8667/GWL/E8 REPAIR/MAINTENANCE OF FURNITURE OF MARRIED ACCNS AND OTHERS MISCELLANEOUS ARTICLES AT BSO FURNITURE YARD UNDER GE GWALIOR

Amount

REPAIRS TO BED PLY WOOD TOP (HARD BED) : FD-246

Dismantling, taking out carefully old existing ply wood of any description and replacement of the same with S&F new ply wood, 12mm thick, commercial on both side, BWR grade of size (as shown on drg) fixed with steel screws made to shape fixed in position complete all as shown on drg, specified and directed.

Replacement of ply wood on both side of head rest frame with S&F new 3.5mm thick ply wood one side teak veneered & other side commercial grade - I (with BWR Resin) and including teak wood beading plain for head rest alround and Half cut round beading front side and other side complete as per drg, beading made to shape fixed in position complete all as shown on drg specified and directed.

Replacement of leg of head rest with S&F new Ist class HW (teak wood) leg made to shape fixed in position complete all as shown on drg specified and directed.

Replacement of plywood 3.5mm thick, one side teak, and plain beading and half cut round beading of foot rest with S&F new ply wood of foot rest fixing in position complete all as shown on drg, specificed and directed.

Replacement of leg of foot rest with S&F new Ist class HW (teak wood) leg made to shape fixed in position complete all as shown on drg specified and directed.

Replacement of long rail with S&F new Ist class HW (teak wood) long rail made to shape fixed in position complete all as shown on drg specified and directed.

Replacement of short rail with S&F new Ist class HW (teak wood) short rail made to shape fixed in position complete all as shown on drg specified and directed.

Replacement of stiffener with S&F new Ist class HW (teak wood) stiffener made to shape fixed in position complete all as shown on drg specified and directed.

Replacement of mild steel bracket with S&F new mild steel bracket made out of 40mm x 40mm x 6mm flat iron, made to shape fixed in position complete all as shown on drg specified and directed .

Polishing one coat to old and two coats to new surface of Bed ply wood (HW) after repairing with french polish of approved Make including preparation of surface.

REPAIRS TO PEG TABLE : FD-25(M), FD-236, FD-277, FD-384

Dismantling, taking out carefully and replacement of old existing broken top of peg table of any description & replacement of the same with S&F new top of peg table with Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 3 mm thick teak wood beading all around made to shape, fixed in position. rest all as per drg and directed by the Engineer-in-Charge.

Replacement of leg with S&F new teak wood leg made to shape.

Replacement of long rail with S&F new teak wood long rails made to shape.

Replacement of short rails with S&F new teak wood short rails made to shape.

S & F new hard PVC/rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg. complete all as specified and directed.

Polishing one coat to old and two coats to new surfaces after repairing with french polish of approved Make including preparation of surfaces of peg table all as shown on drg and directed by the Engineer-in-Charge.

REPAIRS TO TABLE CENTER : FD-29(M), FD-235, FD-274

Dismantling, taking out carefully and replacement of old existing broken top of table center of any description, & replacement of the same with S&F new top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE and including 4 mm thick teak wood beading alround, made to shape, fixed in position, all as shown on drg, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour.

Replacement of leg with S&F new teak wood leg made to shape.

Replacement of long rail with S&F new teak wood long rails made to shape.

Replacement of short rails with S&F new teak wood short rails made to shape.

Replacement of stiffener with S&F new teak wood stiffener made to shape.

S & F new hard PVC/rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg. complete all as specified and directed.

Polishing one coat to old and two coats to new surfaces after repairing with french polish of approved Make including preparation of surfaces of center table all as shown on drg.

REPAIRS TO TEAPOY : FD-34(M), FD-232, FD-278, FD-382

Dismantling, taking out carefully and replacement of old existing broken top of teapoy of any description, & replacement of the same with S&F new top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE and including 4mm thick teak wood beading alround, made to shape, fixed in position, all as shown on drg, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour.

Replacement of leg with S&F new teak wood leg made to shape.

Replacement of long rail with S&F new teak wood long rails made to shape.

Replacement of short rails with S&F new teak wood short rails made to shape.

Replacement of stiffener with S&F new teak wood stiffener made to shape.

S & F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed.

Polishing one coat to old and two coats to new surfaces after repairing with french polish of approved Make including preparation of surfaces of teapoy all as shown on drg.

REPAIRS TO TABLE DRESSING GENTS : FD-31(M), FD-230, FD-379

Dismantling, taking out carefully and replacement of old existing broken top of table dressing gents of any description & replacement of the same with S&F new top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with and including 3mm thick teak wood beading alround made to shape, fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge complete materials & labour.

Replacement of side with S&F new side of 12mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE including 3mm thick teak wood beading alround, made to shape, fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge complete materials & labour.

Replacement of bottom with S&F new 12mm thick ply, teak veneered on one side and commercial on other side grade I with (BWR Resin) made to shape fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge complete materials & labour.

Replacement of drawer with S&F new drawer made to shape fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge

Replacement of back frame with S&F new back frame made out of 45mm x 40mm teak wood members & 6mm thick commercial ply grade BWR type BB, made to shape fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge

Replacement of knob with S&F new chromium plated knob 25mm dia, 24mm length as approved by the Engineer-in-Charge of best quality.

Replacement of mirror with S&F new mirror of size 380mm x 760mm x 5.5mm thick made to shape fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge

French Polishing one coat to old surfaces and two coats to new surfaces including preparation of surfaces for table dressing gents complete all as specified & directed by Engineer-in-Charge.

TABLE DRESSING LADIES WITH MIRROR : FD-32(M), FD-251, FD-378, FD/MAP-II/07

Replacement of short rail of table dressing ladies with S&F new short rail of Ist class HW (MP teak wood). all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

Removing old broken/ U/S knob from table dressing ladies and S & F new 40 mm size CP brass knob as per shape and size shown in drg and as directed.

Replacement of side long rail jointed to leg of table dressing ladies with S&F new side long rail jointed to leg of Ist class HW (MP teak wood). all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

Removing old broken/U/S sunmica from the top of table dressing ladies and S & F new 1.5 mm thick sunmica of best quality fixed with fevicol as per shape and size shown in drg complete all as specified and directed.

Removing old broken/U/S sunmica from the drawer of table dressing ladies and S & F new 1.5 mm thick sunmica of best quality fixed with fevicol as per shape and size shown in drg complete all as specified and directed.

M & L for replacement of U/S 6mm thick back ply wood.

M & L for replacement of U/S stiffener between legs.

Repair of Stool dressing and S & F PU foam cushion with 40 Density with Tapestry cloth as approved by EIC/GE of rate not less than Rs 300/RM complete as per Drg and as directed by EIC.

Dismantling, taking out carefully old existing broken top of table dressing ladies of any description & replacement of the same with S&F new top table dressing ladies of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE, made to shape, fixed in position, all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour.

Replacement of side of table dressing ladies with S&F new side of table dressing ladies all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour.

Replacement of bottom commercial ply with teak (veneered one side) commercial other side) with S&F new bottom commercial ply with teak veneered one side (commercial other side). All as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

Replacement of drawer of table dressing ladies with S&F new drawer as per Drg and approved. all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

Replacement of legs of table dressing ladies with S&F new legs of Ist class HW(MP teak wood). all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

Removing old broken/ U/S sliding glass from table dressing ladies and S & F new 5mm thick sheet glass with plastic handle as per sample, shape and size shown in drg complete all as specified and directed.

Removing of old U/S looking mirror from table dressing ladies and S & F new looking mirror as per sample, shape and size shown in drg duly fixed in and including frame of teak wood and polishing complete in all respect to fix on wall all as shown on drg.

French Polishing two coats to old and new surfaces including preparation of surfaces for table dressing ladies. all as specified & directed by Engineer-in-Charge.

TABLE DINING FOR 8/6/4 PERSONS : FD/MAP-II/03

Top of table dining 8 Persons made out of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with all edges covered with PVC lipping alround all as shown on drgs, specified in particular specification & directed by EIC.

All as per Srl item No. 7.01 here-in-before but top of table dining 6 persons.

All as per Srl item No. 7.01 here-in-before but top of table dining 4 persons.

L-Shape wooden corner of size 4" x 4" x 1" to the Table between legs and rail to be fixed with screw.

Replacement of leg with S&F new teak wood leg made to shape

Replacement of long rail of table dining 8 Persons with S&F new teak wood long rails made to shape

Replacement of long rail of table dining 6 Persons with S&F new teak wood long rails made to shape

Replacement of long rail of table dining 4 Persons with S&F new teak wood long rails made to shape

Replacement of short rails with new teak wood short rails made to shape

S & F new Nylon Buffer of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed.

Polishing to table dining with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

BIN LINEN MULTIPURPOSE : FD/E6/MAP/09

Removing of old U/S top from bin linen multipurpose and S & F new top made out of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 04mm thick teak wood beading all-around the top of side board all as shown on drg and as directed.

Removing of old and U/S door shutters of bin linen multipurpose S & F of new door shutters made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 04mm thick teak wood beading all around as per size and design shown on drg and as directed.

Removing of old U/S hingses and S & F new hinges to bin linen multipurpose as per size and design shown on drg complete all as specified and directed.

Removing of old broken handles and S & F of new chromium plated steel handles to bin linen multipurpose as per shown on drg and as directed.

Removing of old magnetic catcher and S & F of new magnetic catcher to bin linen multipurpose as per size and design shown on drg complete all as specified and directed.

Removing of old U/S side and S & F new side made out of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 04mm thick teak wood beading all around as per size and design shown on drg and as directed.

Removing of old U/S back ply of side board and S & F new back ply of same size made out of 12mm thick commercial plywood (ISI marked) all as shown in drg and as directed.

Replacement of U/S drawer with new drawer of same size and shape. Front of the drawer shall be made out of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE and including handle Sides, base and back of drawer made out of 12mm thick ply wood (ISI marked) and fixing all as shown in drg including one coat of french polish to old and two coats to new surfaces.

Removing of old U/S leg from Side board and S & F new Ist class hard wood teak leg to side board all as shown on drg and as directed.

Polishing one coat to old and two coats to old new surfaces to bin linen multipurpose with french polish to all internal and external surface all as specified and directed by Engineer-in-Charge.

REPAIRS TO TABLE 900 MM X 900 MM W/O DRAWER (3' x 3') (WOODEN) : FD-88(M), FD-291

Dismantling, taking out carefully & replacement of old existing broken table top of Table of any decription & replacement of the same with S&F new table top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with including 4mm thick Ist class teak wood moulded design, beading alround, made to shape, fixed in position all as approved, shown on drg, specified and directed by the Engineer-in-Charge.

Replacement of legs of table S&F new leg made out of Ist class HW (Teak Wood)

Replacement of table frame's rail with S&F new table frame's long rail made out of Ist class hard wood (teak wood) complete all as shown on drgs, specified and directed by the Engineer-in-Charge.

Replacement of Rubber Shoe with screw (steel) with S&F new Nylon Buffer of superior quality screws (steel) of suitable size complete as approved and all as shown on drgs.

S& F new bracket of size 100 x 100 x 30 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws etc complete all as specified and directed.

Polishing one coat to old and two coats to old new surfaces of table after repairs, with french polish of approved Make including preparation of surfaces.

REPAIRS TO TABLE 900 MM X 600 MM WITH DRAWER (3' x 2') (WOODEN) : FD-41, FD-224, FD-283

Dismantling, taking out carefully & replacement of old existing broken table top of Table of any decription & replacement of the same with S&F new table top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with including 4mm thick Ist class teak wood moulded design, beading alround, made to shape, fixed in position all as approved, shown on drg, specified and directed by the Engineer-in-Charge.

Replacement of legs of table S&F new leg made out of Ist class hard wood (teak wood)

Replacement of table frame's rail with S&F new table frame's long rail made out of Ist class hard wood (teak wood) complete all as shown on drgs, specified and directed by the Engineer-in-Charge.

Replacement of U/S drawer with new drawer of same size and shape to Table. Front of the drawer shall be made out of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE and including aluminium anodized knob. Sides, base and back of drawer made out of 12mm thick ply wood (ISI marked) and fixing all as shown in drg including one coat of french polish.

S & F new Stiffener and complete all as shown on drgs, specified and directed by the Engineer-in-Charge.

Replacement rectangutar braket with 08 Nos steel screws suitable size of Ist class hard wood (teakwood) of size 100 mm x 100 mm x 25mm complete as approved and all as shown on drgs.

Replacement of rubber shoe with screw (steel) with S&F new Nylon Buffer of superior quality screws (steel) of suitable size complete as approved and all as shown on drgs.

Polishing one coat to old and two coats to old new surfaces of Table after repairs, with french polish of approved Make including preparation of surfaces.

REPAIRS TO TABLE WRITING : FD-33, FD-249, FD-275

Dismantling, taking out carefully & replacement of old existing broken table top of Table writing of any description & replacement of the same with S&F new table top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE including 4mm thick teak wood beading alround, made to shape, fixed in position all as approved, shown on drg, specified, and directed by the Engineer-in-Charge.

Replacement of shutters (complete) with S & F 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE. complete all as shown on drgs, specified and directed by the Engineer-in-Charge.

Replacement of TOP long rails with S&F new TOP long rail made out of Ist class Hard Wood (teak wood) complete all as shown on drgs, specified and directed by the Engineer-in-Charge.

Replacement of TOP short rail with S&F new TOP short rail of made out of Ist class Hard Wood (teak wood) complete as shown on drgs, specified and directed by the Engineer-in-Charge.

Replacement of drawer with knob brass Chromium plated 40mm dia with S&F complete new drawer made out of Ist class hard wood (teak wood) with knob brass Chromium plated 40mm dia as approved by GE complete all as shown on drgs, specified and directed by the Engineer-in-Charge.

Replacement of Leg with S&F new Leg with made out Ist class MP (teak wood) complete all as shown on drgs, and directed by the Engineer-in-Charge.

Replacement of bottom centre stiffener with S&F new bottom centre stiffener made out of Ist class Hard Wood (teak wood) complete all as shown on drgs, specified and directed by the Engineer-in-Charge.

Replacement of bottom side stiffener with S&F new bottom side stiffener made out of Ist class Hard Wood (teak wood) complete all as shown on drgs, specified and directed by the Engineer-in-Charge.

Replacement of rubber shoe with screw(steel) with S&F new Nylon Buffer of superior qulaity screws (steel) of suitable size complete as approved and all as shown on drgs.

Polishing one coat to old and two coats to old new surfaces to Table writing with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

REPAIR TO SIDE BOARD : FD-26(M), FD-241, FD-371, FD-1112

Removing of old U/S top from Side board and S & F new top made out of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 4mm thick teak wood beading all-around the top of side board all as shown on drg and as directed.

Replacement of bottom & S & F new bottom

Replacement of side & S & F new side

Replacement of shelf with S & F 12mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE

Replacement of partition.

Replacement of back ply with S & F new 6mm thick plywood commercial both side Grade I (with BWR Resin).

Replacement of Bottom long Stiffner with S & F new M.P. Teak Wood Stiffner

Replacement of Bottom short Stiffner with S & F new M.P. Teak Wood Stiffner

Replacement of Legs with S & F new M.P Teak Wood Legs

Replacement of knobs with S & F new 25 mm dia brasic c.p. complete.

Replacement of locks with S & F new locks brass

Replacement of complete drawers with S & F new complete drawers (as per shown on drg) made of 1st class teak wood

Replacement of Piano type hinges with S & F new Piano type hinges light weight

Polishing one coat to old and two coats to old new surfaces to side board with french polish of approved grade and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

REPAIRS TO TABLE DINING 6/8 PERSONS : FD-30, FD-239, FD-273, FD-376, FD-1115

Dismantling, taking out carefully and replacement of old existing broken top of table dining 8 persons of any description & replacement of the same with S&F new table top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE including 4mm thick teak wood beading alround, made to shape, fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge complete materials & labour.

All as per item 13.01 here in but top of table dining 6 persons

Replacement of leg with S&F new teak wood leg made to shape

Replacement of long rail with S&F new teak wood long rails made to shape

Replacement of short rails with new teak wood short rails made to shape

Replacement of stiffener with S&F new teak wood stiffener under the top joining the top long side of top rails of table dining.

S & F new right angle of size 15x 30x 5 mm thick with steel screws to legs complete all as specified and directed.

Provn of new angular bracket 08 nos with steel screws suitable size of Ist class HW (teakwood) of size 125 x 100 mm x 25 mm complete as approved and all as shown on drg.

S & F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed.

Polishing one coat to old and two coats to old new surfaces to table dining with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

REPAIRS TO TABLE BED SIDE : FD-28, FD- 210, FD- 248, FD-276

Dismantling, taking out carefully & replacement of old existing broken table top of Table Bed side of any description & replacement of the same with S&F new table top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 4 mm thick teakwood beading. all as shown on drg and as directed.

Replacement of side of table bed side with S&F new sides with 12 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 4 mm thick teakwood beading. complete all as shown on drg.

Replacement of shelf & bottom with S&F 12 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 4 mm thick beading. complete all as shown on drg, specified and directed by the Engineer-in-Charge.

Replacement of back ply of table bed side with S&F new back ply with 6 mm thick commercial ply wood grade complete as shown on drg, specified and directed .

Polishing one coat to old and two coats to old new surfaces to table bed side with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

TABLE 900X600X760MM WITH DRAWERS : FD-1008

Table top of size 900mmx600mm made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE including 4mm thick teak wood edging all as per drg.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 gauge as per drg.

Stiffeners as per drg.

Repairs to Drawer include tinkering/denting, painting, welding, etc. all as shown as specified & as directed.

Lock all as per drg.

Shoes all as per drg.

Welding work wherever required as directed by EIC

Painting to table internally and externally with synthetic enamel paint of existing color after preparation of surfaces.

TABLE 3'X 2' STEEL WITH OUT DRAWER : FD-1007

Removing of old U/S top and S&F new top made out of 18/19mm thick all as per drg including 4mm thick teak wood edging all as per drg.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 gauge as per drg.

Stiffeners as per drg.

Shoes all as per drg.

Continuous Gas welding as required per 10 CM.

Preparation of old painted steel surface by removing all dents filling with putty and painting with one coat of olive green synthetic enamel paint complete, all as specified and directed by Engr-in-Charge

ALMIRAH STEEL LARGE 1/2 HANGING 1/2 SHELVING : FD-114(M), FD-1033, FD/E6/MAP/18

Lock 75mm stainless steel universal type.

Replacement of MS Base of almirah with S&F new MS Base made out of 1.25 mm thick MS sheet complete all as shown on drg, specified and directed.

Replacement of shelf of almirah with S&F new shelf made out of 1.25 mm thick MS sheet complete fitting with nut & washer all as shown on drg, specified and directed .

Door Shutter (New shutters must be made of 1mm thick MS sheet, made to shape and size, all as specified and shown in drg or as directed by Engr-in-Charge).

Handle 150 mm long chrome plated as per sample.

Replacement of legs of steel almirah large with S&F new legs made out of 1.25 mm thick MS sheet complete all as shown on drg, specified and directed .(Each leg measured & paid)

Preparation of the old decorated/ painted surfaces of the almirah after removing all dents, filling with putty and spray painting one coat of synthetic enamel paint with Ist grade quality of paint (External & Internal) as indicated on drgs to be painted material and labour complete all as specified and directed by Engineer-in-Charge, colour shade as approved by GE.

TABLE BEDSIDE STEEL : FD/E6/MAP/15(R)

S & F new 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE for sides, top and front of table bed side of size 450mmx 500mm placed in position with 4mm thick teak wood edging alround the edges of the top as shown in drg.

S & F new legs to table bed side steel made of 18mm MS square pipe placed in position as shown in drg.

S & F new CP steel 100mm long handle to the drawers of the table bed side steel placed in position as shown in drg.

S & F new 6mm commercial ply at back of the table bed side steel fitted with screws as shown on drg.

Replacement of Upper drawer made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE and provided with 6mm thick bottom of ISI marked commercial plywood of BWR grade.

Replacement of Lower drawer made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE provided with 6mm thick bottom of ISI marked commercial ply BWR grade & telescopic channel of best quality as approved.

Materials and labour of one coat of synthetic black paint on all steel portion of table bed side steel, complete all as specified and directed

S & F new rubber shoes 18mm square of high quality placed in position as shown in drg.

REPAIRS TO STEEL ALMIRAH LARGE : FD-67(M), FD-351, FD-1031

Dismantling, taking out carefully old existing broken U/S Locks with key cover of any description & replacement of the same with S&F new Locks brass six levers, with double key including new key cover complete on external face of Almirah & suitable 4mm dia screws complete machine all as shown on drg specified and directed.

Replacement of Handle with S&F new Chromium plated handle of the size 150 mm complete with nuts and pins complete all as shown on drg, specified and directed.

Replacement of three way locking device with S&F new three way locking device of 10mm dia, MS Rod & brass shackles complete with fixing accessories for steel almirah large of sorts complete all as shown on drg, specified and directed.

Replacement of legs of steel almirah large with S&F new legs made out of 1.25 mm thick MS sheet complete all as shown on drg, specified and directed .(Each leg measured & paid)

Replacement of shelf of steel almirah large with S&F new shelf made out of 1.25 mm thick MS sheet complete fitting with nut & washer all as shown on drg, specified and directed .

Door Shutter (New shutters must be made of 1mm thick MS sheet, made to shape and size, all as specified and shown in drg or as directed by Engr-in-Charge).

Preparation of existing decorated surfaces of the almirah large (steel) with removing all dents, filling with putty and spray painting one coat of synthetic enamel paint with Ist grade quality of paint (External & Internal) as indicated on drgs to be painted material and labour complete all as specified and directed by Engineer-in-Charge, colour shade as approved by GE.

REPAIRS TO STEEL ALMIRAH MED : FD-243

Dismantling, taking out carefully of old existing broken U/S Locks with key cover of any description & replacement of the same with S&F new Locks brass six levers, with double key including new key cover complete on external face of Almirah & suitable 4mm dia screws complete machine all as shown on drg specified and directed.

Replacement of Handle with S&F new Chromium plated handle complete with nuts and pins complete all as shown on drg, specified and directed.

Replacement of three way locking device with S&F new three way locking device of 10mm dia, MS Rod & brass shackles complete with fixing accessories for steel almirah medium complete all as shown on drg, specified and directed .

Replacement of legs of steel almirah medium with S&F new legs made out of 16 Gauge MS sheet complete all as shown on drg, specified and directed.

Replacement of shelf of steel almirah medium with S&F new shelf made out of 16 Gauge MS sheet complete all as shown on drg, specified and directed .

Door Shutter (New shutters must be made of 1mm thick MS sheet, made to shape and size, all as specified and shown in drg or as directed by Engr-in-Charge).

Cleats ( New cleats must be made of 2mm thick MS sheet)

Preparation of existing decorated surfaces of the almirah med steel after removing all dents, filling with putty and spray painting one coat of synthetic enamel paint with Ist grade quality of paint (External & Internal) as indicated on drgs to be painted. material and labour complete all as specified and directed by Engineer-in-Charge, colour shade as approved by GE.

REPAIRS TO STEEL LOCKER OF SORTS : FD-127(M), FD-257, FD-1029, CWE/ BPL/53

Dismantling, taking out carefully of old existing broken U/S Locks with key cover of any description & replacement of the same with S &F new Locks brass six levers, with double key including new key cover complete on external face of locker steel & suitable 4mm dia screws complete machine all as shown on drg specified and directed .

Replacement of Handle with S&F new 100 mm Chromium plated handle complete with nuts and pins complete all as shown on drg, specified and directed .

Replacement of three way locking device with S&F new three way locking device of 10mm dia, MS Rod & brass shackles complete with fixing accessories for locker steel complete all as shown on drg, specified and directed .

Replacement of legs with S&F new legs made out of 1.00 mm thick MS sheet complete all as shown on drg, specified and directed.

Replacement of shelf with S & F New shelf made out of 16 gauge MS sheet complete all as shown on drg, specified and directed .

Replacement with S&F new C.P. conduit pipe 20 mm dia for locker steel or sorts complete all as shown on drg, specified and directed .

Chromium plated safety type 100mm long hasp & staples

Replacement of U/S socket with new aluminium socket/ brackets suitable for MS 20mm dia conduit pipes.

Door Shutter ( New shutters must be made of 1mm thick MS sheet, made to shape and size, all as specified and shown in drg or as directed by Engr-in-Charge).

Preparation of existing decorated surfaces of the locker steel with removing all dents, filling with putty and spray painting one coat of synthetic enamel paint with Ist grade quality of paint (External & Internal) as indicated on drgs to be painted material and labour complete all as specified and directed by Engineer-in-Charge, colour shade as approved by GE.

TABLE 900X900X760 WITHOUT DRAWERS : FD-1009

Table top of size 900mmx900mm made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE including 4mm thick teak wood edging all as per drg.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 gauge as per drg.

Stiffeners as per drg.

Shoes all as per drg.

Welding work wherever required as directed by EIC

Painting to table internally and externally with synthetic enamel paint of existing color after preparation of surfaces

M/s Manish Contractor

M/s Sohan Singh Mathur

M/s Pal Construction

BABA MANIRAMPURI CONSTRUCTION COMPANY

M/s Raghav Traders