REPAIR MAINTENANCE OF BR WORK AT MILITARY HOSPITAL MHOW DENTAL CENTRE ECHS SWIMMING POOL INF OFFRS MESS GUEST ROOM BSO YARD AND AMN DUMP IN THE AREA OF AGE BR II UNDER GE MAINT INF SCHOOL MHOW

Amount

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area exc 1.5 but nexc 4.0 sqm each complete all as specified and as directed.

Taking down shuters of any description not exc 1 sqm each and removing from site complete all as specified and as directed.

Taking down shuters of any description exc 1 sqm but n.exe 2 sqm each complete all as specified and as directed.

S & F of 2nd class hard wood as in plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F of Mild steel angle or flat iron, small articles such as hold fast , brackets, straps, cleats, etc for door/window chowkats including two coats of red oxide primer complete all as specified and as directed.

M&L for PCC (1:3:6) type C-1 using (20mm graded stone aggregate) as in bed blocks of hold fast, etc complete all as specified and as directed.

Treating back of chowkats of wood, steel and iron work with two coats of tar or coal for black paint. complete all as specified and as directed.

S&F of 35mm thick 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed.

S & F of 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F of 35 mm thick factory made, 2nd class hard wood glazed and skeleton shutters open rebeated and prepared to received glass, gauzed, with out sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (a) and for door and fixed with chowkats, chemically pressure treated complete all as specified and as directed.

S & F of 30 mm thick factory made, 2nd class hard wood glazed and skeleton shutters, open rebeated and prepared to received glass, gauzed, with sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (b) for window and fixed with chowkats, chemically pressure treated complete all as specified and as directed.

S&F of factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.

S&F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

Preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.complete all as specified and as directed.

S & F of galvanised mild steel wire cloth of 0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised I wire staples,etc complete all as specified and as directed.

S & F in repair of galvanized mild steel wire clothes 0.56 nominal dia of wire and average width of aperture 1.18mm fixed with beading complete all as specified and directed.

M&L for sheet glass ordinary quality 3mm thick and glazing with oil putty in squares. not exc 0.5 Sqm each complete all as specified and as directed.

M&L for 3mm thick figured glass pin head type in squre not exc 0.5 sqm in each pane ventilator / window shutter complete all as specified and as directed.

Hacking out old broken glass ( any tickness size ,quality or description ) from wooden frame or steel etc complete all as specified and directed.

S&F of 100 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F of 75 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F of 50mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F of 150 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed.

S&F in repairs of 150 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed.

S&F of 125 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed.

S&F in repair of 125 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed.

S&F of 150 mm long aluminum alloy handles fabricated anodised of complete all as specified and directed. .

S&F in repairs of 150 mm long aluminum alloy handles fabricated anodised of complete all as specified and directed. .

S&F of 125 mm long aluminum alloy handles fabricated anodised of complete all as specified and directed.

S&F in repairs of 125 mm long aluminum alloy handles fabricated anodised of complete all as specified and directed. .

S&F in repairs of 300 mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type) including fixing clips of sheet, cast or extruded section and fixing bolts and 16mm dia bolt sliding bolts of extruded section complete all as specified and as directed.

Resecuring or easing & adjusting, without taking down, shutters of any description n.exc 1.00 sqm each in same opening complete all as specified and directed.

Resecuring or easing & adjusting, without taking down, shutters of any description exc 1.00 sqm but n.exc 2 sqm each in same opening complete all as specified and directed.

S & F in repair of wooden small fittings such as door and window stoper of 2nd class hard wood and the like including all necessary labours, articles nexc 200cu.cm complete all as specified and as directed.

Dismantling of timber framed filled rails, post, rafters purlins, etc under 40Sqcm in section complete all as specified and as directed.

S & F of plain fillets , square rectangular or triangular in section ,clean sawn secured with nails or brads of 2nd class hard wood exceeding 6sqcm but not exceeding 13 sqcm complete all as specified and as directed.

S & F of plain fillets , square rectangular or triangular in section ,clean sawn secured with nails or brads of 2nd class hard wood exceeding 13sqcm but not exceeding 25 sqcm complete all as specified and as directed.

S & F in repairs of MS framed work as in doors or gates of angle iron, door frame or other section with gusset plate, rails, braces etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating, hold fast of doors and windows chowkat etc, with ends of bars shouldered and or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanksand fixing and similar work confirming to fe 290 Gde E-165 complete all as specified and as directed.

Taking down existing aluminium Door/window shutters of any size, carry out minor repairs with & including replacement of unserviceable top/bottom rail, hinges, rubber beading, etc and also carry out repalcement of broken wire mesh and glass panes wherever necessary and refixing the shutter in the same opening complete all as specified and directed. Note : The wire mesh & glass panes shall be measured & paid seperately

Supply only for sheet glass 5.50 mm thick ordinary quality and glazing with oil putty/rubber beading in squares exc 0.5 Sqm each pane complete all as specified.

S&F in repair of fabricating powder coated aluminium frame work,door shutter ,windows , partisions with one or more rebates sections of approved tint as required for portions including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and directed.

S&F in repair of aluminium powder coated window and ventilator shutters, sliding type without sash bar aluminium section weighing 0.55 kg/m including necessary locking arrangement,guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws etc complete all as specified.

S&F in repair of aluminium powder coated sliding door shutters, aluminium section weighing 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.

S&F in repair of aluminium extruded section) Door closer hydraulically regulated, desingnatin No. 3, universal type, suitable for door shutter and fixed complete all as specified and directed.

S&F in repair of 100 mm size 4 levers mortice lock (ISI marked) vertical type of brass body including fixing and adjustment complete all as specified and directed.

S&F of 100 mm size 4 levers mortice lock (ISI marked) vertical type of brass body including fixing and adjustment complete all as specified and directed.

S&F in repair of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repair of 100 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring and rubber piece in floor, etc complete all as specified and directed.

S&F in repair of prelaminated particle board 18/19mm thick interior grade, prelaminated on one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame works as in cupboard shutter / cupboard shelves, pelmet, with and including external teak wood lipping 6mm thick and 18/19mm wide fixed with nails on edges complete all as specified and directed.

S&F in repair of 19 mm thick block board grade -2 interior grade ,commercial type fixed with screw to timber frame work as in shelves , Cup board shutter in kitchen etc compllete all as specified and directed.

M&L in repair for 0.9 mm thick decorative laminate type -I of surface finish ,colour and pattern as approved fixed with approved adhesive as maker's instruction complete all as specified and directed.

S&F in repairs of 30 mm wide contineous piano hinges mild steel ,bright finish or electro-galvanised complete all as specified and directed.

S&F in repair of 25 mm dia mild steel PVC coated drappery curtain rod with brass /nickel chrom polish bracket complete all as specified and directed .

S&F in repair of 300 mm ordinary rat tail rod pattern door spring MS incl roller & plate all as specified and as directed.

S&F in repairs of 100 mm hasp & staple safety type of aluminium anodised including bolt to hinges plate and fixed with screws complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quions arches , pillars etc complete all as specified and as directed.

M & L for Brick work (Expect brick) with sub class B bricks (modular size), straight or curved on plan exc 6m mean radius, built in CM (1:4) in any position complete all as specified and as directed. Note :(Bricks will be reused obtain from demolition)

M&L for brick work in CM ( 1:4 ) with using sub class `B ` bricks (modular size) straight or curved on plan exceeding 6.0mtr mean radius complete all as specified and directed.

M&L for brick work with sub class `B bricks (modular size), straight or curved on plan to any redious as in hald birkes thick wall built in CM (1:4) complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) on bricks or concrete surface finished even and smooth without using extra cement complete all as specified and as directed.

M & L for cement concrete (1:2:4) type B-1 using ( 20 mm graded stone aggregate) as in coping, surface channel, bearing course, manhole/ drain cahhels and other similar works , etc in including necessary formwork complete all as specified and as directed..

M&L for rendering 10 mm thick in CM ( 1:6 ) on wall/ concrete surfaces finish even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM ( 1:4 ) on wall/ concrete surfaces finish even and smooth without using extra cement using WPC (liquid) complete all as specified and directed.(Note: WPC (liquid ) shall be measured and paid separetly)

M&L for 5 mm thick plaster on ceiling in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed .

Supply only Liquid water proofing compound complete all as spesified and directed.

Extra for forming fair finished surfaces of drain 30 cm inner girth in cement concrete using extra cement including forms mouldy mittered/ stopped ends complete all as specified and as directed..

M&L for PCC (1:2:4) type B-0 using (12.5mm graded stone aggregate) as in coping complete all as specified and as directed.

M & L for preparation of new plastered surface of wall and applying two coats of oil emulsion distember over a coat of over a coat of cement primer over a coat of JK/Birla wall care putty complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coat of cement based paint over a coat of cement primer complete all as specified and directed

M & L for preparing new surfaces of wall and applying three coats of white wash on ceiling and cornices complete all as specified and directed.

Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and one coat of white wash on walls complete all as specified and directed.

All as per item No. 73 above but on ceiling. complete all as specified and directed.

M&L for complete removal of old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over and including one coat of birla wall care based putty (where it is required) all as specified and directed by Engr-in-Charge. Note:- Putty shall be measured and paid seperately under Srl Item No. 171)

Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and apply one coat of oil emulsion distemper all as specified and directed.

Preparation of old painted surfaces of wood/wood based materials exc 10cm width or girth and applying one coat of synthetic enamel paint as directed and specified.

All as per item No. 77 above but on steel surfaces. complete all as specified and directed.

M&L for complete removal of old decorated surface of wall and applying two coat of interior plastic imulsion paint white/coloured over and including one coat of white cement based putty (where it is required) all as specified and directed by Engr-in-Charge. Note:- Putty shall be measured and paid seperately under Srl Item No. 171)

M & L for preparation of old decorated surface of wall including brooming, down, scrapping down smoke spot and stopping nails mark by filling by birla putty and applying one coat of interior plastic imulsion paint white/coloured all as specified. Note:- Putty shall be measured and paid seperately under Srl Item No. 171)

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land all as specified and as directed .

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.50mm graded stone aggregate as in sub base, levelling course, etc complete all as specified and as directed.

M&L for 40mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in flooring complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation, sub base of floor, etc complete all as specified and directed

M & L for 75mm thick cement concrete (1:3:6) type C2, using 40mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth without using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed.

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) and rubbish of the primeses complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including 15mm thick screed bed or bedding layer in CM (1: 6) complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1: 6) complete all as specified and directed.

M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1: 6) complete all as specified and directed.

M&L for scratch free vitrified ceramic tiles 10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

All as per item No 90 above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar (1:4) an wall complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size (300mm x 250mm) x 7mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size (450mm x 350mm) x 7mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified and as directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size (25cm x 25cm) x 25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size (40cm x 40cm) x 30mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM (1:6 ) complete all as specified and as directed.

M & L for 10mm thick joint free 'Endura cool roof (SRI) tile' in light shed floor tiles (square/ rectangular) area of each tiles exc 0.09 sqm but n exc 0.18 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

All as per srl No 96 above but as in skirting /dado etc with and including 10 mm thick rendering in cement mortar (1:4) on wall complete all as specified and directed.

Demolation of stone slab and tiles of any description or thickness in floors aprons etc laid bedded and poiented in any mortar compelte all as specified and directed

M & L for machine cut kota stone slab in flooring 18 to 20mm thick laid & jointed with grey cement mixed with pigment to match the shade of slab including rubbing and mirror polishing finished laid over and including 20mm thick screed bed or bedding layer in CM (1:6) rounding to edges of stone slab as in step, cooking platform and other similar specified and as directed.

M & L for machine cut kota stone slab flooring 18 to 20mm thick as in riser of step, dado and skirting over and including 10mm thick (1:4) CM backing coat on vertical surface of wall with rubbing and mirror polishing finished, rounding to edges of stone slab as in step, cooking platform and other similar situations, etc complete all as specified and as directed.

M&L for 15-18 mm thick green marble of approved quality of any size set and jointed in grey cement slurry laid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges compete all as specified and as directed.

M&L for 18 mm thick Black granite slab of approved quality of any size bedded and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges complete all as specified and directed.

M&L for 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and laid over and including 25mm thick sand cushion complete all as specified and as directed.

M & L for precast cement concrete (1:2:4) type B-1(20mm graded stone aggregate ) as in kerb and edging to road and footh path, etc including chamfered,weathering, throating etc and setting in CM (1:4) complete all as specified and as directed.

Demolition of cement or lime concret in any despription along with tarfelt treatment and cement mortar bedding from roof removal rubbish out side MD land complete all as specified and directed.

M&L for Plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in levelling course and other works as in roof, kerb, coping, padding etc complete all as specified and as directed.

M&L for water proofing treatment to non accessible roof and edges (vertical or tapered) etc. in following sequence:- (i) Properly cleaning and drying the surface (ii) Rendering 10mm thick in CM (1;3) mixed with WPC (iii) Applying a coat of bitumen primer @ 1.2Kg/Sqm and primer shall be allowed to dry over night. (iv) Laying APP based modified water proofing membrane of weight not less than 3.5kg per sqm and thickness not less than 3 mm, with 100mm overlaps, sealed and bonded to the surface by 'torchon' method (v) Applying two coat of bituminous based aluminum painting @ 0.15 kg/Sqm each coat on water proofing treatment with preparation of surfaces complete all as specified and directed .

S & F in repair of precast cement concrete louvers and jallies 50mm thick (measured solid) (1:2:4cm) , type B-0 (12.5mm graded aggregate) set in cement mortar (1:4) including all moldings but excluding frame complete all as specified and as directed.

Demolition of cement concrete of any desription and in any position not other wise specifically provided for compelte all as specified and directed .

M&L for repair of RCC (1:2:4) type B-1, (20 mm graded stone aggregate) in cover slab,small culvert slab,and similar work etc omplete all as specified and directed.

M&L for providing precast RCC (1:2:4) type B-1, (20 mm graded stone aggregate) as in precast posts, fencing posts, straining or terminal posts, struts etc, for fencing average sectional area exc 100Sqcm and nexc 250 sq cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and as directed.

Cleaning and removing all dirts and scales from service water tanks and from mouth of circulating pipes etc capacity of tank exceeding 250 ltr but not exceeding 500 ltr complete all as specified and directed.

All as per item No 112 above but exceeding 500 ltr but not exceeding 1000 ltr capacity complete all as specified and directed.

S& F in repair of Rotational moulded Polyethylene water storage tank 500 liters capacity (cylidrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR part I incl brass float valve 20mm dia and complete all as specified and as directed.

S& F in repair of Rotational moulded Polyethylene water storage tank 1000 liters capacity (cylidrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR part I incl brass float valve 20mm dia and complete all as specified and as directed

Taking down and refixing only 15mm bore old steel tubing and connection in new or old position complete all as specified and as directed.

All as per item no 116 above but 20mm bore complete all as specified and as directed.

Taking down or up steel tubing & connection of 15mm dia complete all as specified and directed.

All as per item No 118 abvoe but 20mm dia complete all as specified and directed.

S&F of steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm bore pipes complete all as specified and as directed.

S&F of steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 20mm bore pipes complete all as specified and as directed.

S&F in repair of 15mm bore bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified and directed.

S&F in repair of fancy type chromium plated15mm bore bib tap two way cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified and directed.

S&F in repair of stop valves fancy type chromium plated with long shanks fixed with 15 mm dia bore pipes complete all as specified and as directed.

S&F in repair of pillar taps (swan neck type) cast copper alloy with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified and directed.

S&F in repair of CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed..

S&F in repair of fancy type chromium plated15mm bore two way angle valve cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified and as directed.

S&F in repair of CP WHB mixer for mixing hot & cold water screwed down for iron pipe 15mm bore complete all as specified and as directed.

S&F in repairs of concealed stop valves fancy type chromium plated with long shanks and cup fixed with 15 mm dia bore pipes complete all as specified and as directed.

S&F in repair of 125 mm size chromium plated shower rose with siwel joint suitable for 15 mm bore GI pipes comlete all as directed..

S& F in repair of CP toilet paper holder complete all as specified and as directed.

S&F in repair of vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes complete all as specified and as directed .

S&F in repair of vitreous china squatting pan `Orissa ' pattern of size 580mm x 440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe etc and lime concrete bedding including 'P' or 'S' trap complete all as specified and as directed.

M&L in repairs for PVC valve less,syphonic action type flushing cistern,low level ,white with inlet ball valve,float and handle including brackets and connection to pipe and fixing of chain and pull or lever if any complete all as specified and directed.

S&F in repair of water jet spray CP 15 mm bore size along with PVC cord to EWC complete all as specified and as directed. .

S&F in repair of health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and as directed. .

S&F in repair of vitreous china wash hand basin white flat back, size 550mm x 400 mm including bracket but excluding taps ,waste pipes , chain and plug etc complete all as specified and directed.

S & F in repairs of vitreous china wash basin white (oval shaped under counter) of size 550mm x 400mm including 32mm brass CP waste coupling complete all as specified and as directed.

S&F in repairs of vitreous china urinal bowl urinal flat back, size of (465x355x265) mm white (min)with grating and union for discharge pipe, urinal spreader with waste pipe and all fiting for urinal.complete all as specified and as directed.

M&L for in repairs cast iron floor trap with grating including jointing to waste pipes in cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate ,75mm dia outlet complete all as specified .

S & F in repairs of PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and as directed.

S&F in repairs of CP grating 100mm dia including filiing of white cement with trap, etc complete all as specified and as directed.

S&F in repair of kitchen sink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wall or including fixing cantilever bracket and connecting union to pipes over all size (915x460) mm bowl size (410x330x160) mm including taking out unserviceable kitchen sink complete all as specified and as directed.

M&L in repair for stain less steel plate rack for kitchen 1 mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as specified and as directed by Engineer-in-Charge.Note:- Size of plate rack should not be less than (900x1200) mm and weight of rack shall not be less than 8.5 Kg each.

S&F in repairs of PVC connection 15mm size with PTMT nuts of length 450 mm long complete all as specified and as directed.

S&F in repairs of PVC waste pipe for urinal/wash basin/ sink pipe 32mm bore 65cm long complete all as specified and as directed.

S&F in repair of cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors using sand cast CI pipes 75mm bore pipes etc complete all as specified including dismantling old pipe complete all as specified and directed.

All as per item No 148 above but for 100mm bore complete all as specified and directed.

S&F in repair of 110mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F in repair of 75mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S & F in repair of 110 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

S & F in repair of 75 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc as in repair complete all as specified and directed.

S& F in repair of CP towel ring, dia not less than 200mm complete all as specified and directed.

S&F in repair of 15mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Min Weight 15mm-142 gms) complete all as specified and as directed.

S&F in repair of 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Min Weight 20mm-210 gms) complete all as specified and as directed.

S & F in repair of Pre-painted galvalume aluminium zinc GI based profile pattern steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engieneer- in Charge. Note: The Prepainted galvalume aluminium zinc GI based profile pattern steel sheet sould be TATA Blue Scope Colourbond XRW or Equivalent.

M&L in repair for steel work in tubular trussles, purlins, rafter, tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-1161-1979 grade ST-240 complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed.

M&L for Running welding in repairs thickness of metal to be welded n.exc 6 mm complete all as specified and directed.

Preparation of newly steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.

S& F in repair of 4 mm thick E- Board classic desinger of size (900x600) mm as in false ceiling or similar work. complete all as specified and directed.

S&F in repair of powder coated GI E-grid suspended false ceiling grid system (900x 600) mm with main runner (39x29.7x0.8)mm, cross tee (39x27.7x0.80) mm and wall angle (22.20 x 22.20x0.65) mm ceiling suspended with 4mm dia Gl wire hanger fixed with steel dash fasteners or from purlin of the roof with butterfly clips hold down clips etc complete main runner cross tee, wall angle of MS galvanized (PPP CGS) including 4 mm thick HPSC pre-prime non asbestos fiber cement building board (E-classic) decorative finish fixed to aluminum /CGI frame work with hold down clips in false ceilingcomplete all as specified and directed.

S&F in repair of suspended ceiling of plaster of paris 12.5 mm thick which include GI perimeter channel of size (20 X 27 X 30 X 0.5) mm thick along perimeter of ceiling screwed/fixed to brick wall or existing supports at 610 mm centre to centre suspending GI intermediate channel of size (15 X 15 X 0.9) mm thick from the slit at 610 mm centre with ceiling angle (GI) of size (25 X 10 0.55) mm thick fixed to the sollit with GI cleat 0.5 mm thick having knurted web of 51.5 mm and two flanges of size 26 mm each with lips of 10.5 mm fixed to the intermediate channel with the help of connecting clip and in the direction perpendicular to the intermediate channel at 300 mm centres, POP ceiling boards of size 1220 mm width X 12.5 mm thick screwed to ceiling section with 25 mm long was screw @ 230 mm centres, screw fixed mechanically either with screw driver or drilling machine with suitable attachment. Ceiling shall be sealed at joints and finished with jointing compound etc complete including finishing the exposed surfaces of false ceiling with two coats of plastic emulsion paint over a coat of primer complete all as specified and directed.

M&L in repair for provide PVC spout pipe of 25mm bore & 45cm length in sunken floor including cutting holes in brick walls built in cement mortor and making good the dismantled portion in PCC (1:2:4), type B1 with using 20mm graded stone aggregate with wall finish at the disturbed portion of external surfaces complete all as specified and directed.

M&L for cutting holes in brick walls built in cement mortor at the starting point of down take soil/waste pipe at any floor, fill the joint of down take pipe & trap with thick mortor in CM (1:1) and making good the dismantled portion in PCC (1:2:4), type B1 with using 20mm graded stone aggregate with wall finish at the disturbed portion of external surfaces complete all as specified and directed.

M&L RCC ( 1:2:4 ) type B-1 using 20mm graded stone aggregate as in kitchen shelves , manhole cover, etc complete all as specified and directed.

M&L form work to suspended slab as in kitchen shelves etc.complete all as specified and directed.

M&L TMT bar 10 mm dia and over, cut to length, bent to shape required ,including cranking ,bending spirally for hooping for columns,hooking end and binding with and including mild steel wire and annealed not less than .9 mm dia or securing with clips complete all as specified and directed.

M &L for one coat of 3mm thick wall care putty on walls/ceiling all as specified and directed

m/s modern builder

M/s Himgiri construction

M/S Sunshine Construction