing waste/sludge and depositing sludge as mentioned in item No. 1 hereinbefore for the drain pipes of the following sizes upto any floor height all as specified and directed. Note :- For purpose of measurement and payment EACH TIME of the cleaning of chockup shall be considered.

Taking down cast iron pipes of any size or pattern at any position including all fittings such as bends, heads (measured overall as fixed along the centre line over fiitings and accessories) including rtemoving vegetation groewth around pipes as required, making good to surface to match with eixisting including necessary scaffolding etc complete all as specified and directed.

Material & labour for 150mm dia cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to walls all as specified and directed.

Material & labour for 100mm dia cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to walls upto any floor height including MS scafolding all as specified and directed.

Material & labour 75mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to walls upto any floor height including MS scafolding all as specified and directed.

Supply & Fixing upto any floor height including MS scafolding CI bends (any radiius) diminishing pieces or trapers (larger bore measured) fitted with oval access doors of following sizes

75mm dia

100mm dia

Supply & Fixing upto any floor height including MS scafolding CI branch pieces single (equal or unequal) ordinary or inverted ( spigot or socket type) or with parallel branches of following sizes:-

75mm dia

100mm dia

-Ditto- al as per Srl ietm No. 148 above but double socket of the following sizes:-

75mm dia

100mm dia

Supply & Fixing for cast iron/mild steel Sections such as grill grittings,plates. etc of Grade Fe 410-W, (Gde- E-250) quqlity-A, as in chamber,drain , etc. fixed with connecting plates including bending, welding etc complete all as specified and directed.

Supply & Fixing in repairs for Stainless steel decorative railings,chain,grill gratings,draincover plates, etc staircase (design and pattern as approved) made out of SS pipes, SS flats, SS plates etc. complete with and including necessary welding, buffing/ polishing and fixing complete all as specified and directed by Engineer-in-Charge. Design for stairs/ladders or any others will be as approved by GE. Grade of steel shall be grade 316

Supply & Fixing in repair 8 to10 mm thick, plain glass for door, shutters/partitions etc with and including fitting and fixtures such as wooden/aluminium fram, rubber beading etc complete all as directed

Supply & Fixing in repairs 8 to 12mm thick, toughened glass for door, shutters, partitions, sheves etc with and including fitting and fixtures such as glass handles ss studs, fittings for door pivots etc complete all as directed

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof /wall coverings upto any floor height including MS scafolding and removing Dismantaled materials such as serviceable / unservicesble Plain or corrugated steel sheeting,etc. out side MD land and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge.

Material & labour for pre-painted hot-dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and as directed.

Material & labour for pre-painted hot-dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in ridge/ valley/ gutter fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and as directed.

Material & labour for 1 mm thick plain, black galvanised steel sheet as in ridges,hips, valley gutters,drip and straight flashings (length and girth as fixed) and Valley gutters fixed with rivets or other suitable arrangements over including MS brackets Trapezoidal shape of required profile with desired slope etc complete all as specified and as directed by Engr-in-Charge.

Material & labour for Chequered cement concrete tiles/parking tiles of any size 18mm to 25mm thick set jointed and pointed in neat cement slurry in floors with in equal proportions & pigments with red and yellow colour over including 20mm thick screed bed in CM 1:6 complete all as specified and directed

Material & labour PCC 1:2:4 type B1 using (20 mm graded aggregate) as in kerbing all around of tile complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above ground level un re-inforced complete all as specified and directed. .

Demolition of reinforced (reinforcement cut as required to facilitate demolition) cement concrete in ground floors and paving not exceeding 15 cm thickness( below or above ground level) all as directed.

Material & labour for precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) set in cement mortar (1:6) work for landings, cover slabs, manholes, chajjas, water troughs, manger shleves and similar articles with plain faces complete all as specified and as directed

Material & labour mild steel TMT (CRS) bars 6 to 8mm dia and over cut to length bent shape as required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S complete all as specified and as directed

Material & labour for PCC of type D2, 1:4:8 using (40mm graded stone aggregate) 100mm thick as in sub base complete all as specified and directed.

Material & labour PCC 1:3:6, type C2 (using 40 mm graded agg) 75 mm thick as in plinth protection complete all as specified and directed.

Material & labour for PCC (1:3:6) type C1 using 20mm graded stone aggregate in coping bed black etc including necessary form work complete all as specified and directed.

Material & labour for cement concrete 1:2:4 type B2 (using 40mm graded stone aggretate) as in surface channel or drain complete all as specified and directed.

SATGURU ENTERPRISE (BID ID -3195687)

the bhimani group of companies (BID ID -3200716)

SN CONSTRUCTION (BID ID -3195284)

DHARICHHAN ENTERPRISE (BID ID -3196551)

RAMESH ENTERPRISES (BID ID -3196076)

SHREE JAGDISH FURNITURE CO. (BID ID -3193452)

M/s. MAYUR ENTERPRISES (BID ID -3201954)

SHRI SAI ENTERPRISES (BID ID -3196740)