REPAIR / RESURFACING OF VARIOUS ROADS INCLUDING ROAD SIDE FURNITURE UNDER GE (WEST) HISAR

Amount

Repair to pot holes of any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, cutting around edges to at least 30mm in depth, making good by applying a tack coat with bituminous primer VG-10 @ 4 Kg per 10 Sqm putting in premix bituminous macadum, well rammed and sealed with 9.8 Kg of binder VG-30 per 10 Sqm binded with 0.09 cum of stones chipping 6.3mm size and again well rammed (including supply of premix macadum binder VG-30 and chippings) Depth of pot holes exc 30mm complete all as specified and directed.

M&L for Preparation of black top surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with air compressor to remove loose dirt etc complete all as specified and directed.

M&L Applying evenly a priming tack coat @ 5 kg per 10 Sqm with paving bitumen VG-10 complete all as specified and directed.

M&L for bituminous concrete design mix 30mm consolidate thickness using graded crushed stone aggregate premixed with 5.5% binder content paving bitumen VG-30 by weight of total mix laid with hydrostatic paver finisher with sensor and hydraulic control rolled and compacted with 8 to 12 tonne power roller to be followed by smooth wheel pneumatic roller of 15 to 30 tonne having a tyre pressure 7kg/Sqcm finished by final rolling with 8-10 tonne tandem roller required camber and gradient complete all as specified and directed.

M&L premix bitumen macadam with binder content 4% of bitumen (paving bitumen VG -30 grade) by the weight of total mix laid, rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with 8 to 12 tonne power roller complete all as specified and directed. Notes for item No 4 & 5 :- (i) Premix concrete shall be mixed in hot mix plant, transported from plant to work site and laid / spread by means of hydro static paver finisher with sensor. (ii) Filler for semi dense asphaltic concrete shall be stone dust @ 2% of total mix. (iii) Contractor shall quote his rate on the basis of binder as mentioned in this item. If there is any variation in the actual binder content used as per design mix approved by GE, the rate shall be adjusted @ ₹ 36.00 per Kg of binder used. However no price adjustment shall be made if the binder content works out to more than as specified in said items. (iv) Work shall be executed as per design mix approved by GE.

M&L for preparation of new / old surfaces providing and making lines, dashes, arrows, letters etc on road with hot applied thermoplastic road marking paint min 2.50 mm thick complete in all respects such as furnishing all labour, material, tool, Equipment incl all incidental cost necessary to carryout the work at site conforming to technical specification clause no.803 of MORTH specifications 4th Revision of 2001/Latest edition complete all as specified and directed.

S&F in repair cat eyes two way reflective panel amber or Red, Aluminium body size 100 x 100 x 20mm to give the maximum reflection which enhance the visibility of the vehicles during dark and bad light conditions complete all as specified and directed. Make : OSCAR OS-785 or equivalent in makes Dark Eye/ Trafitronics.

S&F in repair retro reflective sign board of size 900 x 600mm rectangular (Shape) made of 3mm thick ACM sheets (Aluminium Composite Material) both faces fully covered with retro reflective sheeting type IV and colour as approved by Garrison Engineer, Subject (Words, arrows, full stop, dash) / Mark / border / logo etc will be made as directed. Sign Face will be rivetted with back support frame of stainless steel pipe of 25mm dia shape as approved by GE and two vertical posts of 50mm bore of stainless steel pipe 2.00M above the GL and 60Cm below the GL embeded in PCC 1:2:4 type B-1 block of size 60 x 60 x 80Cm post hole including PCC (1:2:4) in foundation & necessary excavation in post hole complete all as specified and directed. Make : Retro reflective sheeting of make 3M / Alcolite / Avery Dennison.

S&F in repair post delineators made of ABS round body fitted with 2 Nos 100mm dia highly reflective reflectors mounted on 65mm dia MS pipe of 1010mm height duly powdered coated anti rust to be installed in PCC 1:2:4 type B-1 block of size 300 x 300 x 300mm including excavation of necessary post hole complete all as specified and directed. Make : Oscar Model No : OS 798 or equivalent in makes Dark Eye / Avery dennison / Alexis / Sharp Eyez / 3M / TATA/ Trafitronic.

M&L for preparation of old painted surface of road side kerb stone of any description not otherwise described exc 10cm width or girth and applying single coat of synthetic enamel paint complete all as specified and directed.

S&F in repair Convex Mirror 800mm dia made up of polycarbonate reflective Mirrors, outdoor use with hood and complete with mounting hardware for upto a height of 1500mm, above GL and 45 cm below the GL with medium grade MS pipe 50mm dia including two coats of anticorrosive paint over a coat of red oxide primer body made of ABS embeded in PCC (1:2:4) type B-1 of block size 30x30x45cm including PCC (1:3:6) type C-1 in foundation and necessary excavation in post hole complete all as specified and directed. Make : Oscar model No OS-790 or equivalent make of DARK EYE / Avery dennison / Sharp eyez / 3M / Traffitronics.

P.K. ENTERPRISES

SULTAN SINGH, CONTRACTOR