REPAIR/ MAINT OF STREET/ SECURITY LIGHT, GATE LIGHT, HIGH MAST LIGHT, FITTING, PERIMETER LIGHT AND PAINTING OF POLE AT AWC UNDER GE (AWC) MHOW

Amount

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, pipes etc. and getting out including trimming the sides and forming bottom surfaces to required levels in any type of soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in any type of soil complete all as specified and directed.

Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

M& L of river washed and screened dry fine sand filling in trenches below and above / around under ground cable for cable protection, in duct under & abobe the cables including punning around cable complete all as specified and directed.

Supply and laying unreinforced PCC Cable protection cover , class LV, type -1 flat,with peak size 250 x 150 x 40 mm laid flate width wise complete all as specified and directed.

Supply and laying galvanised iron pipe 'light Grade' 40 mm in trenches , under floors, roads, along poles for protection of cables with all necessary fittings, including sealing ends complete all as specified and directed. Make:- Jindal, Prakash Surya, Tata

Drilling ( Horizontaliy) existing road (Maximum 10 mtr wide) suitable for passing GI tubing 40 mm complete as specified. Note: GI tubing shall be measured and paid separately.

Supplying, laying, fixing, jointing and testing LT under ground electric power cable of size 10 Sqmm 2 Core Crossed linked polyethylene ( XLPE Cable) insulated, galvanised steel strip or wire armoured, ISI-7098 Marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade , with electric connection lugs complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc.( Excavation, earth work, sand cushioning, protection bricks/ tiles/ block,Clamps, nuts , bolts, washers and pipe shall be measured and paid separately under appropriate items Size as following. Make:-Gloster, RPG (Asian), Polycab.

Description same as per item No 08.00 above but 10 Sqmm 4 Core

Description same as per item No 08.00 above but 16 Sqmm 4 Core

M & L painting of security light steel tubular pole 8.5/ 9 Mtr length including clamp, bracket and junction box with two coats of aluminium paint after preparation of old painted surface and providing 03 No alternate strip of 30 cm wide with black and white super quality enamel paint above embeded level and writing pole No with 2 inch wide letter complete all as specified and directed by Engr-in-Charge. Make of Paints:- ICI Paint/ Shalimar Paints/ Berger Paint

Supply, fixing, testing and commissioning in replacement energy saving long life LED Street light fitting pressure die cast aluminium housing (LM6 alloy) minimum 6500/8200 lumens with maximum system wattage 75 watt LED inbuilt potted Driver, CCT5700, CRI>70,PF>0.95, 4KV surge protection (inbuilt) and operating voltage of 140-270 VAC. pressure die cast exoxy power coated alluminium housing with effcient designed heat shrink with heat resistent toughned glass with frame fixed with SS Screws suitable for fixing the exiting steel tubler pole and including nut bolt as per site requirement complete with ingress protection IP- 66 CC temperture 5700K total harmonic distortion THD is ≤ 10% complete all as specified and directed by Engr-in-Charge. Make:- Bajaj Cat Part No- BRTFG 75W LED I , Havells Cat part No- ENDURACITYLINERNEOSL70WLED757PASYBOTG , Philips model no-BRP062LED 68/84 CW SLA S1PSU.

Supply, fixing, testing and commissioning in replacement energy saving long life LED Street light fitting pressure die cast aluminium housing (LM6 alloy) minimum 11500/13000 lumens with maximum system wattage 90 watt LED inbuilt potted Driver, CCT5700, CRI>70,PF>0.95, 4KV surge protection (inbuilt) and operating voltage of 140-270 VAC. limanaries 90 watt LED pressure die cast exoxy power coated alluminium housing with effcient designed heat shrink with heat resistent toughned glass with frame fixed with SS Screws suitable for fixing the exiting steel tubler pole and including nut bolt as per site requirement complete with ingress protection IP- 66 class -1 color temperture 5700K power factor not less then 0.95 , total harmonic distortion THD is ≤ 10% complete all as specified and directed by Engr-in-Charge. Make:- BRTFG 90W LED IV2 and Havells Cat part No- ENDURAPEARLMAGNUMSL100WLED757PASYTOTGAST. and Philips model no-BRP409 LED 130CW SLC/SLA FG PSU GR V2.

Supply, fixing, testing and commissioning in replacement energy saving long life LED Street light fitting limanaries 45 watt LED pressure die cast exoxy power coated alluminium housing with effcient designed heat shrink with heat resistent toughned glass with frame fixed with SS Screws suitable for fixing the exiting steel tubler pole and including nut bolt as per site requirement complete with ingress protection IP- 66 class -1 color temperture 5700K power factor not less then 0.95 , total harmonic distortion THD is ≤ 10% complete all as specified and directed by Engr-in-Charge. Make:-Bajaj CAT part No BRTFG 45W LED V3 AND BRTFG 45W LED V2 AND Havells cat part No-ENDURACITYLINEOSL 60WLED757 PASYTOPC AND Philips model no-BRP062 LED65/82CW SLA S1 PSU.

Supply, fixing, testing and commissioning in replacement energy saving long life LED 45W (gate light fitting) post top made in cast aluminium with decorative with innovative glare free indirect lighting distribution & IP 65 protection and alluminium housing with effcient designed heat shrink with heat resistent toughned glass with frame fixed with SS Screws suitable for fixing including bulb, nut bolt as per site requirement complete all as specified and directed by Engr-in-Charge. Make:-Bajaj CAT part No BRIL 45 W LED NW AND Wipro Cat part No- LP02-501-XXX-57-XX equvalent in Philips/ Havells

Supply, fixing, testing and commissioning in replacement energy saving long life LED 40W (gate light fitting) post top made in cast aluminium with decorative opal polycarbonate diffuser and IP 65 protection and alluminium housing with effcient designed heat shrink with heat resistent toughned glass with frame fixed with SS Screws suitable for fixing including nut bolt as per site requirement complete all as specified and directed by Engr-in-Charge. Make:-Bajaj CAT part No BGCL 40 W LED WH AND BGCS 40W LED WH AND C&S Cat part No- LTGLM40WHPLED/W equivalent in Philips/ Havells

M&L for Lowering carefully light fittings from high mast ( 15-20 M) high for maintenace / repairs of light fittings and refixing the light fittings after repairs complete all as specified and directed by Engr-in-Charge. (Note:- Payment under this item shall be made only once a time during the Contract period.) Note:- Spair parts shall be measured and paid separately.

Supply, fixing, testing and commissioning in replacement of nature switch of capacity12 KW 3 phase consisting of power contactor of suitable rating MCB complete. Make:-Legrand, ABB, L&T, Schnieder, Hager.

Supply, fixing, testing and commissioning in replacement of nature switch of capacity 8 KW single phase consisting power contactor of suitable rating , complete. Make:-Legrand, ABB, L&T, Schnieder, Hager, Swadeep.

Disconnecting and taking down street /security light fitting for LED Light of any size /capacity /make from the pole /Bldg for repair /Replacment of UNSVspare parts etc after testing, cleaning the fitting internally and externally and replacement of unserviceable wiring not more than 0.3 Mtrs with 1.5 sqmm PVC insulate copper wire, checking and repairing of loose connections, replacement of wire connector, nuts, bolts, screws and fixing the light fitting in original position on wall/pole/santry post/top of building including necessary electrical connection complete all as specified and directed by Engr-in-Charge. Note:- Driver and SPD shall be measured and paid separately.

Supply, fixing, testing and commissioning in replacement SPD for LED Street light/ flood light fitting suitable surge cap complete all as specified and directed by Engr-in-Charge. Make:- Bajaj, Havells, C&S

Supply, fixing, testing and commissioning in replacement Driver for LED Street light/ flood light suitable surge cap complete all as specified and directed by Engr-in-Charge. Make:- Bajaj, Havells, C&S

S & F in replacement of security light bracket with GI Pipe light grade of size 40 mm dia bend to shape of lenth 1.2 mtr long including flat iron clamp made of FI 50 mm x 6 mm(two Nos per GI pipe brackets) , nuts, bolts, washers etc duly paited with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

Supplying and fixing in replacement of PVC junction box of size 205mmX255mm X112mm , including connector block , two holes for incoming and outgoing cables, providing cable glands double compression as per requirement, providing DIN rail for mounting MCB and Clamps made out of MS FI 25X4mm, MS hexagonal bolts, nuts and washers for arrangements to pole/ surfaces complete all as specified and directed by Engr-in-Charge. Make-Hensel /Sintex/ Siemens

Supply, fixing, testing and commissioning in replacement energy saving long life LED Flood light fitting pressure die cast aluminium housing (LM6 alloy) minimum 11500/13000 lumens with maximum system wattage 200 watt LED inbuilt potted Driver, CCT5700, CRI>70,PF>0.95, surge protection (inbuilt) and operating voltage of 140-270 VAC. limanaries 200watt LED pressure die cast exoxy power coated alluminium housing with effcient designed heat shrink with heat resistent toughned glass with frame fixed with SS Screws suitable for fixing the exiting steel tubler pole and including nut bolt as per site requirement complete with ingress protection IP- 66 class -1 color temperture 5700K power factor not less then 0.95 , total harmonic distortion THD is ≤ 10% complete all as specified and directed by Engr-in-Charge. Make:-Bajaj cat part No- BARFEG 200 W LED and BJFL240W LED and equivalent in Havells / Philips

Supplying and fixing in replacement of PVC LT Line separators 1100 volte grade spacer to separate lt conductor from each other 4 line as per IS complete all as specified and directed by Engr-in-Charge. Make:-Finolex, Modi, Jindal

shanti electricals

S.S. Engineers

AGARWAL BUILDERS

Vinayak Trading House

Electromech Engineers

m/s bansal construction