Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.6 LAccepted-AOC C 92 JAIN NAGAR RAILWAY ROAD MEERUT UP | L1 | Accepted-AOC Found lowest and reasonable | |
| 2 | L2₹28.9 L+₹91,685 (3.28%)Rejected-Finance 7 2 S F ARIHANT ARCADE CENTRAL MARKET SHASTRI NAGAR MEERUT U P 250004 | MEERUT | MEERUT | UTTAR PRADESH | 250004 | L2 | Rejected-Finance In order But L2 | |
| 3 | L3₹29.7 L+₹1.7 L (6.19%)Rejected-Finance 10 RAJAN KUNJ ROORKEE ROAD MEERUT 250001 | MEERUT | UTTAR PRADESH | 250001 | L3 | Rejected-Finance In order But L3 | |
| 4 | L4₹29.9 L+₹1.9 L (6.78%)Rejected-Finance MIG 674 NEW HOUSING BOARD COLONY MORENA 476001 M P | MORENA | MORENA | MADHYA PRADESH | 476001 | L4 | Rejected-Finance In order But L4 | |
| 5 | L5₹32.0 L+₹4.0 L (14.4%)Rejected-Finance D 89 SHASTRI NAGAR MEERUT 250004 | MEERUT | UTTAR PRADESH | 250004 | L5 | Rejected-Finance In order But L5 |
Tender Value
Refer Docs
EMD Value
₹99,900
Closing Date
20 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(U) E/M Meerut
Roorkee Road Meerut Cantt
PROVN OF WALL TILLING UP TO 4 FEET HEIGHT FOR ICU, LAB, BTD, SURG. WARD, MED. WARD, EYE OPD , AND ENT OPD, ADDN/ ALTN OF PATIENT WAITING AREA FOR JCOS/OR INTO A CLOSED COMPLEX AT MDC AND SPECIAL REPAIRS TO PATIENT COOK HOUSE AT MH MEERUT UNDER GE(
2023_MES_597800_1
8521/E8
Open Tender
Civil Works
Item Rate
180 days
Meerut
please prefer tender documents
11 documents required · 11 mandatory
₹500
GE(U) E/M Meerut
₹99,900
Yes
15 Jul 2023
23 May 2023
22 Jun 2023
23 May 2023
20 Jun 2023
6 Jun 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises.
Taking down Chowkats or frames not exc. 1.5 Sqm each, with shutters (without taking off shutters from the frame).
Taking down Chowkats or frames exc. 1.5 Sqm and ,exc 4 Sqm each, with shutters (without taking off shutters from the frame).
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removing rubbish off the MD land all as specified and directed.
Demolition of reinforcement cement concrete (reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and removing rubbish off the MD land.
Demolition brickwork or stone work built in cement mortar including all quoins arches , pillers etc
Taking down cemet plaster including raking out joint hacking for key scrubbing down with water complete all as specified and directed.
M&L cement concrete type B1 1:2:4 ( 20 mm graded aggregate) as in slabs and in sheleves all as specified and directed
M&L mild TMT steel 10 mm dia and over , cut to length, bent to shape required , including cranking bending spirally for hooping for colums hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9 mm dia or securing with clips
M&L Mild steel 5 mm dia and over ,and over upto and including 10 mm dia in stirrups spacers and binders cut to length bent to shape required including cranking , bending sprially for hooping for columns hooking ends and binding with and including mild stell wire ( annealed ) not less than 0. mm dia or securing with clips
Use and waste of form work of suspended slabs such as roof slabs, floor slabs and similar work not exc 200 mm thick
Dismantling wrought iron or mild steel work of any description not other wise provided
Dismantling plain or corrugated asbestos cement ( corrugated semi-corrugated etc) sheets in roof covering
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / clading to wall fixed self tapping screwes/ J or L type cranked hook bolts complete
S&F MS work as in wind tie for roof including securing bolte etc complete all as specified and directed.
M&L for brick work with fly ash bricks ( old size) straight or curved in plan exc 6 m mean radius , built in CM 1:6 Complete all as specified and directed
M&L for applying 10 mm thick rendering using ready mix plaster bags on brick/ concrete surfaces of external walls finshed even and fair as per manufactures instruction complete all as specified.
M&L for applying 15 mm thick rendering using ready mix plaster bags in cm (1:6) on brick/ concrete surfaces of internal walls finshed even and fair as per manufactures instruction complete all as specified.
S&F aluminium glazed window shutters, Three track (each shutter approx. half the size of opening with two Nos. glazed shutter and 1 No. wire gauged shutter including necessary jointing cleats for fixing etc, glazing clips, rubber packing, aluminium anodised snap beading, screws, aluminium (anodised) fittings such as handle clips (suitable size), locking device, and glazing in panels with 5.0mm thick coloured/tinted glass and gauged with 0.36mm dia, 1.40mm aperture SS wire meshsing Jindal Aluminium Section Id 491, 4309, 4310, 8853, 8851, 9205 complete all as specified and shown in drg and as directed by Engineer-in-Charge. (In case of non-availability of any particular section, the higher section in terms of Kg/rm shall be provided without any extra cost to govt.
Supply only aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to +/- 5mm made out of standard aluminium moulded section of size 6mm x 7mm
S&F Steel windows/ventilator box type comprising of tubular frame and shutter made out of 1.25 mm thick MS steel tube factory made with double side shutters wire gauged shutter and glazed shutter (wire and glass panes shall bemeasured and paid separatly) with side hung shutters with steelhandle and steel peg stay dovetailed welded incl 2 nos tower bolts 150 mm long for ech leaf and including 8 mm square bar @ 10 CM c/c for grills/ guard bars spacing welded to FI frame work including other fittings handles, tower bolts and tarred hold fasts PCC blocks etc completeall as specified.
M&L for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate in sub base of floors etc complete all as specified and directed.
M&L 20-25mm thick machine cut Kota stone slab of size 550mmx550mm in flooring laid and jointed with grey) cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to give high gloss (mirror) finish complete over and including 15 mm thick screed bed in cm 1:6 all as specified
S& F pressed steel frames size 125X60mm for doors with one or more rebates including necessary fixinjg lugs hings lock strike plats complete as specified
S& F pressed steel frames size 106X60mm for doors with one or more rebates including necessary fixinjg lugs hings lock strike plats complete as specified
M&L cement concrete type B0 1:2:4 9( 12.5mm graded aggregate ) as filling in door frame compltete.
S&F 35 mm thick glazed and skelton shutters open rebated and prepared to recevie gauze etc ( with out sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitered beads for secruing glass etc, sizes of members of shutters as specified in SSR Part I section 8 clause 8.24 ( a) complete all as specified and directed.
S&F factory made shutters 30 mm thick pflush shutter , solid core construction wth block board core and pywood face panels, commercial type on both sides complete all as specified and directed.
M&L preparation of new surfaces of wooden /wood based materials of any description , not otherwise described ,over 10 cm width or girth and applying two coat with synthetic enamel paint over of one coat of pink primer including cleaning, stopping and rubbing down and removing all dropings complete all as specified and directed.
M&L preparation of new steel and iron surfaces of any description , not otherwise described ,over 10 cm width or girth and painting two coat of with synthetic enamel paint over of one coat of red oxide including cleaning, stopping and rubbing down and removing all drops , , dirts etc. complete all as specified.
S&F for 300mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cost aluminium alloy all as specified and directed.
S&F for 150mm size extruded aluminium alloy handles, fabricated type, anodised all as specified and directed.
S&F for aluminium, anodised barrel tower bolt of extruded section and fixed 150mm of size all as specified and directed.
S&F 150 mm overall length of cover plate floor dooe stopper of aluminium alloy body and tougue with hard drawn steel spring
S&F galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned track or galvanised wire staples to frame of shutter.
M&L light shade Vitrified Ceramic tiles double charge high glow 10 mm thick (square/ rectangular) polished, area of each tiles 600X1200 mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:6 complete all as specified and directed
M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick screed bed in cm 1:6 bed complete
S&F in repairs for bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for size 15mm bore.
S&Fin repairs stop valve 15 mm dia cast chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed.
S&F in repair PVC connection 450mm long with check nut for wash hand basin etc complete all as specified and directed.
S&F in repairs vitreous china wash basin, angle back, size 550x400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets
S&F in repairs for pillar taps of 15 mm bore, fancy type with capstan head, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe & fixed.
S&F of waste pipe of 32mm dia PVC pipe for WHB with long screwed shanks and fly nut flange end beddedd in red lead cement and other end fixed
S&F in repairs Aluminium anodised tubular towel rail 20mm dia D Type 60cm long between flanges
S&F in repairs for grating square 150mmx150mm size of PTMT
Taking up or down 15 mm dia steel tubing and connection incl cleaning for refixing of the following bore of pipe
Taking up or down 20 mm dia steel tubing and connection incl cleaning for refixing of the following bore of pipe
S&F 15 mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
Ditto but 20 mm dia of bore pipe
Dismantling of 100/110 cast iron, PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required all as directed by Engr-in-charge following bore of pipe
Dismantling of 75mm cast iron, PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required all as directed by Engr-in-charge following bore of pipe
S&F of 110mm dia PVC ultra drain,SelF it pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors
S&F of 75mm dia PVC ultra drain,SelF it pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors
S&F of PVC bend equal of any radius with door, ISI marked, IS-14735, jointed with solvent cement for 75mm size pipes.
S&F of PVC bend equal of any radius without door, ISI marked, IS-14735, jointed with solvent cement for 110mm size pipes.
S&F in repairs of PVC floor trap, plain with grating, diameter of outlet in 75mm including jointing to waste pipe fixed with solvent cement.
S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug,, coupling waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm and waste coupling and including 32 waste pipe complete
M&L Preparing new decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots Washing, rubbing down and stopping of distempered and painted surfaces over a coat of putty 1 mm thick applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior weather proof paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm using jet spray complete all as specified.
M&L preparation of new decorated distempered plastered/ umplastered surfaces of walls by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots, washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying two coat of distemper oil emulsion over one coat of putty 1 mm thick of any tint/shade complete all as specified.
M&L preparation of old decorated distempered plastered/ umplastered surfaces of ceiling by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots, washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying two coat of distemper oil emulsion over of one coat of putty 1 mm thick of any tint/shade complete all as specified.
M&L for taking of old water proofing membrane and cleaning the existing surfaces and removal of debris , loose particles , grass etc and existing water proofing roof treatment completely , existing plaster and repairing the cleaned surfaces through repair mortar and providing chemical injection grouting and angle filets ( if required ) and treatment of pipe entry with hybird PU sealant dual shrinkage compensated micro conrete. Applying priming coat of epoxy primer with resin hardner in 1:1 ratio with water dilution as per manufacturerinstructions applying 2 coats of solvent based polyrethane liquid membrane not less than 500 micron thick UV having SRI valve greater than eual to 105 with consumption of 0.61 kg/sm ( each coat), 2nd coat shuld be applied once 1st coat becomes dry completely including 10 mm thick cement plaster in cm 1:4 and all as specified and directed Make : Asian Paints /Thermax/Berger
Excavation in trenches n,exc 1.5m wide and n,exc 1.5m in depth for foundation etc or for shafts wells cesspits manhole etc n,exc 10sqm on plan and n,exc m in depth and getting out in soft/loose soil
M&L cement concrete type D-2 1:4:8 (40mm graded aggregate) as in foundation filling and mass concrete
Returning filling in, including spreading, leveling, watering and well ramming in layers n;exc 25 cm
Removing excavated material n ;exc 50 m and depositing where directed at a level n;exc 1.5 m above the starting point
M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall finished over and smooth without using extra cement in cm 1:4 complete.
S&F aluminium anodized double / single leaf hung glazed door with frame using with aluminium extruded section of make Jindal, Hind or Hindalco box section of size 63.50mm x38.10, for side rail 85 mm x44.45mm for top rails and midle rails 83.50mmx44.45mm for top rails 100mmx44.45 mm thickness of aluminium sheet 1.25 mm with 15 micron anodizing and glazing with and including 5 mm thick tinyed glass of slected quality, fixed with aluminium anodized triangular glazing beading with U rubber linings including T brush linings for side rails glaging clips etc with and including provision of hydroulic door closer ( 01 for each shutter ) floor door stopper ( 01 no for each shutter)stainless steel hinges of 125mm size 125 mm size ( 03 No of each shutter ) 6 lever Mortice lock ( 01 for each door) aluminium anodized fany type handle of suitable size ( 02 No for each shutter) aluminium anodized tower bolys of extruded section of 200 mm long ( 02 No for each shutter ) complete all as specified and directed Note :- fixing shall be of same colour powder coated PVC protected sheeting shall be used while fixing the frame of doors windows etc to avoid damage scrathes etc
M&L perforated particle board/ tiles for E board false ceiling 60X60 cm in size fixed with on frame work or with staple on snap grid as in ceiling flat or sloping all as specified and directed. Make : everest /Armstrong /Saint Gobin/ Diomond international inex Pvt Ltd
M&L Providing and fixing anodised aluminium partition fixed type without sash bars aluminium section weighing 0.55 kg/m including necessary , jointing cleats clips rubber packing anodised snap beading screws etc complete asll as specified
S&F fix sheet glass ordinary quality and glazing 5.5 mm thick n.exc 0.50sqm with neaparne rubber beading complete all as specified and admitted.
M&L nominal mix reinforcement cement concrete 1:2:4 type B1 ( 20 mm graded aggregate as in lintle beams etc complete all as specified and admitted.
Use and waste of form work to sides and sofites of floor or roof beams hunchings and lintel centilerver rough finished surfaces of concrete
M&L for glazed digital ceramic coloured tiles double charged (Ist quality) in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in CM 1:4 all as specified and directed.
M&L preparation complete removal existing treatment of old plastered /unplastered surfaces of walls and applying 1 mm thick Wall care white ( Putty) and sand papering surfaces to achieve smooth surfaces and applying distempering with distemper oil emulsion , two coats, white or tinted over a coat of alkaline resisant primer using roller including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .
Taking down carefully copper/ aluminium point wiring of any type, batten or conduit, (Light, Fan, Socket or power) complete incl fittings and making good the disturbed surfaces of walls, ceiling etc in cm and applying two coats of white/colour washing/distempering etc to match the existing surface complete all as directed by Engineer - in- Charge.
Material & labour point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc,alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size through and including PVC conduit terminated in modular switch boards including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing for the following. [Note: - Modular switch boards shall be measured and paid separately rate for cutting chasis of walls all are included in the quated rate)
One light point or one fan point or bell point controlled by one switch or bell push
One 3 pin, 05 /06 Amps socket outlet point on independent board controlled by one , one way 05/06 Amps switch
One 3 Pin, 05 /06 Amps socket outlet point on same board controlled by one, one way 5/06 Amps switch
All as per serial item No 79 here in before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 /16 Amps socket outlet point on independent board with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed
S & F Modular Switch 1 way 6 A, 1 module
S & F Modular Switch 1 way 16 A, 1 module
S & F Modular Socket 6 A, 2/3 pin combined 2 module
S & F Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module
S & F Modular Fan step regulator, 120 watt, 2 module
S & F Modular type White cover plate with frame 2 module
S & F Modular type White cover plate with frame 3 module
S & F Modular type White cover plate with frame 4 module
S & F Modular type White cover plate with frame 6 module
S & F Modular type White cover plate with frame 8 module
S & F Modular type Metal Flush box 1/2 module
S & F Modular type Metal Flush box 3 module
S & F Modular type Metal Flush box 4 module
S & F Modular type Metal Flush box 6 module
S & F Modular type Metal Flush box 8 module
Supply & fixing in replacement of ceiling rose surface bakelite 65x 50mm three terminals complete all as specified & directed.
S&F in replacement 20 watts Light emitting Diode (LED) tube light fitting wall mounting , indoor decorative aluminium box type , AC 220 V, 50 hz, with driver, 4' long, easy to install Efficacy : 100 lumen/watt, making connections with and including 23/.0076 flexible cord of required length from ceiling rose to connector complete all as specified and directed.
S & F Recess mounted economical LED panel light 2`X2` 36 watt with high quality diffuser for uniform light with 100 lm/w LED luminaires with inbuilt PIR occupancy sensor provided in lumanaire for switching as per the movement pf person. LED lumainaire made in CRCA sheet metal with wider light window and opal polystyrene diffuser for spotless glare-free uniform lighting complete all as specified and directed.
S&F in replacement LED Bulk Head Fitting 10 Watt housing made up corrosion resistant unbreakable PC with high quality diffuser for glare free Aesthetically designed gaskit IP65 protection 100 lm/watt complete all as directed.
Supply & fixing in replacement lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting complete all as specified & directed
M & L in replacement for sub main wiring with 4 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor stranded cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core , PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed including taking out old u/s sub main wiring any size.
M & L in replacement for sub main wiring with 6 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor stranded cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core , PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed including taking out old u/s sub main wiring any size.
M & L in replacement for sub main wiring with 10 Sqmm nominal cross sectional area, 4 single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor stranded cable with and including continuous earth wire of size 10.0 Sqmm nominal cross sectional area, single core , PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed including taking out old u/s sub main wiring any size.
Supply and fixing in replacement 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.
Supply & fixing in replacement MCB, SPN, AC, 240 volts of 40 Amps capacity 10KA, ''B" series and making connections with suitable size of copper lugs complete all as specified & directed
Supply & fixing in replacement MCB, SPN, AC, 240 volts of 63 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed
Supply & fixing in replacement MCB, TPN, 415 volts of 63 Amps capacity 10KA, 'c' series and making connections with suitable size of copper lugs complete all as specified & directed
Supply & fixing in replacement MCB DB Box 8 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed including taking out old u/s DBs any capacity.
Supply & fixing MCB DB Box 4 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed including taking out old u/s DBs any capacity. Make;- Havells/C&S /Legrand
Supply & fixing in replacement Vertical TPN distribution board with provision of 63 Amp MCB TPN as incomer with necessary internal wiring, IP 54 Protection, MCBs as outgoing , 4 way, 415 Volt, Double door for housing MCB's/Isolators and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed including taking out old u/s DBs any capacity complete all as specified and directed by the Engr-in-Charge..
S&F in replacement MCCB Enclosure for fixing 4 pole MCCB 4Pole 415 V, 16 KA capacity MCCB fixed fixed type complete al as specified and directed
S&F in replacement MCCB 4 Pole .415 V. fixed type,100 Amps with breaking capacity 16KA complete al as specified and directed
Supply & fixing in replacement Sheet Metal Enclosures with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps capacity 240 volts 'B' series 10KA and making connections complete all as specified & directed including taking out old u/s any capacity.
Earthing complete with galvanised MS earth plate of size 600 x 600 x 6mm thick burried directly in ground not less than 2.25 Mtr below ground level, earth plate paced on all side with charcoal mixed with salt to a thickness of 150 mm in layers, connected by GI earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion (GI earth strip will be protected by using 40mm bore GI pipe (light grade) from test point to main board. The earthing includes PCC pit chamber, RCC pit cover and frame, watering pipe 20mm bore, funnel with wire mess with necessary earth work including disposal of surplus soil to a distance not less than 50 Mtr etc complete all as specified and shown in electrical plate No 3 of SSR Part-I.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V,size 1400mm with Min Air delivery 245 CFM and service value 6.0 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450 mm sweep heavy duty with, blades, and frame and louvers incl cutting of wall and installation complete all as specified and directed.
Supply & fixing MCB , SP, AC, 240 volts of 05 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed. Make;- Havells/C&S /Legrand
Supply & fixing MCB TPN, 415 volts of 100 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.Make;- Havells/C&S /Legrand
Supply and fixing 100 Amp 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.
Supply and fixing 63 Amp 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.
Supply and fix room window type air conditioner Hot and Cold electric driven (single phase), cooling capacity 4500 K Cal per hour (1.5 Ton).BEE 5 star rated complete all as specified and directed.
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA complete all as specified and directed.
Supplying, fixing including connecting and testing of energy saving & environment friendly LED street light made out of pressure die cast anodised aluminium with toughened glass cover housing, 45 watts LED to achieve electrical safety class 1, CRI>70 colour temperature 5000k to 6000k with LED working life time >50000 burning hours with integrated constant current electronic driver, nominal volatge 240V, AC,50 Hz, operating voltage range 120-280V, suitable for ambient environmental condition of station, TDH<10%,, Pf >0.95, lumens >80 lm/W, Ingress protection not less than IP65, driver and luminaire shall comply not less than LM-79 or IS 16106 of 2012 including 32mm nominal bore light grade GI pipe brackets made out of 1.50M long GI pipe ,bent to shape and fixed to poles/ walls with Two Nos mild steel flat iron brackets of 40mmx6mm, comprisng 4 Nos mild steel hexogonal head bolts of 12 mm dia, 75 mm long with washers duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, and making connections with cable complete all as specified and directed
AEGIS INTERNATIONAL
SA construction co.
YADAV CONSTRUCTION COMPANY
mohanlal gupta
AR Enterprises
M/S AGARWAL CONSTRUCTION CO.
BHAGWAN DAS & Co
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .