8511 REPAIRS TO INTERNAL AND EXTERNAL PLASTERING FLOOR TILINGS PLUMBING AND CONNECTED MISC BR WORK UNDER AGE B R III OF GE (S) PUNE

Amount

M&L for 75mm thick PCC 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in sub base of floor, finished the surfaces fair & even to receive floor finishes including demolition of existing cement concrete of any description, complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 as in floor, finished the surfaces fair & even to receive floor finishes including demolition of existing cement concrete of any description, complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:6 using PCC 1:2:4 type B-1 precast cement concrete blocks complete including demolition of existing brick work or stone boulders or PCC block masonary built in cement mortar including all arches, pillars etc including removal of demolished materials n. exc. 50 m etc. complete all as specified and directed.

M&L for 10 mm thick rendering on fair faces of brick / stone masonary or concrete surfaces in CM 1:4, including finishing the surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed

M&L for rendering 10 mm thick in cm 1:6 on brick / block masonary / concrete surfaces as in walls finished even and smooth without using extra cement including taking down existing cement plaster from brick / block walling including raking out joints, hacking for key, scrubbing down with water etc. , complete all as specified and directed

M &L for two coats of cement base paint over a coat of alkalai resistant primer including preparation of new plastered surfaces of walls, complete all as specified and directed

M&L for two coats of plastic emulsion paint over plaster of paris putty 1 mm thick over a coat of alkali resistant primer including preparation of new plastered surfaces, complete all as specified and directed

M&L for one coat of plastic emulsion paint including preparation of old plastered surfaces, complete all as specified and directed

M&L for coloured glazed ceramic designed tiles as on vertical surface of size 600x300x7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick plaster in CM 1:4 including triangular filleting in CM 1:4 on top edges including dismantling of old wall tiling / wall finishes & cement mortar bedding and rubbish off the premises, complete all as specified and directed

M&L for vitrified tiles double charged 10 mm thick (square/ rectangular) polished 600mm x 1200mm size as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over including screed bed 20 mm thick in cm 1:6 including dismantling of old existing floor finishes & cement mortar bedding and removing serviceable stone slabs / tiles to store and rubbish off the premises, complete all as specified and directed

M&L for vitrified tiles light shade, 10 mm thick (square/ rectangular) polished, 600mm x 1200mm size as on vertical surfaces / dado / skirting, set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick plaster in CM 1:3 including triangular filleting in CM 1:4 on top edges including dismantling wall tiling / wall finishes including cement mortar bedding and rubbish off the premises, complete all as specified and directed

Rounding to edges of stone slabs and polishing in edges, such as in steps,shelf cooking platform, and other similar situations, complete all as specified and directed.

S&F chequered cement concrete tile 300x300x25 mm thick, glossy finish / rubber moulded, set and jointed in neat cement slurry and pointed in grey cement & pigment laid over and including 20mm thick screed bed in cement mortar 1:6 including dismentling of old unserviceable floor finishes, complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed.

S&F in repairs high density polythene pipe 50mm dia (HDPE) of pressure rating 6kgf/cm² fixed complete to wall or floor including bend, tee, elbow etc., complete all as specified and directed.

S&F 15mm bore GI tubing "medium grade" galvanized incuding with all fittings and fixtures, fixed to walls / ceiling or laid under floors concealled or surface as required at site including taking down of old unserviceable existing GI tubing concealled or surface, complete all as specified and directed.

S & F in repair Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap including taking down of old unserviceable, complete all as specified and directed.

S&F in repairs vitreous china table top wash basin, silver Make - Jaquar cat ID- FNS-WHT-40931 (Or equivalent cat part from the makes as mentioned here-in-after) including CP waste coupling etc., complete all as specified and directed.

S&F in repairs Pillar Tap CP Make -Jaquar Cat ID- 5031 N (Or equivalent cat part from the makes as mentioned here-in-after), complete all as specified and directed.

S&F in repairs PVC connection pipe 450mm long as suitable with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer, complete all as specified and directed.

S&F in repair readymade pulley operated clothes drying system with and including of four aluminium pipes of existing dia and 2.80 m long each (4 pipe set), channel assembly, locking system ropes and all fixing materials complete all as specified and directed by Engr-in-charge Make - Easy Dry

Taking down chowkhat or frames n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window / Ceosetory windows & other Frames / Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite / borer proof, water / moisture proof and fire retardant, complete all as specified and directed by Engr-in-charge.

S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite /b orer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engr-in-charge.

M & L for Glass facade cleaning up to six storied with superior quality cleaning solution, removing all stain, dirt of all kind with rope access system or spider man techinique to access the glasses and claen the same including installation of high tensile m-12 size bolt and or EN 795 grade tested bolts, chemically anchored with ICFS CM 350 epoxy resin mortar to be used as secure anchor points for spider man ropes for glass cleaning etc complete as directed by Engr-in-Charge. Note: (i) Ladder / scaffolding arrengement or any other T&P required at site will be provided by the contractor without any extra cost to the Department. (ii). Any damage to existing panels / glasses during cleaning, the contractor will responsible for the same and he will replace the damaged panels / glasses without any extra cost to the Department. (iii) All safety measures / arrengement will be provided by the contractor to their labours / workers at his own cost and No labour will be deployed without Safety kits. Please also note that for any type of mishappening, the Department will not be held responsible. (iv) All consumable materials like degergent, cleaner, equipments etc. will be provided by the contractor at his own cost.

AN-ICON Engineering Technologies And Infrastructure Developments Pvt. Ltd

SARATH ENTERPRISES

Suma Construction

Agarwal Agencies

M/s.BAJRANG CONSTRUCTION

G M CONSTRUCTION COMPANY