SPECIAL REPAIR TO BUILDING NO P-1004 AT CTI, AFS

Amount

Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as on internal surfaces of walls complete all as specified and directed.

M&L for rendering 15mm thick out of 15mm thick ,5mm thick in CM 1:4 over 10 mm thick in CM 1:6 mixed with water proofing compound (over external/roof plaster for WPT) for fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured & paid seperately.

M&L for 10mm thick rendering on concrete surfaces as in ceiling in cement mortar 1:4, surfaces to be finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound ISI marked all as specified.

M&L for distempering walls with two coats of washable oil emulsion distemper on new surfaes over a coat of alkali resistant priming paint (white or tinted) including preparation of new surfaces all as specified and directed.

M&L preparation of newly plastered surfaces and applying two coat of white wash as on ceiling all as specified and directed.

Material & Labour for preparation of new plastered or un- plastered surfaces and walls including cornices, pilasters etc and applying two Coats of cement base paint complete all as specified .

M&L applying one coat of oil emulsion distemper over old decorated wall surfaces of any description including preparation of surfaces all as specified and directed.

M&L for Preparation of plastered or unplastered old decorated surfaces of walls including cleaning by brooming down scrapping down smoke & moulds efflorescent salts and applying one coat of white wash on walls all as specified

M&L for Preparation of plastered or unplastered old decorated surfaces of walls including cleaning by brooming down scrapping down smoke & moulds efflorescent salts and applying one coat of white wash on ceiling all as specified

Material & Labour for preparation of old plastered or un- plastered surfaces of walls including cornices, pilasters etc and applying one Coats of cement base paint complete all as specified .

Material and labour for preparation of old external surfaces of walls including cornices, plasters etc (Plastered or un plastered surfaces) and applying one coats of exterior emulsion coloured complete all as per manufacture instructions all as specified and as diredted.

S&F in repairs GI wire netting 0.90 mm dia and 12 mm mesh lathing to wood or metal studding, joists, concrete /brick walls etc in walls, ceilings, stanchions, beams, etc including all laps, cutting and waste in patches n exc 5 sqm each, including taking down old and jointing new to old as required.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish of the premises all as specified and as diredted.

M&L for rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles etc all as specified and as diredted.

M & L Screed bed or bedding layer of mortar 15mm thick for laying floor tiles (CM 1:4) complete all as specified and as directed.

M&L for coloured glazed ceramic tiles of size 300x200mmx6-7mm thick, on verticals surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed.

M & L for Non-skid ceramic coloured tiles 7 to 8mm thick , area of each tiles exc 0.11 sqm but not exc o.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M & L for Non-skid ceramic coloured tiles 7 to 8mm thick , area of each tiles exc 0.06 sqm but not exc o.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M & L for Non-skid ceramic coloured tiles 7 to 8mm thick , area of each tiles exc 0.11 sqm but not exc o.18 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Dismantling of Stone slabs and tiles of any description, any position and thickness in floors, cooking platform, aprons etc complete all as specified and as directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15 mm thick mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) walls and like in 12 mm thick mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Rounding to edges of granite slab all as specified and directed

Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames wooden/steel) complete all as specified and as directed.

Taking down Chowkhat or frames exc 1.5 Sqm but n exc 4 Sqm each with shutters(Without taking off shutters from the frames wooden/steel) complete all as specified and as directed.

Taking down shutters of any description exceeding 1Sqm and not exceeding 2 Sqm each.(Wooden/Steel) all as specified and as directed.

Taking down shutters of any description n exc 1 Sqm each.(Wooden/Steel) all as specified and as directed.

S&F steel ventilators, frame with top hung shutter including hinges, steel pegs, stay etc complete all as specified and directed.

S & F Steel windows, frame with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded and all as specified and directed.

All as per ser No 31 here-in-before but windows with side hung shutters without glazing bars and all as specified and directed.

S&F steel windows or ventilators, fixed type, with glazing bars.

S &F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed.

S &F 4 mm thick frosted glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed.

S& F Pressed steel frames of size 125 x 60mm for doors with one or more repates including necessary fixing lugs, hinges, lock strike plate, etc, complete as specified and directed.

M&L for cement concrete 1:3:6 type C-0 using 12.50 mm graded stone aggregate to fill the back of chowkats complete all as specified and directed.

Cutting holes in brick/stone walls built in CM for inserting hold fast and making good dismantled portion in CM1:3 or PCC 1:2:4 (type B0) using 12.5 mm graded aggregate depth of embedded portion of hold fast not exceeding half brick complete all as specified and directed.

S & F 35 mm thick flush shutters , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S &F 2nd class hardwood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass/ gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.24 (a) complete all as specified and directed.

Supplying and fixing of PVC hollow door frame of size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm thick rigid PVC foam sheet, mitre cut at two corners and joined with two nos of 150mm long brackets of 15mm x 15mm MS square tube. The two vertical door profiles are to be reinforced with 19mm x 19mm MS square tube of 19 gauge, EPDM rubber gasket, weather seal to be provided through out the frame. The door frame shall be fixed to the wall using 65/100mm long MS screws through the frame using PVC fasteners. A minimum of four nos of screws to be provided for each vertical member and minimum of two nos of screws for each horizontal member complete as per Manufacturer’s specification and drawing and as directed.

Supply and fixing with particle board core factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S & F 100 mm long heavy weight rolled Mild steel butt hinge with galvanised mild steel hinge pin all as specified and directed.

S & F 150 mm long Extruded Aluminium anodised alloy handles , fabricated type all as specified and directed.

S & F 200 mm long Aluminium anodised, barrel tower bolt of extruded section and fixed all as specified and directed.

S & F 150 mm long Aluminium anodised, barrel tower bolt of extruded section and fixed all as specified and directed.

S & F 300mm in Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed all as specified and directed.

M&L for preparation of new wooden surfaces of any description exc 10 cm with or girth and applying two coats of synthetic enamel paint over a coat of pink wood primer and all as specified and directed.

M&L preparation on new steel surfaces of any description exc10cm width or girth including preparation and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M& L Preparation of old treated wooden surface exceeding 10 cm width and grith and applying one coat of synthetic enamel paint complete all as specified and directed.

M& L Preparation of old treated steel surface exceeding 10 cm width and grith and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in Galvanised mild steel wire cloth,0.56mm nominal dia of wire and average width of aperture1.18mm and fixed with tinned tacks, or galvanised wire staples/wooden beads all as specified and directed.

Supply and fix in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of apertures 1.18 mm and fixed with steel fillet in steel window by cutting out, punching the revets all as specified and directed.

Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip and S/F sheet glass ordinary quality 3 mm thick, in squares n.exc. 0.50 Sqm in each pane including. Necessary new oil putty or with existing metal beadings complete all as specified and directed.

Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip and S/F figured glass, pin head type 3 mm thick, in squares n.exc. 0.50 Sqm in each pane including. Necessary new oil putty or with existing metal beadings complete all as specified and directed.

S&F for cutting out old hinges from steel frame by welding or other means and replaced with & including 100 mm long MS Butt hinges complete all as specified and directed.

S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders , framed balusters, walk ways, railings, framework of water tanks and similar work con-forming to Fe 290, Gde E 165 all as specified and directed.

M&L for Providing, cement concrete 1:3:6 type C1( using 20 mm graded stone aggt) in window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match(including demolition of the exisiting concrete) all as specified and directed.

Resecuring or easing and adjusting wooden shutters of any description exc. 1 Sqm but n.exc. 2 Sqm each without taking down all as specified and directed.

S&F in repair 600mm long Tubular towel rail PTMT fixed with and including chromium plated brass screws and wooden /plastic cleats. (Minimum weight 190 gms) complete all as specified and directed.

S & F in repair bib tap standard of PTMT any colour screwed for iron pipe and fixed,15 mm bore (minimum weight 90gms) all as specified and directed.

S&F in repair Pillar taps fancy type of PTMT any colour high pressure screwed for iron pipe (Minimum weight 15mm - 120 gms.) all as specified and directed.

S&F in repair Stop valve of PTMT any colour high pressure screwed for iron pipe (minimum weight 15mm-90gms) all as specified and directed.

S & F in repair shower rose chromium plated 120 mm with or without swirel joints including fixing to steel pipe of 15 mm bore all as specified and directed.

S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers complete all as specified and directed.

S&F in repairs of plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified and directed.

S & F in repairs PVC low level flushing cistern 10 Lit capacity including necessary brackets incl connecting flush pipe etc and making good the disturbed surfaces all as directed

S & F in repairs viterous china wash down water close (Pedestral pattern) EWC white incl plastic water closet seat cover and mild steel chromium plated on aluminium hinging device and connecting to 'P' or 'S' incl connecting flush pipe with flushing rim all as specified

S&F in repairs viterous china squatting pan Orrisa pattern size 580 x 440 mm white with "P" and "S" trap front or back inlet etc with integral foot rests incl provisioning of lime/cement concretes all as specified and directed.

S&F in repairs vitreous china white wash hand basin flat back of size 550x400mm including CI/MS brackets, cutting for and pinning in brackets but excluding waste pipe all as specified and directed.

S&F in repairs PVC waste pipe 32mm bore for WHB & Sink all as specified and directed.

Material and labour for grinding and polishing of terrazzo floor with machine including wax polishing all as specified and directed by Engr-in- charge.

Material and labour for grinding and polishing of terrazzo skirting/ dado manually with wax polish all as specified and directed by Engr-in- charge.

S & F in repairs stop valves fancy type chromium plated with long shank and cup ( concealed type ) screwed for iron pipe of 15 mm bore all as specified and directed.

S&F 40 mm dia CPVC pipe as in spout including taking down old damaged CI/PVC waste pipes of any dia in sunken floors, necessary fixing arrangement complete all as directed and specified

S&F in repairs stop valves PTMT any colour high pressure screwed for iron pipe and fixed 20mm bore (minimum weight 90 gms) complete all as directed and specified

S&F in repairs 15mm bore PTMT angular stop valve of any colour high presure screwed for iron pipe and fixed(15mm /90 gm minimum wt) complete all as directed and specified

S&F in repairs gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed 25 mm bore complete all as directed and specified

S&F in repair grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) complete all as directed and specified

S & F in repair waste coupling 32 mm dia of PTMT (half or full threaded) minium weight 45 gram complete all as directed and specified

Taking out steel water tubing and connections of 15 mm dia complete all as directed and specified

Taking out steel water tubing and connections of 20 mm dia complete all as directed and specified

Taking out steel water tubing and connections of 25 mm dia complete all as directed and specified

Taking out PVC water tubing and connections 20 mm dia complete all as directed and specified

Cutting chases, pinning in, making good to facing where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10 cm but n.exc 20 cm girth complete all as directed and specified

M&L for Galvanised steel tubing 15mm bore of tube medium grade with all fittings fixed complete to walls and ceilings or laid in floors complete all as directed and specified

M&L for Gavanised steel tubing 20mm bore of tube medium grade with all fittings fixed complete to walls and ceilings or laid in floors complete all as directed and specified

M&L for Galvanised steel tubing 25mm bore of tube medium grade with all fittings fixed complete to walls and ceilings or laid in floors complete all as directed and specified

S & F in repairs Vitreous china Urinal, Half stall type, white including flush pipe and waste pipe, providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 110 mm with PVC clamps and saddles including taking down existing pipe and fitting complete all as directed and specified

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 75 mm with PVC clamps and saddles including taking down existing pipe and fittings complete all as directed and specified

S & F PVC (SWR) bends of any radius with access door bore of pipe 110 mm all as directed and specified

S & F PVC (SWR) bends of any radius with access door bore of pipe 75 mm all as directed and specified

S & F PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110 mm all as directed and specified

S & F PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75 mm all as directed and specified

S & F PVC (SWR) branch piece single (single 'Y') equal or unequal with access door bore of pipe 75 mm all as directed and specified

S & F PVC (SWR) branch piece double (double 'Y') equal or unequal with access door bore of pipe 75 mm all as directed and specified

S & F PVC (SWR) branch piece single (single 'Y') equal or unequal with access door bore of pipe 110 mm all as directed and specified

S & F PVC (SWR) branch piece double (double 'Y') equal or unequal with access door bore of pipe 110 mm all as directed and specified

S & F 110mm bore PVC (SWR) vent cowl all as directed and specified

S & F 75mm bore PVC (SWR) vent cowl all as directed and specified

S&F 50mm bore Low density polyethlene pipes(LDPF) of pressure rating 6 kgf/cm2 fixed to walls, ceiling or in floors etc including all fittings like tees, elbows, unions, sockets and including taking down of old pipe all as directed and specified

M & L for servicing /easing steel windows shutters of size not exceeding 2 Sqm each including cleaning scrapping hacking oiling/greasing replacing welding broken hinges/ handles/ stays making good disturbed portion painting all as specified as directed by Engr-in –charge

S&F 1000 Ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including removing existing water tank complete all as specified anddirected.

S&F 2000 Ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including removing existing water tank complete all as specified anddirected.

S&F in repairs 25 mm PTMT ball valves high pressure with epoxy coated alluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum wt 25 mm - 455 gms) including removing existing water tank complete all as specified anddirected.

S&F Plain Aluminimum Sheeting 0.56mm thick alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed for crumple joints including necessary screws as all specified and directed.

S&F in repairs for aluminium powder coated corrugated drapery rod 25 mm dia complete all as specified and directed .

S&F for fancy type aluminium anodised powder coated draphery rod brackets suitable for 25 mm dia pipes fixed over 1st class hard wood rounded wooden blocks of 65 mm dia and20 mm thick fixed to stone wall/brick wall using screws incl necessary drilling, plugging & finished with polishing complete all as specified and directed.

S&F in repairs for floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate including removing existing water tank complete all as specified anddirected.

S&F for floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor 150 mm size of cover plat including removing existing water tank complete all as specified anddirected.

Removing complete existing treatment on roof surfaces surfaces by picking , sweeping clean and washig down with water to remove dust, etc including removing existing water tank complete all as specified anddirected.

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and even and smooth without using extra cement including mixing of water proofing compound wherever require including removing existing water tank complete all as specified anddirected. Note:- WPC shall be measured and paid separately.

Material and labour for water proofing treatment on horisontal and vertical surfaces with applying of oil bound bituminous primer @0.20 Kg/Sqm and providing 4 mm thick APP modified water proofing membrane weighing not less than 4.00 kg/sqm reinforced with non woven polyester matt weighing not less than 160 gms/sqm including minimum 10 cm side over laps and 15 cm end lap torch sealed and bonded as per detailed procedure on note No 6 of TD drawing No AFB/TD/260/06 sheet No 1/1(R) and applying a coat of blown grade @1.2 kg per sqm hot bitumen 90/15 over and below the membrane finished with solar reflective bituminous aluminium paint/primer @0.1 Kg per sqm all as specified and as directed.

S&F in repairs for PTMT health faucet with 1.0m long, PVC flexible pipe and wall hook complete all as specified and directed.

S&F in repair PTMT soap dish fix to wall all as directed and specified

S&F Towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats, as specified and as directed.

M&L for Complete removal of existing treatment, preparation of old surfaces and applying two coats of oil bound distemper over a coat of wall primer on plastered surfaces for preparatory to distmpering as on ceilings complete all as specified and as directed .

M&L for Complete removal of existing treatment preparation of old surfaces and applying two coats of oil bound distemper over a coat of chalk whiting, on plastered surfaces for preparatory to distmpering as on walls complete all as specified and as directed .

Demolition of cement concrete (unreinforced) any description and in any position not otherwise specifically provided for all as specified and as directed .

M&L for 75 mm thick PCC 1:3:6 type C-2(using 40 mm graded mechanically crushed stone aggregate )as in subbase , paving and plinth protection finished even and smooth without using extra cement all as specified and as directed .

M & L 75mm th PCC 1:4:8 type D-2 as in sub base, Floors, Paving finished even and fair complete all as specified.

Demolition of brick work, stone massonery, PCC block walling built in cement mortar or cement lime mortar including all quoins, arches etc complete all as specified and as directed .

M&L pre-cast PCC 1:3:6 type C1 (20 mm graded agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 all as specified and as directed .

M & L for making groove in plaster of size 10mm width and 8mm depth in junction of wall and Col/Beam and applying Sika Primer 3N and filling with Sikaflex Construction (AP) with 112gm sealant/rm incl thermocol rod backup as per manufacturer's instructions all as specified and as directed .

M&L kota stone slab 20 to 25 thick of size 600 x 600 mm (Pre grinded and polished) bedded, jointed and painted with grey cement slury incl cutting and grinding/polishing incl 15 mm th 1:6 CM bedding layer incl dismantling all as specified and as directed .

S&F for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed incl 10 mm thick plaster in CM 1:4 incl dismantling complete all as specified & directed

M&L in repairs for Providing precast cement concrete 1:3:6(using 12.5 mm graded stone aggregate) set in CM 1:4 louvres and jallies, 25mm thick (measured solid), including all mouldings complete all as specified & directed

S&F vitreous china urinal partition white of size 310 x 700mm fixed in repairs complete all as specified & directed

S&F in Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified & directed

S&F in repairs 375 mm Mild Steel ,ordinary rat tail rod pattern springs including roller and roller plate , necessary weldding all as specified and directed

M&L for cleaning the cracks of masonry wall of 10mm wide removing all loose materials and cutting 'V' grooves and applying a 100+NIIILEGR(WHITE COLOUR) MANUFACTURED BY M/S FOSROC/equvalant Chemicals to close the masonry cracks and preparing the surface to receive the surface finish and finishing the surfaces with necessary white wash/cement base paint/distemper etc complete all as specified & directed

S&F for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks(stay) heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties hooks for hanging fans, plain angle celeats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde -E-165 complete all as specified & directed

S&F in repairs MS casement stays size 300mm with hinged joint and two plates with stud complete all as specified & directed

S&F in repairs MS handle (left/right) for steel window as per sample approved & directed

M&L for applying one coat of oil emulsion distemper on old ceiling surfaes of any description including preparation all as specified and directed.

Gnani Builders

PATEL CONSTRUCTION

S CHANDRASHEKAR (SREE BUILDERS)

K. VENKATESH NAIDU

Maruthi constructions