REPAIR TO VARIOUS TYPE OF STEEL FURNITURE EXCEPT BED AND CHARPOY INCLUDING PAINTING AT NAGROTA AND REPAIRS TO VARIOUS TYPES OF STEEL AND WOODEN FURNITURE OF SILA GARRISON REASI UNDER GE NAGROTA

Amount

SCHEDULE -A PART-I(REPAIRS TO FURNITURE AT NAGROTA) A) Removal of existing unserviceable/broken wooden/steel/PVC part from furniture article carefully without disturbing the adjoining parts.Supply and fixing new parts as per given specification and drg after tightening the joints by arc/gas welding making every part in-tact including painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge.All furniture items is to be painted only after making the entire item intact by tightening the joints. B). Work will be executed inside Barrack Store yard of GE(Nagrota) and at various sites as per requirement. C). All steel sections shall be as per standard IS . D). Plywood/MDF shall be BWR grade-A /exterior grade of approved make/brand and shall confirm to IS-303. E). All other material to be incorporate in the work shall be of latest IS standard specification. F). Anti-termite and anti-bug treatment shall be done before polishing the wooden item. G). Painting shall only be done with spray machine only. H). Painting will only be caried out after removing/peeling the existing paint by using paint remover.

ALMIRAH LARGE STEEL, FD-67(M)/ 1031:-

Removing UNSV door shutter carefully by unriveting the hinges, S&F new door shutter made of 1 mm thick MS sheet of same size and shape duly fixed to almirah large steel with new 80mm long MS hinge. Complete all as directed and shown on drawing.

Removing UNSV lock from shutters of almirah large steel; S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.

Removing UNSV handle from almirah steel large, S&F new 130mm long chromium plated handle to steel shutters, Complete all as directed and shown on drawing.

Removing UNSV/damaged shelf carefully by removing the rivets and welding spots, S&F new shelf made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing UNSV/damaged bottom portion carefully by removing rivets and welding spots and S&F new bottom made of 1 mm thick MS sheet of same size and shape by welding . Complete all as directed and shown on drawing.

Removing UNSV leg from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts.S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting.Complete all as directed and shown on drawing.

Spot gas welding

Completely removing all dents from almirah by smooth hammering, preparing the almirah by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete almirah as per approved colour/shade by Engr-in Charge/GE after application of red oxide primer. The painting to each article shall only be carried out by spray machine only.

ALMIRAH LARGE STEEL,FD/E6/MAP/18 :-

Removing UNSV door shutter carefully by unriveting the hinges, S&F new door shutter made of 1 mm thick MS sheet of same size and shape duly fixed to almirah large steel with new 80mm long MS hinge. Complete all as directed and shown on drawing.

Removing UNSV lock from shutters of almirah large steel; S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.

Removing UNSV handle from the almirah steel large, S&F new 130mm long chromium plated handle to steel shutters ,Complete all as directed and shown on drawing

Removing UNSV lock from internal safe of almirah large steel; S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.

Removing UNSV/damaged bottom portion carefully by removing rivets and welding spots and S&F new bottom made of 1 mm thick MS sheet of same size and shape by welding. Complete all as directed and shown on drawing.

Removing UNSV leg from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts.S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting.Complete all as directed and shown on drawing.

Spot gas welding

Completely removing all dents from almirah by smooth hammering ,preparing the almirah by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete almirah as per approved colour/shade by Engr-in Charge/GE after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

ALMIRAH STEEL MEDIUM WITH SHELVES,FD-67(M)/1032

Removing UNSV door shutter carefully by unriveting the hinges, S&F new door shutter made of 1 mm thick MS sheet of same size and shape duly fixed to almirah steel Medium with new 80mm long MS hinge. Complete all as directed and shown on drawing.

Removing UNSV lock from shutters of almirah steel Medium S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing. Make of Locks-Godrej/Harrison/Link

Removing UNSV handle from the almirah steel Medium, S&F new 130mm long chromium plated handle to steel shutters ,Complete all as directed and shown on drawing

Removing UNSV/damaged shelf carefully by removing the rivets and welding spots, S&F new shelf made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing UNSV/damaged bottom portion carefully by removing rivets and welding spots and S&F new bottom made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing UNSV leg from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts.S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting.Complete all as directed and shown on drawing.

Spot gas welding

Completely removing all dents from almirah by smooth hammering ,preparing the almirah by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete almirah as per approved colour/shade by Engr-in Charge/GE after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

BOOK CASE STEEL GLAZED , FD-1028:-

Removing UNSV lock from shutters of book case steel, S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.

Removing UNSV handle from book case steel ,S&F new 130mm long chromium plated handle to each openable shutter ,Complete all as directed and shown on drawing

Removing UNSV/damaged shelf carefully by removing the rivets and welding spots, S&F new shelf made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing UNSV/damaged bottom portion carefully by removing rivets and welding spots and S&F new bottom made of 1 mm thick MS sheet of same size and shape by welding . Complete all as directed and shown on drawing.

Removing UNSV leg from bottom of book case steel carefully by unriveting and using hand held cutting machine without damaging the other parts. S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting.Complete all as directed and shown on drawing.

Completely removing all dents from book case by smooth hammering ,preparing the book case by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete book case as per approved colour/shade by Engr-in Charge/GE after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

CHAIR COMPUTER, FD/E6/MAP/01 / PCH-7001D /TP:-

Removing the existing torn out tapestry cloth, pressed foam cushion,elastic webbing tape,PVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully. S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than 200 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film.Complete all as specified and as directed.

Removing the existing torn out tapsetry cloth from seat and back of chair carefully after removing the PVC lipping. S&F new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than 200 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker and complete seat and back shall be covered with transparent polythene wrap. Complete all as specified and as directed.

Removing old unserviceable arm rest of chair and S&F new arm of same shape and size , made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr-in-Charge.

Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair computer all as directed

Removing unserviceable 5 spokes stainless steel adjustable pedestal assembly, S&F new 5 spokes stainless steel adjustable pedestal assembly to chair computer all as specified and directed by Engr -in charge.

Removing unserviceable hydraulic gas lift cylinder of chair, S&F new hydraulic gas lift cylinder to chair.Complete all as directed and shown on drawing.

Painting to all steel portion of chair computer with one coat of chrome paint or as directed by Engr-in-Charge after cleaning, dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth.

CHAIR WRITING ,FD/E6/MAP/12:-

Removing the existing torn out tapestry cloth, pressed foam cushion,elastic webbing tape, PVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully. S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than 200 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film.Complete all as specified and as directed.

Removing the existing torn out tapsetry cloth from seat and back of chair carefully after removing the PVC lipping.S&F new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than 200 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.Complete all as specified and as directed.

Removing old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge.

Painting to all steel portion of chair writing with one coat of synthetic enamel black paint or as directed by Engr-in-Charge after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth.

CHAIR EXECUTIVE REVOLVING/ CONFERENCE,TP:-

Removing the existing torn out tapestry cloth, pressed foam cushion,elastic webbing tape, PVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully.S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than 200 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film. Complete all as specified and as directed.

Removing the existing torn out tapsetry cloth from seat and back of chair carefully after removing the PVC lipping.S&F new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than 200 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.Complete all as specified and as directed.

Removing old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge.

Painting to all steel portion of chair with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth.Complete all as directed and shown on drawing.

LOCKER STEEL, FD-257/1029:-

Removing UNSV/damaged door shutter carefully by removing the hinges and S&F new shutter made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing UNSV/damaged shelf carefully by removing the rivets and welding spots and S&F new shlef made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing the existing unserviceable rusted conduit pipe from the side flanges ,S&F new 20mm dia conduit pipe along with side flanges. Complete all as directed and shown on drawing.

Removing UNSV handle from both shutters of locker steel and S&F new 100mm long chromium plated steel handle of ISI marked with riveting to both steel shutters ,Complete all as directed and shown on drawing.

Removing the existing unserviceable hasp and staple from locker steel and S&F new hasp and staple of size 75mmx40mm of 3mm thickness with riveting to steel shutters. Complete all as directed and shown on drawing.

Removing UNSV leg from bottom of lockers carefully by unriveting and using hand held cutting machine without damaging the other parts.S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting. Complete all as directed and shown on drawing.

Continous gas welding to all broken joints of table in length of 1 cm

Completely removing all dents from locker by smooth hammering ,preparing the locker by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete locker as per approved colour/shade by Engr-in Charge/GE after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

RACK SHOE STEEL, FD/E6/MAP/02(R) :-

Removing the existing damaged/rusted legs (U shaped) carefully without damaging the other parts by using hand held cutting machine, S&F new legs (U shaped) made out 25mm dia MS pipe 18 gauge duly welded to its position.Complete all as directed and shown on drawing.

Removing UNSV wire mesh (Jali) shelves, S&F new wire mesh (Jali) shelves made out of 3mm dia MS rods duly welded to its position.Complete all as directed and shown on drawing.

Removing old UNSV shoes, Supply and fix new PVC shoe suitable to each leg .Complete all as directed and as shown on drawing.

Continous gas welding to all broken joints of table in length of 1 cm

Completely removing all dents from rack shoe by smooth hammering ,preparing the rack shoe by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete rack shoe after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

TABLE OFFICE OFFICER STEEL, FD-1003:-

Removing UNSV top ; S&F new top of size 1680mmx870mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around duly fixed with adhesive and headless nails . Complete all as directed and shown on drawing.

Removing the existing unservicable /rusted drawer ; S&F new drawer made of 1mm MS sheet as per size and dimension with 100 mm long chrome plated handle fixed at front.. Complete all as directed and shown on drawing.

Removing UNSV lock from drawers and shutters ; S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing the old broken PVC shoes from the legs of table, S&F new PVC shoes of size 25mmx25mm having metal washers fitted inside at bottom.

Continous gas welding to all broken joints of table in length of 1 cms

Completely removing all dents from table by smooth hammering ,preparing the table by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete table as per approved colour/shade by Engr-in Charge/GE after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

TABLE OFFICE CLERK STEEL,FD-84(M)/1004 :-

Removing UNSV top carefully; S&F new top of size 1200mmx610mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing the existing unservicable /rusted drawer; S&F new drawer made of 1mm MS sheet as per size and dimension with 100 mm long chrome plated handle fixed at front.. Complete all as directed and shown on drawing.

Removing UNSV lock from drawers and shutter; S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing the old broken PVC shoes from the legs of table, S&F new PVC shoes of size 25mmx25mm having metal washers fitted inside at bottom.

Continous gas welding to all broken joints of table in length of 1 cm

Completely removing all dents from table by smooth hammering ,preparing the table by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete table as per approved colour/shade by Engr-in Charge/GE after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

TABLE STEEL 900X900X760MM, FD-1009:-

Removing UNSV top from table steel carefully;S&F new top of size 900mmx900mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing UNSV leg from the table steel carefully by cutting the welded ends with hand held machine and S&F new leg made of MS Square tube 25mmx25mm of wall thickness 1.6mm by welding to the exact place and position,The welded surface shall also be grinded to make the spots and surface smooth.

Removing UNSV top rail from the table carefully by cutting the welded ends with hand held machine and supply and fix new rail made of MS Square tube 25mmx25mm of wall thickness 1.6mm by welding to the exact place and position,The welded surface shall also be grinded to make the spots and surface smooth.

Supply and fix new PVC shoe suitable to leg after removing UNSV shoe complete all as specified, as directed and as shown on drawing.

Completely removing all dents from table by smooth hammering ,preparing the table by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete table as per approved colour/shade by Engr-in Charge/GE after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

TEAPOY VERANDAH, FD-35/255:-

Removing UNSV top from teapoy verandah carefully;S&F new top of size 900mmx450mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing old UNSV shoes, Supply and fix new PVC shoe suitable to each leg. Complete all as directed and as shown on drawing.

S&F long stiffener of length 750mm of conduit pipe of 20mm dia of wall thickness 1.6mm welded in between the short siffeners at bottom of teapoy,irrespective of what is shown in drg

S&F short stiffener of length 350mm of conduit pipe of 20mm dia of wall thickness 1.6mm welded in between the legs of teapoy,irrespective of what is shown in drg

Completely removing all dents from teapoy by smooth hammering ,preparing the teapoy by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete teapoy after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

TEAPOY VERANDAH, FD/E6/MAP/17:-

Removing UNSV top from teapoy carefully;S&F new top of size 750mmx450mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing old UNSV shoes,Supply and fix new PVC shoe suitable to each leg .complete all as directed and as shown on drawing.

Completely removing all dents from teapoy by smooth hammering ,preparing the teapoy by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete teapoy after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

TABLE 3'X2' WITH DRAWER STEEL, FD-1008 :-

Removing UNSV top from table steel carefully;S&F new top of size 900mmx600mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing UNSV leg from the table steel carefully by cutting the welded ends with hand held machine and S&F new leg made of MS Square tube 25mmx25mm of wall thickness 1.6mm by welding to the exact place and position,The welded surface shall also be grinded to make the spots and surface smooth.

Removing the existing unservicable /rusted drawer ; S&F new drawer made of 1mm MS sheet as per size and dimension with 100 mm long chrome plated handle fixed at front.. Complete all as directed and shown on drawing.

Removing UNSV lock from drawers and shutters ; S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing the old broken PVC shoes from the legs of table,S&F new PVC shoes of size 25mmx25mm having metal washers fitted inside at bottom.

Continous gas welding to all broken joints of table in length of 1 cms

Completely removing all dents from table by smooth hammering ,preparing the table by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete table as per approved colour/shade by Engr-in Charge/GE after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

TABLE 3'X2' WITHOUT DRAWER STEEL, FD-1007:-

Removing UNSV top from table steel carefully;S&F new top of size 900mmx600mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing UNSV leg from the table steel carefully by cutting the welded ends with hand held machine and S&F new leg made of MS Square tube 25mmx25mm of wall thickness 1.6mm by welding to the exact place and position,The welded surface shall also be grinded to make the spots and surface smooth.

Removing UNSV lock from drawers and shutters ;S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing the old broken PVC shoes from the legs of table,S&F new PVC shoes of size 25mmx25mm having metal washers fitted inside at bottom.

Continous gas welding to all broken joints of table in length of 1 cms

Completely removing all dents from table by smooth hammering ,preparing the table by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete table as per approved colour/shade by Engr-in Charge/GE after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

TABLE DINING FOR OR'S STEEL, FD-165(M) :-

Removing UNSV top from table dining OR's steel carefully;S&F new top of size 1900x685mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing old UNSV shoes,Supply and fix new PVC shoe suitable to each leg .complete all as directed and as shown on drawing.

Completely removing all dents from table by smooth hammering ,preparing the book case by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete table as per approved colour/shade by Engr-in Charge/GE after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

TABLE BED SIDE (MAP), FD/E6/MAP/15® :-

S/F new top with teak wood beading made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood beading at all edges. Complete all as specified and as shown on drawing

S/F new sides with teak wood beading made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thickteak wood beading at all edges. Complete all as specified and as shown on drawing

S/F new Upper drawer made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade with bottom of 6mm BWR plywood including 4mm thick teak wood beading at all edges.Complete all as specified and as shown on drawing

S/F new Back ply 6mm BWR.

S/F new lower drawer made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade with bottom of 6mm BWR plywood including 4mm thick teak wood beading at all edges. Complete all as specified and as shown on drawing

S/F new top upper back made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood beading at all edges. Complete all as specified and as shown on drawing

S/F new handles 75mm long chrome plated of dia 8mm fixed with suitable screws.

Painting to steel frame of table bed side steel with one coat of synthetic enamel black paint after cleaning,dusting and scratching the iron surface with sand emery paper.

TABLE COMPUTER, FD/E6/MAP/03:-

Removing UNSV top from table steel carefully;S&F new top of size 900mmx560mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing the existing unservicable key board of table computer by removing the unsv telescopic channel.supply and fix key board attached with new telescopic channel made out of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing the existing unservicable mouse pad board complete from Table computer and supply and fix new mouse tray18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing the existing unservicable CPU stand part complete from Table computer and supply and fix new CPU stand made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing UNSV/damaged drawer complete from Table computer and supply and fix new drawer made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails.The drawer shall be provided with decorative knob. Complete all as directed and shown on drawing.

Painting to steel frame of table computer with one coat of synthetic enamel paint of existing color after cleaning,dusting and scratching the iron surface with sand emery paper.

CHAIR CB STEEL TUBULAR WITH ARM, FD-75(M):-

Scratching the entire frame of chair and applying one coat of synthetic enamel paint as per approved colour/shade by Engr-in Charge/GE after preparation of surfaces by removing the old paint with sand emery paper. Complete all as specified and as directed by Engr-in-Charge

Remvoing the old unserviceable/broken MS flat,supply and fixing MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat.

Removing the old unserviceable seat from the frame of the chair. Supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

Removing the old unserviceable back from the frame of the chair. Supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

Removing the old unserviceable arm,supply and fixing new arm of 1st class teak wood in natural shade as per drg.

Removing the old unserviceable hard rubber toes,supply and fixing new Hard rubber shoes to the bottom frame of chair as per drg.

Removing the old unserviceable rubber caps and supply and fixing new rubber caps on the top of rear legs as per drg.

CHAIR CB STEEL TUBULAR WITHOUT ARM, FD-75(M):-

Scratching the entire frame of chair and applying one coat of synthetic enamel paint as per approved colour/shade by Engr-in Charge/GE after preparation of surfaces by removing the old paint with sand emery paper. Complete all as specified and as directed by Engr-in-Charge

Removing the old unserviceable and broken MS flat and supply and fixing MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat.

Removing the old unserviceable seat from the frame of the chair. Supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

Removing the old unserviceable back from the frame of the chair. Supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

Removing the old unserviceable hard rubber toes,supply and fixing new Hard rubber shoes to the bottom frame of chair as per drg.

Removing the old unserviceable rubber caps and supply and fixing new rubber caps on the top of rear legs as per drg.

CHAIR SCHOOL WITH HAND BOARD, FD/E6/MAP/05:-

Removing UNSV / broken hand board of Chair school with hand board and supply and fix new hand board made out of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade with 4mm teak wood edging all around the hand board.Complete all as directed and shown on drawing.

Removing UNSV one piece PVC seat and back and supply and fix new one piece seat and back to Chair school with hand board.Complete all as directed and shown on drawing. Make of one piece seat and back : Nilkamal/Supreme/Cello/AMKO/Blow plast.

Removing the existing foot rest wire mesh of chair school and S & F the same with new one duly welded to match with existing complete all as specified, as directed and as shown on drawing.

Removing old UNSV shoes,Supply and fix new PVC shoe suitable to each leg .complete all as directed and as shown on drawing.

Painting to all steel portion of chair with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth. Complete all as directed and shown on drawing.

SCHEDULE -A PART-II (REPAIRS TO FURNITURE AT REASI) Removing the mentioned unserviceable/broken components of wooden furniture without damaging the adjacent parts.Supply and fixing following new component duly as per mentioned size and shape shown on drg in the existing place with standard workmanship to make the item complete in all manner.The work shall be executed in BS Yard or at any site/unit as directed by GE/Engr-in-Charge:-

REPAIR TO BED PLY WOOD TOP (FD-246):-

Removing of old unserviceable long rail,supply and fixing new long rail; made of teak wood ,fitted to footboard and head board by tongue and groove joint using adhesive and nails. complete all as shown on drawing and as specified .

Removing of old unserviceable headboard,supply and fixing new head board, made of teak wood battens,teak wood legs,teak wood rails including 4mm thick teak ply on both sides with 12mm dia half cut beading. complete all as shown on drawing and as specified .

Removing unserviceable 4mm thick teak ply from headboard including 12 mm dia half cut teak wood beading ,supply and fixing new 4mm thick teak ply in position duly fixed with adhesive and headless nails with all edges completely covered with 12 mm dia half cut teak wood beading by using adhesive and headless nails,complete all as shown on drawing and as specified .

Removing of old unserviceable footboard,supply and fixing new footboard ,made of teak wood battens,teak wood legs,teak wood rails including 4mm thick teak ply on both sides with 12mm dia half cut beading. complete all as shown on drawing and as specified .

Removing of old unserviceable 4mm thick teak ply from footboard including 12 mm dia half cut teak wood beading ,supply and fixing new 4mm thick teak ply in position duly fixed with adhesive and headless nails with all edges completely covered with 12 mm dia half cut teak wood beading by using adhesive and headless nails,complete all as shown on drawing and as specified .

Removing of old unserviceable Stiffners,supply and fixing new stiffeners of size 900mmx40mmx60mm made of 1st class teak wood ,complete all as shown on drg and as specified

Removing of old unserviceable leg from head board .Supply and fixing new leg made to shape and size 660mmx60mmx60mm,Complete all as directed and shown on drg.

Removing of old unserviceable leg from foot board.Supply and fixing new leg made to shape and size 500mmx60mmx60mm,Complete all as directed and shown on drg.

Removing of old unserviceable ply top,supply and fixing in position with new top of 12mm thick plywood BWR grade-A Archid/Century/Greenply conforming to IS-303 of size 1980mmx900mm with 12 x Nos of 40mm long countersunk wood screw.complete all as specified and as directed. Make- Archid/Century/Greenply

Removing of old unserviceable wooden bracket,Supply and fixing in position new wooden corner bracket of size 100mm x 100mm of thickness duly fixed with adhesive and countersunk wood screw.

Polishing to bed ply top with french polish of approved grade and brand by spray machine only after cleaning, dusting and scratching the entire wooden suface with sand emery paper of required grade and hand held grinder, filling putty to the bore holes, making the surface smooth by sanding and grinding with standard workmanship all as directed by Engineer-in-charge and as specified. The polishing shall be carried out after making the article intact by tightening all parts and carrying out anti termite and anti bug treatment all as specified and as directed.

REPAIR TO BED PLY STEEL TOP (FD/E6/MAP/08®:-

Removing of old unserviceable PVC Shoes,Supply and fixing new High quality hard PVC shoes of size 38mm x 38mm,Complete all as specified and showin in drg.

Removing of old unserviceable prelaminated MDF board from head board ,Supply and fixing in position with new cut piece at head board of size 638mm x 201mm made of 18mm thick prelaminated MDF board with 2mm thick PVC beading alround its edges duly fixed with suitable wooden screw.complete all as specified and shown on drg.

Removing of old unserviceable prelaminated MDF board from foot board,Supply and fixing in position with new cut piece at foot board of size 638mmx314mm made of 18mm thick prelaminated MDF board with 2mm thick PVC beading alround its edges duly fixed with suitable wooden screw .complete all as specified and shown on drg.

Removing of old unserviceable ply top,Supply and fixing in position with new top of 12mm thick Plywood BWR grade - A with company hologram conforming to IS-303 of size 1974mm x 824mm duly fixed with 12 x Nos of 50mm long 8mm dia flat head nut , bolts and washers. complete all as specified and shown on drg. Make- Archid/Century/Greenply

Painting the frame of the Bed Ply Top Steel with one coat of dark Grey hammer tone paint with spray machine of approved quality after preparation of steel surface by sanding with sand emery paper and dusting the surface with clean cloth. The Bed Ply Top Steel frame shall be made smooth by applying metal putty on etched surface only where required

CHARPOY GI PIPE WITH PLY TOP,FD-220/220(R):-

Taking out existing unserviceable /broken plywood from the charpoy GI pipe by unscrewing nut,bolt ,washer and flat iron. Tightening each part of the entire frame of charpoy by using pipe wrench and Supply and fixing new 12mm thick plywood BWR grade-A with company hologram made of wood and other lignocellulosic products conforming to IS-303 of size 1980mm x 900mm fixed over the GI pipe frame and fixing 3 components(i.e- ply ,flat iron and rail ) with new GI nylon insert nut, bolt and washers 8mm dia 70 to 75mm long as directed by Engr-in Charge and all as specified.

Removing existing unserviceable/broken three way 32mm dia GI Elbow from charpoy GI Pipe by unscrewing.. Supply and fixing new three way GI Elbow for 32 mm internal dia GI pipe duly ISI marked.complete all as specified and shown on drawing. Make-UNIK / KIRTI / NEW.

Removing existing unserviceable/broken 32mm dia GI checknut from charpoy GI Pipe by unscrewing . Supply and fixing new GI checknut for 32mm internal dia GI pipe having thickness not less than 13mm ISI marked.complete all as specified and shown on drawing. Make-UNIK / KIRTI / NEW.

CHARPOY FOLDING IP HARD TOP, FD-388[R]

Removing of old unserviceable top by unscrewing ,Supply and fixing new top made of 8mm thick BWR Plywood grade-A with company hologram conforming to IS-303 of size 1880mmx900mm duly fixed in position with 50mm long 8mm dia flat head nut , bolts and washers. complete all as specified and shown on drg. Make- Archid/Century/Greenply

Removing the old unserviceable MS conduit pipe stiffeners,Supply and fixing new MS conduit pipe stiffeners of 25mm dia of 18 guage to charpoy through welding. complete all as specified and shown on drg.

Removing of old unserviceable PVC shoes,Supply and fixing new best quality PVC shoes of dia 25mm and height 30mm shall be provided to legs of charpoy.complete all as specified and shown on drg.

Painting the charpoy folding with one coat of Dark Grey hammer tone paint with spray machine of approved quality after preparation of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.

a). Removal of existing unserviceable/broken wooden part from furniture article carefully without disturbing the adjoining parts. Supply and fixing new parts as per given specification and drg after tightening the joints by pinning, screwing, nailing, wedging, glueing, providing hinges, placing every part intact including polishing/painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge. All furniture items is to be painted /poilshed only after making the entire item intact by tightening the joints. b). Work will be executed inside Barrack Store yard of GE(Nagrota) and at various sites as per requirement. c). All Timber shall be of 1st class fully seasoned hard teak wood free from knots and cracks. d). Ply shall be BWR Grade-AA of approved make/brand and shall confirm to IS-303. e). All other material to be incorporated in the work shall be of latest IS standard specification. f). Anti-termite and anti-bug treatment shall be done before polishing the wooden item. g). Painting/polishing shall only be done with spary machine only.

SOFA SET 4/5 SEATER, FD-281/373

Removing old ,supply and fixing new leg of size 70mm x 35mm x 515mm made of 1st class teak wood using screws only with proper workmanship complete all as specified ,shown on drawing and as directed.

Removing old ,supply and fixing new arm of size 70mmx35mmx745mm made of 1st class teak wood using screws only with proper workmanship complete all as specified ,shown on drawing and as directed.

Removing old ,supply and fixing new batten of size 50mmx20mmx585mm made of 1st class teak wood using screws only with proper workmanship complete all as specified ,shown on drawing and as directed.

Removing old ,supply and fixing new front long rail of three seater size 100mmx35mmx1630mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed.

Removing old ,supply and fixing new front long rail of single seater size 100mmx35mmx570mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed.

Removing old ,supply and fixing new short rail of size 100mmx35mmx625mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed.

Removing old ,supply and fixing new long bearer of size 40mmx40mmx1590mm made of 1st class teak wood using screws only with proper workmanship complete all as specified ,shown on drawing and as directed.

Removing old ,supply and fixing new short bearer of size 40mmx40mmx530mm made of 1st class teak wood using screws only with proper workmanship complete all as specified ,shown on drawing and as directed.

Removing old ,supply and fixing new rail to back frame of size 70mmx35mmx1590mm made of 1st class teak wood using screws only with proper workmanship complete all as specified ,shown on drawing and as directed.

Taking out old pressed /torn cushions from each set and Supply of 40 density ,100mm thick PU foam cushion of size 520mmx560mmx100mm duly covered with inner linen cloth and best tapestry cloth not less than Rs 300 per metre and not less than 360 GSM of approved color and shade. Each cushion cover shall be provided with best quality polyester zipper stitched on one edge of cushion cover covered under the flap of cloth with standard fitting. Tapestry cloth:- It shall be heavy linen look fabric, plain velvet fabric or as per approved sample placed in BSO yard . Make of Foam 40 density-Kurlon/Sleepwell/U-foam Make of Tapestry cloth:- D'decor/Drone/Milestone/Asmara or as per approved sample

Scratching the entire wooden pallets of sofa with sand emery paper of various grit , filling the pores with wood filler to make good the surface,After prepartion of surface the entire sofa chair shall be polished in french finish in high gloss with spary machine only. Make of french polish-Asian paints/Berger paints

CHAIR DINING , FD-279,262,228

Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood as per drg.

Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood as per drg.

Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg.

Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg.

Removing the old unserviceable rail and supply and fixing new rail of 1st class teak wood as per drg.

Supply of wooden brackets made to shape in size 3"x 3" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails.

Removing the existing unserviceable cane plastic and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat shall weaved with 4mm wide cane.The canning of chairs shall only be carried out after complete polishing process as specified and as shown on drgs.

Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment.

CHAIR EASY, FD-229,358 :-

Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg.

Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg.

Removing the old unserviceable rail and supply and fixing new rail of 1st class teak wood as per drg.

Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood as per drg.

Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood as per drg.

Removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg.

Supply of wooden brackets made to shape in size 3"x 3" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails.

Removing the existing unserviceable cane plastic and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat and back shall weaved with 4mm wide cane.The canning of chairs shall only be carried out after complete polishing process as specified and as shown on drgs.

Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment.

CHAIR WRITING, FD-261,280,250:-

Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood as per drg.

Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood as per drg.

Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg.

Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg.

Removing the old unserviceable rail and supply and fixing new rail of 1st class teak wood as per drg.

Removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg.

Supply of wooden brackets made to shape in size 3"x 3" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails.

Removing the existing unserviceable cane plastic and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat shall weaved with 4mm wide cane.The canning of chairs shall only be carried out after complete polishing process as specified and as shown on drgs.

Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment.

CHAIR VERANDAH:-, FD-256 ,259

Spot gas welding to broken parts/joints of chairs.

Removing of existing torn out/unserviceable plastic cane/niwar from chair verandah and recanning the chair fully both seat and back with new plastic cane of virgin quality white, half round of size 4mm wide and 0.60 mm thick.complete all as specified and shown on drawing.The canning shall only be done after painting the chair.

Removing the old broken shoes of chairs and Supply and Fixing best quality new PVC shoes to the legs of chair.

Removing the existing unserviceable/broken PVC seat and back from the chair,supply and fixing new PVC seat and back 4mm thick to the chair verandah MAP after providing one flat iron of size 20mmx5mm in support of PVC seat at centre between two sides through proper welding .The PVC seat shall got approved from GE before supply.The PVC seat shall be fied only after painting the chair.

Painting the frame of the chairs by two coats of synthetic enamel white of approved quality paint after prepartion of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.The chair frame shall be made smooth by applying metal putty whereever required.

HAT STAND WITH MIRROR, FD-233/361

Removing old,Removing old,S&F new Front teak face plywood 4mm thick of size 1000mmx710mm as per drg

Removing old,Removing old,S&F new Back Commercial plywood 4mm thick of size 1000mmx710mm as per drg

Removing old,Removing old,S&F new Wooden frame member of size 1000mmx20mmx50mm as per drg.

Removing old,Removing old,S&F new 5mm thick looking mirror of size 440mmx300mm duly fixed with teak wood beading made out of 10mmx12mm section .

Removing old,Removing old,S&F new Teak wood beading of size 710mmx35mmx6mm as per drg.

Removing old,Removing old,S&F new Teak wood beading of size 1000mmx35mmx6mm as per drg.

Removing old,Removing old,S&F new Brass Peg of size 120mm long duly fixed with brass screws as per drg.

Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine only

TABLE 3' X 2' WITH DRAWER, FD-283 :-

Removing old,Removing old,S&F new Top of size 900mmx600mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood.

Removing old,Removing old,S&F new Legs of size 760mmx30mmx60mm made of 1st class teak wood as per size on drg

Removing old,Removing old,S&F new Top long rail of size 900mmx20mmx110mm made of 1st class teak wood as per size on drg

Removing old,Removing old,S&F new Top Short rail of size 600x20mmx110mm made of 1st class teak wood as per size on drg

Removing old,Removing old,S&F new Bottom rail of size 600mmx20mmx60mm made of 1st class teak wood irrespective of what is shown in drg ,made of 1st class teak wood as per size on drg

Removing old,Removing old,S&F new Centre stiffener of size 900mmx20mmx60mm in between bottom rail irrespective of what is shown in drg ,made of 1st class teak wood

Removing old,Removing old,S&F new Front facia of drawers of size 100mmx 300mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick beading of teak wood .

Removing old,Removing old,S&F new Bottom ply of drawers of size 540mmx300mm made out of 6mm plywood BWR fixed to side ply in groove as shown in drg.

Removing old,Removing old,S&F new Sides of drawers of size 100mm x 540mm made out of 12mm thick BWR plywood with edges duly covered with 4 mm thick beading of teak wood

Corner shape wooden bracket of size 100mmx100mmx20mm shall be fixed to legs and rail with adhesive and screws.

Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine only.

TEAPOY WOODEN, FD-232 & 278 :-

Removing old,Removing old,S&F new Top of size 600mmx450mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood.

Removing old,Removing old,S&F new Legs of size 520mmx60mmx30mm made of 1st class teak wood as per size on drg

Removing old,Removing old,S&F new Top long rail of size 600mmx 50mmx20mm made of 1st class teak wood as per size on drg

Removing old,Removing old,S&F new Bottom rail of size 450mmx50mmx20mm made of 1st class teak wood as per size on drg

Removing old,Removing old,S&F new Long Stiffener of size 600mmx20mmx50mm in between two bottom rails irrespective of what is shown in drg ,made of 1st class teak wood.

Corner shape wooden bracket of size 75mmx75mmx20mm thick shall be fixed to legs and rail with adhesive and screws.

Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine only.

TABLE CENTRE , FD-274 :-

Removing old,Removing old,S&F new Top of size 900mmx450mm made out of 18mm thick prelaminated MDF board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood

Removing old,Removing old,S&F new Legs of size 400mmx30mmx60mm made of 1st class teak wood as per size on drg

Removing old,Removing old,S&F new Top long rail of size 900mmx20mmx50mm made of 1st class teak wood as per size on drg

Removing old,Removing old,S&F new Top short rail of size 450mmx20mmx50mm made of 1st class teak wood as per size on drg

Removing old,Removing old,S&F new Bottom Rail of size 450mmx20mmx50mm Short Stiffener made of 1st class teak wood as per size on drg

Removing old,Removing old,S&F new Centre stiffener of size 900mmx20mmx50mm in between bottom rail irrespective of what is shown in drg ,made of 1st class teak wood

Corner shape wooden bracket of size 75mmx75mmx20mm shall be fixed to legs and rail with adhesive and screws.

Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine only

TABLE WRITING, FD-275 :-

Removing old,Removing old,S&F new Top of size 1145mmx600mm made out of 18mm thick prelaminated MDF board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood

Removing old,Removing old,S&F new Top Long rail of size 740mmx25mmx50mm made of 1st class teak wood as per drg

Removing old,Removing old,S&F new Top Short rail of size 600mmx25mmx50mm made of 1st class teak wood as per drg

Removing old,Removing old,S&F new back ply of size 596mmx400mm made of 6mm plywood as per drg

Removing old,Removing old,S&F new Bottom stiffener of size 1145mmx25mmx50mm in between two short stiffeners irrespective of what is shown in drg ,made of 1st class teak wood

Removing old,Removing old,S&F new Sides of compartment of size 592mmx600mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick beading of teak wood

Removing old,Removing old,S&F new Front face of drawers of size 120mmx370mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick beading of teak wood .

Removing old,Removing old,S&F new Front face of shutter of size 590mmx600mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick beading of teak wood .

Removing old,Removing old,S&F new Bottom ply of drawers of size 370mmx540mm made out of 6mm plywood BWR fixed to side ply in groove as shown in drg.

Removing old,Removing old,S&F new Sides of drawers of size 120mmx540mm made out of 12mm thick BWR plywood with edges duly covered with 4 mm thick beading of teak wood

Removing old,Removing old,S&F new Legs of size 740mmx35mmx55mm made of 1st class teak wood as per drg

Removing old,Removing old,S&F new Handle of size 100mm long chrome plated.

Corner shape wooden bracket of size 100mmx100mmx25mm thick shall be fixed to legs and rail with adhesive and screws.

Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine only.

TABLE BED SIDE, FD-276:-

Removing old,Removing old,S&F new Top of size 450mmx230mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood.

Removing old,Removing old,S&F new Sides of size 510mmx 230mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood.

Removing old,Removing old,S&F new Shelves of size 414mmx224mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood.

Removing old,Removing old,S&F new Bottom of size 414mmx224mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood.

Removing old,Removing old,S&F new Back ply of size 392mmx432mm made of 6mm BWR plywood duly fixed with adhesive and headless nails as per drg.

Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine only.

TABLE PEG , FD-236/277/384:-

Removing old,Removing old,S&F new Top of size 450mmx300mm made out of 18mm thick prelaminated MDF board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood

Removing old,Removing old,S&F new Legs of size 362mmx30mmx50mm made of 1st class teak wood as per drg

Removing old,Removing old,S&F new Top long rail of size 450mmx20mmx40mm made of 1st class teak wood as per drg

Removing old,Removing old,S&F new Bottom side rail of size 300mmx20mmx40mm made of 1st class teak wood as per drg

Removing old,Removing old,S&F new Bottom Stiffener of size 450mmx20mmx40mm in between two short stiffeners irrespective of what is shown in drg ,made of 1st class teak wood

Corner shape wooden bracket of size 75mmx75mmx20mm shall be fixed to legs and rail with adhesive and screws.

Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish by spray machine only.

TABLE DINING FOR 6 PERSONS, FD/MAP-II/03/FD-273/FD-1115:-

Removing old,Removing old,S&F new Top of size 1500mmx900mm made out of 18mm thick prelaminated MDF board exterior grade,natural teak color, edges duly covered with 4 mm thick beading of teak wood

Removing old,Removing old,S&F new Legs of size 705mmx90mmx45mm made of 1st class teak wood as per drg

Removing old,Removing old,S&F new Long rail of size 1500x45mmx90mm made of 1st class teak wood as per drg

Removing old,Removing old,S&F new Short rail of size 900mmx45mmx90mm made of 1st class teak wood as per drg

Removing old,Removing old,S&F new Top stiffeners of size 900mmx25mmx90mm made of 1st class teak wood as per drg

Corner Shape wooden bracket of size 100mmx100mmx35mm thick shall be fixed to legs and rail with adhesive and screws.

Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish by spray machine only

TABLE DRESSING GENTS, FD-230

Removing old,Removing old,S&F new looking mirror of size 760mm x 380mm with thickness 5mm .The back of mirror shall be supported by providing 6mm thick BWR -grade-A .Complete all as specified and as shown on drawing.

Removing old,Removing old,S&F new top of size 900mmx300mm to the table dressing gents made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front. Complete all as specified and as shown on drawing

Removing old,Removing old,S&F new sides of size 150mmx300mm to the table dressing gents made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front. Complete all as specified and as shown on drawing

Removing old,Removing old,S&F new bottom of size 900mmx300mm to the table dressing gents made out of 12mm thick BWR-grade-A plywood.Complete all as specified and as shown on drawing

Removing old,Removing old,S&F new back of size 900mmx150mm to the table dressing gents made out of 12mm thick BWR -grade-A plywood. Complete all as specified and as shown on drawing

Removing old,Removing old,S&F new vertical members at back of mirror of size 35mmx25mm made out of teak wood .Complete all as specified and as shown on drawing

Removing old,Removing old,S&F new drawer made out of 18mm thick prelaminated MDF board [ISI Marked] exterior grade duly providing 4mm thick teak wood beading on top and base of 6mm BWR plywood including chrome plated 30mm dia decorative knob to each drawer.Complete all as specified and as shown on drawing

Polishing to dressing table gents with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment..

SOFA CHAIR SINGLE SEATER WITH CUSHION (Drg No. TP/FD-1113)

Removing old material i.e- zig zag upholstery metal springs,tapestry cloth,lining cloth, foam cushion from each seat, supply and fixing new zig zag metal springs of 12 guage,new tapestry cloth of rate not less than 350 per mtr in 560 GSM thickness of approved colour and shade, best quality lining cloth, 40 density PU foam cushion of thickness 150mm to restore the seat in the same shape.The bottom of seat shall be packed with best qulaity hessian cloth and to be fixed with stapler pins. Tapestry cloth:- It shall be heavy linen look fabric ,plain velvet fabric or as per approved sample placed in BSO yard . Make of Foam 40 density-Kurlon/Sleepwell/U-foam Make of Tapestry cloth:- D'decor/Drone/Milestone/Asmara or as per approved sample

Removing old materail i.e-elastic webbing tape,tapestry cloth,lining cloth, foam cushion from each back ,supply and fixing new elastic webbing tape 75mm wide,new tapestry cloth of rate not less than 350 per mtr in 560 GSM thickness of approved colour and shade, best quality lining cloth,40 density PU foam cushion of thockness 150mm to restore the seat in the same shape.The back of seat shall be packed with same tapestry cloth with proper workmanship. Tapestry cloth:- It shall be heavy linen look fabric ,plain velvet fabric or as per approved sample placed in BSO yard . Make of Foam 40 density-Kurlon/Sleepwell/U-foam Make of Tapestry cloth:- D'decor/Drone/Milestone/Asmara or as per approved sample

Removing old ,supply and fixing new legs of size 70mmx25mmx495mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed.

Removing old ,supply and fixing new arm of size 70mmx25mmx745mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed.

Scratching the entire wooden pallets of sofa chair with sand emery paper of various grit , filling the pores with wood filler to make good the surface,After prepartion of surface the entire sofa chair shall be polished in french finish in high gloss with spary machine only. Make of french polish-Asian paints/Berger paints

A) Removal of existing unserviceable/broken wooden/steel/PVC part from furniture article carefully without disturbing the adjoining parts.Supply and fixing new parts as per given specification and drg after tightening the joints by arc/gas welding making every part in-tact including painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge.All furniture items is to be painted only after making the entire item intact by tightening the joints. B). Work will be executed inside Barrack Store yard of GE(Nagrota) and at various sites as per requirement. C). All steel sections shall be as per standard IS . D). Plywood/MDF shall be BWR grade-A /exterior grade of approved make/brand and shall confirm to IS-303. E). All other material to be incorporate in the work shall be of latest IS standard specification. F). Anti-termite and anti-bug treatment shall be done before polishing the wooden item. G). Painting shall only be done with spray machine only. H). Painting will only be caried out after removing/peeling the existing paint by using paint remover.

ALMIRAH LARGE STEEL WITH SHELVES, FD-67(M)/ 1031:-

Removing UNSV door shutter carefully by unriveting the hinges, S&F new door shutter made of 1 mm thick MS sheet of same size and shape duly fixed to almirah large steel with new 80mm long MS hinge. Complete all as directed and shown on drawing.

Removing UNSV lock from shutters of almirah large steel; S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks- Godrej/Harrison/Link.

Removing UNSV handle from almirah steel large, S&F new 130mm long chromium plated handle to steel shutters, Complete all as directed and shown on drawing.

Removing UNSV/damaged shelf carefully by removing the rivets and welding spots, S&F new shelf made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing UNSV/damaged bottom portion carefully by removing rivets and welding spots and S&F new bottom made of 1 mm thick MS sheet of same size and shape by welding . Complete all as directed and shown on drawing.

Removing UNSV leg from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts.S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting.Complete all as directed and shown on drawing.

Spot gas welding

Completely removing all dents from almirah by smooth hammering, preparing the almirah by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete almirah as per approved colour/shade by Engr-in Charge/GE after application of red oxide primer. The painting to each article shall only be carried out by spray machine only.

ALMIRAH STEEL MEDIUM WITH SHELVES,FD-67(M)/1032

Removing UNSV door shutter carefully by unriveting the hinges, S&F new door shutter made of 1 mm thick MS sheet of same size and shape duly fixed to almirah steel Medium with new 80mm long MS hinge. Complete all as directed and shown on drawing.

Removing UNSV lock from shutters of almirah steel Medium S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing. Make of Locks-Godrej/Harrison/Link

Removing UNSV handle from the almirah steel Medium, S&F new 130mm long chromium plated handle to steel shutters ,Complete all as directed and shown on drawing

Removing UNSV/damaged shelf carefully by removing the rivets and welding spots, S&F new shelf made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing UNSV/damaged bottom portion carefully by removing rivets and welding spots and S&F new bottom made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing UNSV leg from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts.S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting.Complete all as directed and shown on drawing.

Spot gas welding

Completely removing all dents from almirah by smooth hammering ,preparing the almirah by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete almirah as per approved colour/shade by Engr-in Charge/GE after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

BOOK CASE STEEL GLAZED , FD-1028/FD-69:-

Removing UNSV lock from shutters of book case steel, S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing. Make of Locks-Godrej/Harrison/Link

Removing UNSV handle from book case steel ,S&F new 130mm long chromium plated handle to each openable shutter ,Complete all as directed and shown on drawing

Removing UNSV/damaged shelf carefully by removing the rivets and welding spots, S&F new shelf made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing UNSV/damaged bottom portion carefully by removing rivets and welding spots and S&F new bottom made of 1 mm thick MS sheet of same size and shape by welding . Complete all as directed and shown on drawing.

Removing UNSV leg from bottom of book case steel carefully by unriveting and using hand held cutting machine without damaging the other parts. S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting.Complete all as directed and shown on drawing.

Completely removing all dents from book case by smooth hammering ,preparing the book case by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete book case as per approved colour/shade by Engr-in Charge/GE after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

CHAIR EXECUTIVE REVOLVING/ CONFERENCE:-

Removing the existing torn out tapestry cloth, pressed foam cushion,elastic webbing tape, PVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully.S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than 200 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film. Complete all as specified and as directed.

Removing the existing torn out tapsetry cloth from seat and back of chair carefully after removing the PVC lipping.S&F new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than 200 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.Complete all as specified and as directed.

Removing old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge.

Painting to all steel portion of chair with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth.Complete all as directed and shown on drawing.

LOCKER STEEL, FD-257/1029:-

Removing UNSV/damaged door shutter carefully by removing the hinges and S&F new shutter made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing UNSV/damaged shelf carefully by removing the rivets and welding spots and S&F new shlef made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing the existing unserviceable rusted conduit pipe from the side flanges ,S&F new 20mm dia conduit pipe along with side flanges. Complete all as directed and shown on drawing.

Removing UNSV handle from both shutters of locker steel and S&F new 100mm long chromium plated steel handle of ISI marked with riveting to both steel shutters ,Complete all as directed and shown on drawing.

Removing the existing unserviceable hasp and staple from locker steel and S&F new hasp and staple of size 75mmx40mm of 3mm thickness with riveting to steel shutters. Complete all as directed and shown on drawing.

Removing UNSV leg from bottom of lockers carefully by unriveting and using hand held cutting machine without damaging the other parts.S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting. Complete all as directed and shown on drawing.

Continous gas welding to all broken joints of table in length of 1 cm

Completely removing all dents from locker by smooth hammering ,preparing the locker by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete locker as per approved colour/shade by Engr-in Charge/GE after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

TABLE OFFICE CLERK STEEL,FD-84(M)/1004 :-

Removing UNSV top carefully; S&F new top of size 1200mmx610mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing the existing unservicable /rusted drawer; S&F new drawer made of 1mm MS sheet as per size and dimension with 100 mm long chrome plated handle fixed at front.. Complete all as directed and shown on drawing.

Removing UNSV lock from drawers and shutter; S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing the old broken PVC shoes from the legs of table, S&F new PVC shoes of size 25mmx25mm having metal washers fitted inside at bottom.

Continous gas welding to all broken joints of table in length of 1 cm

Completely removing all dents from table by smooth hammering ,preparing the table by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete table as per approved colour/shade by Engr-in Charge/GE after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

TEAPOY VERANDAH, FD-35/255:-

Removing UNSV top from teapoy verandah carefully;S&F new top of size 900mmx450mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing old UNSV shoes, Supply and fix new PVC shoe suitable to each leg. Complete all as directed and as shown on drawing.

S&F long stiffener of length 750mm of conduit pipe of 20mm dia of wall thickness 1.6mm welded in between the short siffeners at bottom of teapoy,irrespective of what is shown in drg

S&F short stiffener of length 350mm of conduit pipe of 20mm dia of wall thickness 1.6mm welded in between the legs of teapoy,irrespective of what is shown in drg

Completely removing all dents from teapoy by smooth hammering ,preparing the teapoy by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete teapoy after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

TABLE DINING FOR OR'S STEEL, FD-165(M) :-

Removing UNSV top from table dining OR's steel carefully;S&F new top of size 1900x685mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing old UNSV shoes,Supply and fix new PVC shoe suitable to each leg .complete all as directed and as shown on drawing.

Completely removing all dents from table by smooth hammering ,preparing the book case by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth, then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint shall be applied externally and internally to complete table as per approved colour/shade by Engr-in Charge/GE after application of red oxide primer.The painting to each article shall only be carried out by spray machine only.

CHAIR CB STEEL TUBULAR WITH ARM, FD-75(M):-

Scratching the entire frame of chair and applying two coat of synthetic enamel paint as per approved colour/shade by Engr-in Charge/GE after preparation of surfaces by removing the old paint with sand emery paper. Complete all as specified and as directed by Engr-in-Charge

Remvoing the old unserviceable/broken MS flat,supply and fixing MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat.

Removing the old unserviceable seat from the frame of the chair. Supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

Removing the old unserviceable back from the frame of the chair. Supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

Removing the old unserviceable arm,supply and fixing new arm of 1st class teak wood in natural shade as per drg.

Removing the old unserviceable hard rubber toes,supply and fixing new Hard rubber shoes to the bottom frame of chair as per drg.

Removing the old unserviceable rubber caps and supply and fixing new rubber caps on the top of rear legs as per drg.

M/S NEW SUBBERWAL FURNISHERS (BID ID -3378380)

PUSHPAK INDUSTRIES (BID ID -3377366)

M/S ARUN ANAND (BID ID -3377233)

VEE KAY IND (BID ID -3367748)

VARDHMAN INTERNATIONAL (BID ID -3377204)

KHAZAN SINGH SAWHNEY (BID ID -3364363)

M/S Shesh Paul Gupta (BID ID -3376975)

JP AND CO. (BID ID -3376693)

M/s Sunny Gupta (BID ID -3376671)

MOHAN BROTHERS (BID ID -3377087)

M/S CHANDER SHEKHAR (BID ID -3377795)