Construction of class rooms and Repair works to KPS School, D. Palya village Gouribidanur Taluk,

Construction of class rooms and Repair works to KPS School, D. Palya village Gouribidanur Taluk,

Earth work in surface excavation by mechanical means for lowering &leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and tec...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

KSRB 2.8 : Providing and Filling in foundation with granite / trap broken metal 100mm. and down size, with approved sand including hand packing, ramming, watering, including cost of all materials and ...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) & with all lead and lift. and as per direction of the Engineer in charge of work...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in Cement Concrete for all Basement & surface level

works, return walls, retaining walls, sunken floors etc. The granite/trap/

basalt crushed graded coarse aggregates and fine agg...

Form Charges for Footing Charges & with all lead and lift. and as per direction of the Engineer in charge of work.

Form Charges for Columns& with all lead and lift. and as per direction of the Engineer in charge of work.

Form Charges for Plinth & with all lead and lift. and as per direction of the Engineer in charge of work.

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Form Charges for Columns & with all lead and lift. and as per direction of the Engineer in charge of work.

Form Charges for Lintel & Beam & with all lead and lift. and as per direction of the Engineer in charge of work.

Form Charges for chajja & with all lead and lift. and as per direction of the Engineer in charge of work.

Form Charges for Roof & with all lead and lift. and as per direction of the Engineer in charge of work.

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Providing & fixing of 2-track x 2panel sliding windows made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer)...

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth ...

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

Providing and fixing mosquito mesh to mesh to windows with 7.5 mm to 1.25 mm thick Honne wood petties including labour charges etc., complete. & with all lead and lift. and as per direction of the ...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Sl.No. 432, Code No. 0137 Enamel metal paint & with all lead and lift. and as per direction of the Engineer in charge of work.

Painter Class -1

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing wall black boards in CM 1:3 with two coats of black paint including finishing etc., complete & with all lead and lift. and as per direction of the Engineer in charge of work.

Anodised Aluminium butt hinges 100x75x4 mm & with all lead and lift. and as per direction of the Engineer in charge of work.

Oxidised mild steel tower bolt (barrel type) 250x10 mm & with all lead and lift. and as per direction of the Engineer in charge of work.

KSRB 8.6-7 : Providing and fixing on wall face un plasticised rigid PVC rain water pipes confirming to IS :13592Type A including joiting with seal ring confirming to IS :5382, leaving 10mm gap thermal...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

1'' Square tube 18 guage frame construction and two no's lockers instead one side and wooden top instead & with all lead and lift. and as per direction of the Engineer in charge of work.

PU handle I pipe with Powder Coated good quality bushes inside sheet back spring and absolutly with fabric & with all lead and lift. and as per direction of the Engineer in charge of ...

1'' Square tube 18 guage frame construction and two no's lockers instead one side and wooden top instead & with all lead and lift. and as per direction of the Engineer in charge of w...

School Desk 6 ft, CR pipe-25x25mm, bottom 16 guage pipe. Top 18 guage pipe, bottom pipe size 25x50mm CR pipe with back rest and pre laminated board 18mm with wood beading frame fully powder coated & w...

Supplying heavy gauge PVC conduit pipe mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before ...

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc135 x 75 x 65 mm & with all lea...

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.(200 x 200 x 65 mm & with all ...

Supplying and fixing PVC/metal conduit Deep junction box - 32 mm deep Junction box (Vol-6, Part-I, P.No. 1, I.No. 1.5.3) & with all lead and lift. and as per direction of the Engineer in charge of wo...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to I...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to I...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to I...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double bal...

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessar...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 32Amps & with all lead and lift. and as per direction of the Engineer in cha...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring us...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...

wiring for lighting / power circute using one of FRLS PVC insuleted 1100V grade , multistrand Copper conductor single core wire in open or concealed system of wiring as per IS 694-1990 & Confirming to...

wiring for lighting / power circute using one of FRLS PVC insuleted 1100V grade , multistrand Copper conductor single core wire in open or concealed system of wiring as per IS 694-1990 & Confirming to...

Supply and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws. Bolts nuts etc.., complete on the existing met...

Supply and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws. Bolts nuts etc.., complete on the existing met...

Supply and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws. Bolts nuts etc.., complete on the existing met...

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire...

Supplying and fixing 32mm dia Class A GI pipe bracket up to 2m long bent at suitable angle and fixing to this bracket lx40x2x40 watts fluoresecent tube street light fitting of all capacities to GI or...

Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate on 230 Volts, 50Hz AC supply & completely wired on existing box. & with all lead and lift. and as pe...

Fixing charges of post top/ Gate/ Garden fitting /LED on the existing CI / GI or any other pipe using required size of reducer, wiring using suitable wires. & with all lead and lift. and as per direc...

Supplying, fixing and wiring electronic Trivector Mtere (ETV) 5 to 32/63 Amps three phase 4 wire current class-1 Accuracy Energy Meter. & with all lead and lift. and as per direction of the Engine...

Dismantling weather proof course and removing and conveying the debris to a distance to the appropriate disposal area as per direction of Engineer-in-charge. & with all lead and lift. and as per dire...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scaffolding & scrapping of old paint and stain with wire brushes and cleaning of pa...

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Providing and fixing mosquito mesh to mesh to windows with 7.5 mm to 1.25 mm thick Honne wood petties including labour charges etc., complete. & with all lead and lift. and as per direction of the E...

Anodised Aluminium butt hinges 100x75x4 mm & with all lead and lift. and as per direction of the Engineer in charge of work.

Oxidised mild steel tower bolt (barrel type) 250x10 mm [P.No. A-29 Item No.583] & with all lead and lift. and as per direction of the Engineer in charge of work.

KSRB 8.6-7 : Providing and fixing on wall face un plasticised rigid PVC rain water pipes confirming to IS :13592Type A including joiting with seal ring confirming to IS :5382, leaving 10mm gap thermal...

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 m² and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white c...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...